Contec VPC-1600 Owner's manual

FA Computer

Space-Saving Model

VPC-1600

User’s Manual

CONTEC CO., LTD.

VPC-1600 Series

i

Check Your Package

Thank you for purchasing the CONTEC product.

The product consists of the items listed below.

Check, with the following list, that your package is complete. If you discover damaged or missing

items, contact your retailer.

Product Configuration List

VPC-1600 Series

Name Pcs

VPC-1600 1

Wall Mount stand 2

Vertical stand

1

*2

AC power cable (AC 125V) 1

Com4 backet cable

1

*5

DVI-analog RGB conversion adapter 1

I/O terminal connector 2

Insulation lock

8

Rubber feet 4

#6-32X5 inch

countersunk screws

(Hard disk fixation screw) 1 set

*1

M3x6 pan head screws (Board fixing screw)

6

M4x6 truss head screws (Wall mount stand fixing screw)

12

Keyboard

1

*2

Mouse

1

*2

Nameplate 1

VPC-1600 product guide

1

Product Registration Card & Warranty Certificate

1

Serial number label 1

Recovery disc/Driver disc

1

*3

OS royalty consent contract

1

*4

*1 Attach the four screws to the hard disk bay one.

*2 Attach when you select the option.

*3 OS installation model attach the recovery disc.

No OS installation model attach the driver disc.

*4 OS installation model attach.

*5 This is not included when the COM4 mounting option is selected.

ii VPC-1600 Series

Copyright

No part of this document may be copied or reproduced in any form by any means without prior written

consent of CONTEC CO., LTD.

CONTEC CO., LTD. makes no commitment to update or keep current the information contained in

this document. The information in this document is subject to change without notice.

All relevant issues have been considered in the preparation of this document. Should you notice an

omission or any questionable item in this document, please feel free to notify CONTEC CO., LTD.

Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may

appear in this document or for results obtained by the user as a result of using this product.

Trademarks

MS, Microsoft, Windows and Windows NT are trademarks of Microsoft Corporation. Other brand and

product names are trademarks of their respective holder.

Wall Mount stand

Vertical stand

AC power cable

CONTEC

VPC-1600

Nameplate

I/O terminal

connector

Insulation lock

Rubber feet

#6-32X5 inch

countersunk screws

M3x6

pan head screws

XXXXXXXXXXXXX

Serial number label

Product guide

DVI-analog RGB

conversion adapter

Com4 backet cable

Recovery disc/Driver disc

VPC-1600

Keyboard

Mouse

M4x6

truss head screws

Product guide

Product Regis tration

Card &

Warranty Certificate

Product Registration Card &

Warranty Certificate

VPC-1600 Series

iii

Table of contents

Check your package ............................................................................................................................. i

Copyright ............................................................................................................................................ ii

Trademarks ......................................................................................................................................... ii

Table of contents................................................................................................................................ iii

1. BEFORE USING THE PRODUCT 1

About the Computer ........................................................................................................................... 1

Features ........................................................................................................................................ 2

Commodity model ....................................................................................................................... 3

Supported OS ............................................................................................................................... 3

Customer Support ............................................................................................................................... 4

Web Site ....................................................................................................................................... 4

How to Obtain Service........................................................................................................................ 4

Liability ............................................................................................................................................... 4

Safety Precautions .............................................................................................................................. 5

Safety Information ....................................................................................................................... 5

Handling Precautions ................................................................................................................... 5

FCC PART15 Class A Notice ..................................................................................................... 7

2. SYSTEM REFERENCE 9

Specification ....................................................................................................................................... 9

Physical dimensions.......................................................................................................................... 11

3. HARDWARE SETUP 15

Before Using the VPC-1600 for the First Time ............................................................................... 15

Installation requirements ........................................................................................................... 16

Hardware Setup................................................................................................................................. 17

Removing the top cover and drive bay ...................................................................................... 17

Attaching the extension board ................................................................................................... 20

Attach the hard disk ................................................................................................................... 22

Replacing the front fan unit and filter ....................................................................................... 24

Replacing the front fan .............................................................................................................. 26

Attach the horizontal installation bracket .................................................................................. 27

Attach the vertical stand ............................................................................................................ 28

List of motherboard connector and jumper settings ......................................................................... 29

Jumper setting ................................................................................................................................... 31

CMOS clear setting : JP1 ........................................................................................................... 31

ATX/AT mode setting : JP2 ...................................................................................................... 31

COM2 RI mode setting : JP3 ..................................................................................................... 32

iv VPC-1600 Series

COM1 RI mode setting : JP4 ..................................................................................................... 32

Mainborad connector ........................................................................................................................ 33

ATX power connector : J13/J10 ................................................................................................ 33

Fun power connector : J17/J33 .................................................................................................. 34

General purpose I/O connector : J30 ......................................................................................... 35

Internal USB connector : J16, J20, J21 ..................................................................................... 36

Front panel connector : J11........................................................................................................ 37

COM port connector : J24, J25, J28, J29, J36, J37 ................................................................... 38

Audio connector : J6 .................................................................................................................. 39

Parallel port connector : J38 ...................................................................................................... 40

Case open connector : J34 ......................................................................................................... 41

Serial ATA Interface .................................................................................................................. 41

4. BIOS SETUP 43

Starting the setup screen ............................................................................................................ 43

Setup operations ......................................................................................................................... 44

Main menu ................................................................................................................................. 45

Setting of the date and time ....................................................................................................... 45

Setting of the start password ...................................................................................................... 46

Administrator Password ............................................................................................................. 47

User Password ............................................................................................................................ 47

Release of set the password .............................................................................................................. 47

Changing to the device boot order .................................................................................................... 47

Selection of SATA devices ............................................................................................................... 48

Setting for the power on (AT power operation) by the AC power-supply turning on .................... 49

Factory default setting ............................................................................................................... 49

Main .................................................................................................................................................. 50

Configuration .................................................................................................................................... 51

CPU Configuration .................................................................................................................... 51

Chipset Configuration ................................................................................................................ 52

LAN Configuration .................................................................................................................... 53

Graphics Configuration .............................................................................................................. 53

PCI/PCIE Configuration ............................................................................................................ 54

SATA Configuration .................................................................................................................. 55

USB Configuration .................................................................................................................... 56

Power Control Configuration .................................................................................................... 57

Super IO Configuration ............................................................................................................. 58

H/W Monitor .............................................................................................................................. 59

Serial Port Console Redirection ................................................................................................ 59

Boot ................................................................................................................................................... 60

Hard Disk Drive BBS Priorities ................................................................................................ 60

CDROM/DVD Drive BBS Priorities ......................................................................................... 60

Security ............................................................................................................................................. 61

VPC-1600 Series

v

Save & Exit ....................................................................................................................................... 61

5. EACH COMPONENT FUNCTION 63

Component name .............................................................................................................................. 63

VPC-1600 front view ................................................................................................................. 63

VPC-1600 rear view .................................................................................................................. 64

Each component function ................................................................................................................. 65

Keyboard interface ..................................................................................................................... 65

Mouse interface.......................................................................................................................... 65

Serial port interface ................................................................................................................... 66

DVI-I Interface .......................................................................................................................... 67

DisplayPort Interface ................................................................................................................. 68

Parallel port interface ................................................................................................................. 69

Reset swith ................................................................................................................................. 70

Power swith ................................................................................................................................ 70

USB port .................................................................................................................................... 70

Gigabit Ethernet ......................................................................................................................... 71

Digital I/O interface ................................................................................................................... 72

Audio interface .......................................................................................................................... 74

6. SOFTWARE RAID SETUP 75

Starting the setup screen ................................................................................................................... 75

MAIN Window ................................................................................................................................. 76

Create RAID Drive (Mirroring) ....................................................................................................... 77

Delete RAID drive (Mirroring) ........................................................................................................ 79

Software RAID monitoring tool (Raipd Strage Technology) .......................................................... 80

Rapid Strage Technology Install ............................................................................................... 80

Starting the Rapid storage technology ....................................................................................... 80

Exiting the Rapid storage technology........................................................................................ 81

Making of mirroring synchronize .............................................................................................. 82

Create RAID drive (Mirroring) ................................................................................................. 83

Delete RAID drive (Mirroring) ................................................................................................. 86

For the error ............................................................................................................................... 87

Confirming the error log ............................................................................................................ 88

RAID setup when replacing the HDD .............................................................................................. 89

7. HARDWARE RAID SETUP 91

Functional Specification ................................................................................................................... 91

Mirror card specification ........................................................................................................... 91

Locations and settings of switches and connectors ................................................................... 91

Switch Setting ................................................................................................................................... 92

DIP Switch ................................................................................................................................. 92

vi VPC-1600 Series

Internal LED Status .......................................................................................................................... 93

Mirror Card ....................................................................................................................................... 94

Operation flow ........................................................................................................................... 94

For the error ............................................................................................................................... 96

RAID setup when replacing the HDD ....................................................................................... 97

Hot-swap .................................................................................................................................... 98

OS recovery setting ........................................................................................................................... 99

FAQ/Troubleshooting ..................................................................................................................... 100

FAQ .......................................................................................................................................... 100

Troubleshooting ....................................................................................................................... 101

8. APPENDIX 105

Battery specifications...................................................................................................................... 105

Removing the battery when disposing the product ........................................................................ 105

Disposing the battrey ...................................................................................................................... 105

9. LIST OF OPTIONS 107

1. Before Using the Product

VPC-1600 User’s Manual

1

1.

Before Using the Product

This chapter provides information you should know before using the product.

About the Computer

This product is a BTO industrial computer that is equipped with a CPU Intel

®

Core i5 4570TE

processor (2.7GHz) or Celeron G1820TE processor (2.2GHz). The Intel

®

Q87 chipset with DDR3

memory (4GB, 8GB, or 16GB) provides advanced computing and graphical performance. This product

features a variety of interfaces such as 4 USB3.0 ports (rear: 4), 4 USB2.0 ports (front:2, rear:2), 2

1000BASE-T ports, 1 RS-232 port, and 1 parallel port.

The following models are lined up for the VPC-1600 series.

Model

CPU

Memory

HDD

Optical System

OS

VPC-1600-17000B

Celeron

G1820TE

DDR3 4GB

SATA 250GB

(Discontinued)

DVD Super

Multi Drive

None

Windows 7 Professional SP1

32bit Japanese

DDR3 8GB SATA 2TB

Windows 7 Professional SP1

64bit Japanese

Windows 7 Ultimate SPI 32bit

JPN/ENU/CHS

VPC-1600-57000B Core i5 4570TE DDR3 16GB

SATA 2TB

Hardware

Mirroring

(250GB

Discontinued)

Windows 7 Ultimate SPI 64bit

JPN/ENU/CHS/KOR

Windows Embedded 8.1

Industry Pro 64bit Japanese

SATA 2TB

Software Mirroring

(250GB

Discontinued)

Windows 10 IoT Enterprise

2016 LTSB 64bit

JPN/ENU/CHS/KOR

*HDD 250GB Discontinued

Model

CPU

Memory

HDD

Optical Sstem

OS

VPC-1600-17225B

Celeron

G1820TE

DDR3 4GB

SATA 2TB

DVD Super

Multi Drive

Windows 7 Professional SP1

32bit Japanese

VPC-1600-57225B

Core i5 4570TE

VPC-1600-57725B

SATA 2TB

Hardware

Mirroring

VPC-1600-57231B SATA 2TB

Windows 10 IoT Enterprise

2016 LTSB 64bit

JPN/ENU/CHS/KOR

1. Before Using the Product

2

VPC-1600 User’s Manual

Features

Equipped with a low power consumption CPU

The VPC-1600 series uses an Intel® embedded-style, low power consumption CPU.

Intel(R) Q87 Chipset is adopted

Employing an embedded-style chipset, the VPC-1500 series has achieved a long-term stable supply.

It Corresponds to mirroring (RAID1)

Mirroring that matches the given application enables the construction of redundant systems.

[Software RAID], [Hardware RAID]

Supports high-speed high-capacity memory

The VPC-1600 series supports DDR3 SDRAM DIMM modules (4GB to 16GB in total) designed for

high-speed transfer speed, flexibly addressing memory-consuming applications such as image

processing.

1. Before Using the Product

VPC-1600 User’s Manual

3

Commodity model

*HDD 250GB Discontinued

Supported OS

-

Windows 7 Professional SP1 32bit Japanese

-

Windows 7 Professional SP1 64bit Japanese

-

Windows 7 Ultimate SP1 32bit Japanese/English/Chinese

-

Windows 7 Ultimate SP1 64bit Japanese/English/Chinese/Korean

-

Windows Embedded 8.1 Industry Pro 64bit Japanese

-

Windows 10 IoT Enterprise 2016 LTSB 64bit Japanese/English/Chinese/Korean

VPC-1600 Model rules

・Model Name

VPC-1600

・

Type Name

B S

C2

B 2 0 0 1 0 0 0 W 0 0 0

(1)

(2)

(3)

(4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15)

(1)

Chassis (8) Optical system

B

: Black 1

:

DVD Super- multi d rive

(2) Power supply

(9) Operating system

S

: Standard specification

0 : None

3 : Windows 7 Professional for Embedded System (JPN) 32bit

(3) CPU 4

: Windows 7 Professional for Embedded System (JPN) 64bit

C2

:

Celeron G1820TE （2.2GHz） 5 : Windows Embedded 8.1Industry Pro (JPN) 64bit

E1

: Core i5 4570TE (2.7GHz) E

: Windows 7 Ultimate for Embedded System (JPN/ENU/CHS) 32bit

F : Windows 10 IoT Enterprise 2015 LTSB (JPN/ENU/CHS/KOR) 64bit

G :

Windows 7 Ultimate for Embedded System (JPN/ENU/CHS/KOR) 64bit

(4) Memory H : Windows 10 IoT Enterprise 2016 LTSB (JPN/ENU/CHS/KOR) 64bit

B

: DDR3 4GB(4GB×1)

C :

DDR3 8GB(4GB×2) (10) Keyboard

D : DDR3 16GB(4GB×4) 0 : None

1 :

Japanese 109 Keyboard (USB add PS/2 Conversion connector)

(5)

Hard disk(SATA1)

A : English 104 Keyboard (USB add PS/2 Conversion connector)

0 :

None

2

: 250GB 3.5 inch HDD(SATA) (11)

Mouse

C : 2TB 3.5 inch HDD(SATA) 0 : None

1 :

Mouse (USB add PS/2 Conversion connector)

(6)

Hard disk(SATA2)

0 : None (12) Stand

2 : 250GB 3.5inch HDD(SATA) 0 : None

C : 2TB 3.5inch HDD(SATA) W : Ho rizo ntal insta llatio n b ra ck et

T : Vertical stand

(7) RAID(Mirroring) S : Horizontal installation bracket & Vertical stand

0 :

None

R : Software RAID (13) COM4 mounting option

H : Hardware RAID 0 : None

1 :

Including

(14) Reserve

(15)

Onsite Maintenance Service

0 : None

2 : Onsite maintenance service of two years

3 : Onsite maintenance service of three years

1. Before Using the Product

4

VPC-1600 User’s Manual

Customer Support

CONTEC provides the following support services for you to use CONTEC products more efficiently

and comfortably.

Web Site

https://www.contec.com/

Latest product information

CONTEC provides up-to-date information on products.

CONTEC also provides product manuals and various technical documents in the PDF.

Free download

You can download updated driver software and differential files as well as sample programs available

in several languages.

Note! For product information

Contact your retailer if you have any technical question about a CONTEC product or need its price,

delivery time, or estimate information.

How to Obtain Service

For replacement or repair, return the device freight prepaid, with a copy of the original invoice. Please

obtain a Return Merchandise Authorization number (RMA) from the CONTEC group office where

you purchased before returning any product.

* No product will be accepted by CONTEC group without the RMA number.

Liability

The obligation of the warrantor is solely to repair or replace the product. In no event will the

warrantor be liable for any incidental or consequential damages due to such defect or consequences

that arise from inexperienced usage, misuse, or malfunction of this device.

1. Before Using the Product

VPC-1600 User’s Manual

5

Safety Precautions

Understand the following definitions and precautions to use the product safely.

Safety Information

This document provides safety information using the following symbols to prevent accidents resulting

in injury or death and the destruction of equipment and resources. Understand the meanings of these

labels to operate the equipment safely.

DANGER indicates an imminently hazardous situation which, if not avoided, will

result in death or serious injury.

WARNING indicates a potentially hazardous situation which, if not avoided, could

result in death or serious injury.

CAUTION indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury or in property damage.

Handling Precautions

-

Be sure to check that power is not being supplied before connecting or disconnecting the power

cable.

-

Do not modify this product.

-

Be sure to turn the power off before removing or inserting the boards and cables.

-

This product is not designed for use in applications that require a high level of reliability such as

equipment used in aviation, space travel, nuclear power, or medical care. Do not use this product

in these types of applications.

-

Before using this product in applications related to safety such as devices used in trains, vehicles,

disaster prevention, or crime prevention, contact your retailer.

-

Do not replace the battery with an inappropriate one, as doing so may lead to explosions.

-

If the battery needs to be replaced, the product will have to be repaired. In this situation, contact

your retailer.

-

When disposing of used batteries, do so properly as instructed by the local government. For

instructions on how to remove the battery, see the appendix.

DANGER

WARNING

C

AUTION

CAUTION

1. Before Using the Product

6

VPC-1600 User’s Manual

-

Do not use or store the product in a location exposed to extremely high or low temperature or

susceptible to rapid temperature changes.

Example -Exposure to direct sun -In the vicinity of a heat source

-

Do not use the product in extremely humid or dusty locations. It is extremely dangerous to use the

product with its interior penetrated by water or any other fluid or conductive dust. If the product

must be used in such an environment, install it on a dust-proof control panel, for example.

-

Avoid using or storing the device in locations subject to shock or vibration.

-

Do not use the product in the vicinity of devices that generate strong magnetic force or noise.

Such devices will cause this device to malfunction.

-

Do not use or store the product in the presence of chemicals.

-

To clean, wipe it gently with a soft cloth dampened with either water or mild detergent.Do not use

chemicals or a volatile solvent, such as benzene or thinner, to prevent pealing, discoloration of the

paint, or deterioration of resin.

-

Under no circumstances does CONTEC guarantee the recorded contents of the product's storage

device.

-

Continuously operating the product may decrease the service life of the hard disk drive, so use

standby mode.As continuous operation of the equipment may shorten the life of the hard disk

drive, use it in stand-by mode.

-

Be sure to unplug the power cable from a wall outlet before plugging or unplugging a extension

board or any connector.

-

In order to prevent file corruption, be sure to shut down the OS before turning off the product.

-

CONTEC reserves the right to refuse to service a product modified by the user.

-

In the event of failure or abnormality (foul smells or excessive heat generation), unplug the power

cord immediately and contact your retailer.

-

Use grounded and shielded cables to connect to periphery devices.

-

Use an AC cable suitable for your supply voltage and outlet/plug. (The supplied cable is for 125V

AC.

-

Do not use a UPS (uninterruptible power supply) with square-wave output, as connecting it may

damage the system.

-

Component Life:

(1) Power………..During continuous operation at 40°C, the assumed life is about four years

(vertical installation). However, it may be shortened due to operating

temperature (high temperatures).

(2)Battery…………The internal calendar clock and CMOS RAM are backed by a Lithium

primary battery. The backup time at a temperature of 25

°

C with the power

disconnected is 7 years or more.

* Replacement of expendables is handled as a repair (there will be a charge).

* Note that the service lives of the expendables are reference values and are not guaranteed.

-

As for the product with a D-SUB connector, the appropriate tightening torque for the cable

connector is less than 2 kgf

・

cm.

-

According to this product's specifications, the product may be rebooted from the BIOS screen

when the device boots, but this has no effect on the operations after the OS boots.

CAUTION

1. Before Using the Product

VPC-1600 User’s Manual

7

FCC PART15 Class A Notice

NOTE

This equipment has been tested and found to comply with the limits a Class A digital device,

pursuant to part 15 of the FCC Reles. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of the this equipment in a residential area is likely to cause harmful

interference at his own expense.

WARNING TO USER

Any changes or modifications not expressly approved by the party responsible for compliance

could result in the user's authority to operate the equipment.

1. Before Using the Product

8

VPC-1600 User’s Manual

2. System reference

VPC-1600 User’s Manual

9

2.

System reference

Specification

Table 2.1 Functional specification

Item

Specification

CPU *1

Core i5 4570TE ----- 2.7GHz

Celeron G1820TE -- 2.2GHz

Chipset

Intel(R) Q87

BIOS ROM

AMI BIOS

Memory *1

4GB(4GBx1), 8GB(4GMBx2) DDR3 SDRAM (Non-ECC)

Hard disk drive

- SATAIII 3.5” HDD 2TB (Software/Hardware *2) RAID

- SATAIII 3.5” HDD 2TB x1 or x2

Optical drive

DVD super multi drive

Max. reading speed DVD-ROM x8, CD-ROM x24

Max. writing speed DVD+/-R x8, DVD+/-R-DL x8, DVD-RW x6,

DVD+R x8, DVD-RAM x5,

CD-R x24, CD-RW x24

Display

Both analog and digital DVI-I 29pin, DisplayPort 20pin

USB

USB2.0 compliant front 2port, Rear 2 port, USB3.0 compliant Rear 4port

PS/2

2port (Keyboard/Mouse)

Audio

Realtek ALC892-GR, Line Out, Line In, Mic In

Serial

RS-232C : 3 or 4 port(SERIAL PORTA, B,C,D) 9pin D-SUB Connector(Male)

Parallel

1port D-SUB 25pin(Female)

LAN port

2port (100BASE-TX/1000BASE-T,RJ-45 )

Digital I/O

Front : LED Output x2 *5 Rear : Output 2 point, Input : 4 point

(Software API support, User Application available)

RAS function

WDT : 1sec~255sec(Resetting operation by end)

Remote reset/Remote power on External input signal

Software RAS function(Fan rotation, temperature, Voltage data reading)

Extended slot

PCI x3 *6 *7 Installation max. : 176.41mm(L) x 106.68mm(H)

OS

Windows 7 Professional SP1 32bit Japanese

Windows 7 Professional SP1 64bit Japanese

Windows 7 Ultimate SP1 32bit Japanese/English/Chinese

Windows 7 Ultimate SP1 64bit Japanese/English/Chinese/Korean

Windows Embedded 8.1 Industry Pro 64bit Japanese

Windows 10 IoT Enterprise 2016 LTSB 64bit Japanese/English/Chinese/Korean

Stand

Vertical stand, Horizontal installation bracket

Physical

dimensions/Weight

115mm(W) x 410mm(D) x 310mm(H) (No protrusions) / About 8kg

Power

250W FlexATX Power (100-240VAC(50/60Hz) Automatic input switch)

*1 Implement and install the options you selected.

*2 With the Hardware RAID configuration, the transfer speed becomes that of SATA II.

*3 Install the options you selected.

*4 Only the weight of the main unit. It weighs about 9.2kg in RAID configuration.

*5 Front LED x 2 are used by option of hardware raid utility.

*6 You can not be used PCI bus extension chassis made by CONTEC.

*7 When the number of COM ports is increased, one of these open slots is used.

2. System reference

10

VPC-1600 User’s Manual

Table 2.2 Ambient specification

Item

Specification

Operating temperature

5 to 40°C

Storage temperature

-20°C to 60°C

Ambient humidity

20 to 80%RH(No condensation)

Floating dust particles

Not to be excessive

Corrosive gases

None

Line-noise

resistance

Line noise

AC line / ±2kV

Signal line / ±1kV (EN61000-4-4Level3,IEC1000-4-4Level3)

Static electricity

resistance

Contact discharge / ±4KV(EN61000-4-2Level2,IEC1000-4-2 Level2)

Atmospheric discharge /±8KV(EN61000-4-2Level3,IEC1000-4-2

Level3)

Vibration

resistance

Sweep resistance

10 to 57Hz / 0.015m(semi-amplitude), 57 to 150Hz / 1.96m/S

2

(0.2G)

40 min each X,Y, and Z directions

(JIS C60068-2-6 compliant, IEC60068-5-6 compliant)

Impact resistance

10G, half-sine shock for 11 ms in X,Y, and Z directions

(JIS C0041 compliant, IEC68-2-27 compliant)

Installation

Class D grounding (previous class 3 grounding), SG-FG/conduction

Certification

VCCI Class A

FCC Class A

CE Marking

EMC Directive Class A

Low Voltage Directive

RoHS Directive

* Do not use under environmental conditions beyond normal specifications. The system may malfunction.

Table 2.3 Option Mirror card specification

Item Specification

Number of connected drivers

2

RAID level

1

Storage capacity

Max. 2TB

Cache memory size

1MB

Host interface

S-ATA interface

Max. data transfer rate : 3Gbps

Drive interface

S-ATA interface

Max. data transfer rate : 3Gbps

Range of power-supply voltage

4.75VDC to 5.25VDC

Current consumption

1.1A to 1.5A

Physical dimensions (L×W)

96mm(L) x 98.2mm(W)

Weight

49g

2. System reference

VPC-1600 User’s Manual

11

Physical dimensions

VPC-1600 (Horizontal putting)

*16mm is the height including the protrucsion for attaching rubber feet.

Figure 2.1 Physical dimensions

410

14.7

310

[mm]

116

115

2. System reference

12

VPC-1600 User’s Manual

VPC-1600 (At installation the wall mount stand)

Figure 2.2 At installation the wall mount stand of VPC-1600

120.5

[mm]

330

346

125180

5

φ9

15

2. System reference

VPC-1600 User’s Manual

13

VPC-1600 (At installation the vertical stand)

Figure 2.3 At installation the vertical stand of VPC-1600

147.2

128.4

φ5

323

[mm]

199.4

147.2

128.4

17.2 165 172

Mounting hole

Page is loading ...

Contec VPC-1600 Owner's manual

Contec VPC-1600 Owner's manual

Related papers

Other documents