RIDGID R87024BN User manual

Brand: RIDGID

Model: R87024BN

Type: User manual

This manual is also suitable for

OPERATOR’S MANUAL

MANUEL D’UTILISATION/ MANUAL DEL OPERADOR

HEATED JACKET

MANTEAU CHAUFFANT

CHAQUETA TÉRMICA

R8702 SERIES

SÉRIE / SERIE

PORTABLE

POWER SOURCE

BLOC D’ALIMENTATION

PORTATIF

FUENTE DE

ALIMENTACIÓN PORTÁTIL

R86074

To register your RIDGID® product, please visit: http://register.RIDGID.com

Pour enregistrer votre produit de RIDGID®, s’il vous plaît la visite: http://register.RIDGID.com

Para registrar su producto de RIDGID®, por favor visita: http://register.RIDGID.com

BATTERIES AND CHARGERS SOLD SEPARATELY / PILES ET CHARGEUR VENDUS SÉPARÉMENT

LAS BATERIAS Y LOS CARGADORES SE VENDEN POR SEPARADO

WARNING:

To reduce the risk of injury, the

user must read and understand the

operator’s manual before using this

product.

 Important Safety Instructions ............. 2

 Symbols ..............................................3

 Operation .........................................4-5

 Cleaning .............................................5

 Illustrations ......................................6-8

 Parts Ordering/Service ........Back page

 Instructions importantes

la sécurité ...........................................2

 Symboles ............................................3

 Utilisation .........................................3-5

 Nettoyage ........................................... 5

 illustrations ......................................6-8

 Commande de

pièces/dépannage ............Page arrière

 Instrucciones de seguridad

importantes .....................................2-3

 Símbolos ............................................3

 Funcionamiento ...............................4-5

 Limpieza .............................................5

 ilustraciones ....................................6-8

 Pedidos de

repuestos/servicio ......... Pág. posterior

AVERTISSEMENT :

Pour réduire les risques de blessures,

l’utilisateur doit lire et veiller à bien

comprendre le manuel d’utilisation

avant d’utiliser ce produit.

ADVERTENCIA:

Para reducir el riesgo de lesiones, el

usuario debe leer y comprender el

manual del operador antes de usar

este producto.

TABLE OF CONTENTS

****************

TABLE DES MATIÈRES

****************

ÍNDICE DE CONTENIDO

****************

SAVE THIS MANUAL FOR

FUTURE REFERENCE

GUARDE ESTE MANUAL

PARA FUTURAS CONSULTAS

CONSERVER CE MANUEL

POUR FUTURE RÉFÉRENCE

2 - English

IMPORTANT SAFETY INSTRUCTIONS

WARNING

Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may

result in electric shock, fire and/or serious injury.



Use heated jacket only with specifically designated

battery packs and chargers as noted in the operator’s

manual for your power source. Use of any other battery

packs or chargers may create a risk of injury and fire.

If inner lining of heated jacket becomes wet,

discontinue use immediately. Allow jacket to dry

completely before wearing. Water entering heated jacket

will increase the risk of electric shock.

Do not allow the heated jacket to be worn by an

infant, child, helpless person, person with poor

blood circulation or any person with a sensitivity to

overheating. Store the jacket out of the reach of children

and pets and do not allow persons unfamiliar with heated

jackets or these instructions to wear.

Some medical conditions, medical devices, or

medications can cause sensitivity to heat. Consult

your medical device manufacturer and/or your physician

to determine if use of this product is appropriate.

Do not allow the heating elements to touch bare

skin. To reduce the risk of injury, always wear a garment

between the heated jacket and bare skin.



Turn off power to the heated jacket immediately if any

discomfort occurs.



Do not wear the heated jacket along with backpacks

or other strapped devices that cross the chest or back.

This could damage the electrical wiring and cause jacket

malfunction, increasing the risk of shock and burns.



Do not attach lapel pins or any other type of decorative

pins to the heated jacket. Doing so may damage the

electrical wiring.



Do not dry clean. Do not use bleach. Cleaning solvents

may damage or lessen the effect of the jacket’s insulated

heating element.



To clean the heated jacket, follow the fabric care

label in the jacket and the instructions in the Cleaning

section of this manual.



Hand wash only following instructions in the Cleaning

section of this manual. Do not wring or twist. Do not

iron.



Plug the heated jacket ONLY into the power jack on a

compatible RIDGID power source. For this jacket, only

the R86074 power source is compatible.



Do not use the heated jacket with any uninterrupted

power supply. Use of an uninterrupted power supply

may create a risk of jacket malfunctions, injury, and fire.



Do not store or leave heated jacket unattended with

power source and battery pack connected.

Disconnect the power source from the connecting

cable and remove the power source and battery pack

from the battery pocket before storing or cleaning the

heated jacket. Such preventive safety measures reduce

the risk of power to the jacket being turned on accidentally.



Periodically inspect the heated jacket for wear or

damage. If holes, damage, or excessive wear is noted,

discontinue use immediately.

Do not place heavy items on top of the heated jacket

or place sharp folds in the jacket during storage. This

could allow the electrical wiring to become pinched, which

could cause damage to the heated jacket.

 For use with RIDGID 18 V battery packs, see tool/

appliance/battery pack/charger correlation supplement

988000-302.

Do not expose the power source to rain or wet

conditions. Water entering the power source will increase

the risk of electric shock.

The power source is not intended for any use other

than charging small (up to 2.1 Amp) USB electronics

and the R8702 series heated jacket. Any other use may

result in risk of fire.

Do not use the power source if it has been dropped

or received a sharp blow. A damaged power source will

increase the risk of fire.

Remove the battery pack from the power source when

not in use.



Save these instructions. Refer to them frequently and

use them to instruct others who may use this product.

If you loan someone this product, loan them these

instructions also.

3 - English

SYMBOLS

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper

interpretation of these symbols will allow you to operate the product better and safer.

SYMBOL NAME DESIGNATION/EXPLANATION

Safety Alert Indicates a potential personal injury hazard.

Read Operator’s Manual

To reduce the risk of injury, user must read and understand operator’s

manual before using this product.

V Volts Voltage

min Minutes Time

Direct Current Type or a characteristic of current

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SYMBOL SIGNAL MEANING

DANGER:

Indicates an imminently hazardous situation, which, if not avoided, will result

in death or serious injury.

WARNING:

Indicates a potentially hazardous situation, which, if not avoided, could result

in death or serious injury.

CAUTION:

Indicates a potentially hazardous situation, which, if not avoided, may result in

minor or moderate injury.

NOTICE:

(Without Safety Alert Symbol) Indicates important information not related to an

injury hazard, such as a situation that may result in property damage.

4 - English

OPERATION

WARNING:

Do not allow familiarity with this product to make

you careless. Remember that a careless fraction of

a second is sufficient to inflict serious injury.

WARNING:

Always remove battery pack and power source from

the heated jacket when not in use. Removing battery

pack and power source will prevent accidental

operation that could cause serious personal injury.

WARNING:

The heated jacket is for use ONLY with the RIDGID

R86074 power source.

INSTALLING/REMOVING POWER SOURCE

See Figure 1, page 6.

To install: insert a battery pack into the power source as

shown. Make sure the latches on the battery pack snap

into place and the battery pack is secured in the power

source before beginning operation.

To remove: depress the latches on the battery pack.

NOTE: Only RIDGID 18 V battery packs are suitable for

use with the

RIDGID R86074 portable power source

USING THE POWER SOURCE WITH A USB

DEVICE

See Figure 2, page 6.

When a battery pack is installed, the USB port on the power

source supplies a 5 Volt DC, up to 2.1 Amp charging site for

your cell phone, MP3 player, or other small (up to 2.1 Amp) USB

device. Simply connect a USB cable (not provided) from your

device to the USB port on the power source to charge.

The power source can be placed on a flat surface during opera-

tion or can be worn using the belt clip provided on the power

source.

Insert a battery pack into the power source.

 Plug the USB cable into the power source and into your USB

device.

 Press the activate button once to charge your USB device.

NOTE: The power source can be used to power the RIDGID

heated jacket and a USB device simultaneously.

If the power source is activated the internal timer will keep the

USB port active for approximately 8 hours. The timer starts

when the activation button is pressed.

When the timer stops, the power source shuts off. The charg-

ing process will stop and the battery pack will enter sleep

mode.

To reactivate the power source, press the activate button.

To deactivate the power source with time still left on the

timer, remove the battery pack.

NOTE: Charging time is dependent upon the level of charge

in the battery pack when it is inserted into the power source.

OPERATING THE HEATED JACKET

See Figures 3-6, pages 6-7.

WARNING:

Do not touch heating elements with bare skin.

Burns can result from improper use.

The heated jacket offers zoned heating in the right chest, left

chest, and back areas. The power button controls all of the ar-

eas you desire to heat. The power source must be connected

and the power button activated for the jacket to function.

 Insertabatterypackontothepowersource.

 Plug the jacket power cable into the DC outlet on the power

source.

 Presstheactivatebuttontoturnonthepowersource.

 Place the power source and battery into the battery pocket

on the jacket and zip pocket closed to secure.

NOTE: Only the RIDGID R86074 portable power source

is suitable for use with the RIDGID R8702 series heated

jacket.

NOTE: If preferred, the power source and battery can

be clipped to the user with the belt clip. Never allow the

power source to hang loosely by the cord.

After power source is activated, the power button on the

inside of the left chest controls all of the heating zones.

 Press and hold the power button on the inside of left up-

per chest until the red light illuminates.

NOTE: Jacket will go through a 5 minute warm-up period

during initial start-up.

 Press and release the power button to cycle through high

(red), medium (yellow), and low (white) settings.

 Press and hold the power button until the power turns

off.

 If the power source is activated the internal timer will keep

the heated jacket active for approximately 8 hours. The timer

starts when the activation button is pressed.

WARNING:

Temperatures high enough to cause burns could

occur regardless of the heat setting. Remove the

jacket immediately and shut off the power if any

discomfort occurs.

5 - English

NOTE: Figures (illustrations) start on page 6

after French and Spanish language sections.

This product has a 90-Day Satisfaction Guarantee Policy, as well as a

One-year Limited Warranty. For Warranty and Policy details, please go to

www.RIDGID.com or call (toll free) 1-866-539-1710.

CLEANING

WARNING:

To reduce the risk of personal injury and damage,

always remove the battery pack and power source

before cleaning the heated jacket. Never immerse

the battery pack or power source in liquid or allow

liquid to flow inside them.

CLEANING THE HEATED JACKET

Do not machine wash, even if your machine has a hand wash

(or equivalent) setting. Do not iron.

Do not dry clean. Dry cleaning chemicals can damage the

internal wiring of the jacket.

To clean the heated jacket:

 Disconnect the jacket from the power source.

 Remove the battery pack and power source from the

battery pocket, if applicable.

NOTE: Do not allow the battery pack or power source

to come into contact with any liquid while cleaning the

jacket.

 Hand wash the jacket using cold water and a mild liquid

soap.

NOTE: Do not use bleach, powdered detergents, harsh

liquid detergents, or fabric softener.

 Hang to dry.

NOTE: Do not wring to remove water and do not machine

dry.

OPERATION

WARNING:

Do not allow the power cable to become pinched.

Pinched cables increase the risk of burns.

NOTE: Remove the battery pack from the power source

when the jacket is not in use.

WARNING:

To reduce the risk of injury, user must read and

understand the operator’s manual for their USB

accessories in addition to this manual. Ensure

compatibility before attaching a USB device to

the power source. Do not use the power source if

a part is damaged or missing.

ROUTING USB CABLE THROUGH JACKET

See Figure 7, page 8.

When using a power source to charge or power a device

while wearing the heated jacket, a convenient set of open-

ings is provided through which you can route the cables.

 Connect the power source to the jacket power cable as

previously described.

 Plug the USB cable (not provided) into the USB port on

the power source.

 Place the power source and battery into the battery

pocket on the jacket.

 Route the USB cable through the opening in the battery

pocket to the inside of the jacket.

 Thread the cable through the channel and opening lead-

ing to the pocket where you wish to carry the device being

powered or charged.

 Plug the USB cable into the device you wish to power

or charge and place the device into the chest pocket to

carry.

NOTE: You can route the jacket power cable through the

opening in the back of the battery pocket before connect-

ing to the power source and battery, allowing you to clip

the power source to your belt during use. Never allow the

power source to hang loosely by the cord.

NOTICE:

In order to avoid potential damages due to

overheating, please use the lower pocket to store

devices while they are being charged or powered.

Page is loading ...

Fig. 7

A - USB cable (not provided) [câble USB (non fourni), cable USB (no suministrado)]

B - Cable leaving battery pocket (sortie du câble de la poche à pile, cable que sale del bolsillo para las baterías)

C - Opening to upper pocket (ouverture au haut de la poche, apertura del bolsillo superior)

D - Opening to front pocket (ouverture au-devant de la poche, apertura del bolsillo delantero)

TO ROUTE USB CABLE TO UPPER POCKET

ACHEMINEMENT DU CÂBLE USB À LA POCHE SUPÉRIEURE

PARA PASAR EL CABLE USB POR EL BOLSILLO SUPERIOR

JACKET SHOWN INSIDE OUT FOR ILLUSTRATION PURPOSES

INTÉRIEUR ET EXTÉRIEUR DU MANTEAU ILLUSTRÉS À DES FINS DÉMONSTRATIVES

LA CHAQUETA SE MUESTRA DE ADENTRO HACIA AFUERA POR MOTIVOS ILUSTRATIVOS

TO ROUTE USB CABLE TO FRONT POCKET

ACHEMINEMENT DU CÂBLE USB À LA POCHE FRONTALE

PARA PASAR EL CABLE USB POR EL BOLSILLO DELANTERO

Page is loading ...

995000929

7-23-19 (REV:02)

OPERATOR’S MANUAL

MANUEL D’UTILISATION

MANUAL DEL OPERADOR

HEATED JACKET

MANTEAU CHAUFFANT / CHAQUETA TÉRMICA

R8702 SERIES / SÉRIE / SERIE

PORTABLE POWER SOURCE

BLOC D’ALIMENTATION PORTATIF / FUENTE DE ALIMENTACIÓN PORTÁTIL

R86074

ONE WORLD TECHNOLOGIES, INC.

P.O. Box 1427

Anderson, SC 29622 USA

1-866-539-1710  www.RIDGID.com

RIDGID is a registered trademark of RIDGID, Inc., used under license.

Customer Service Information:

For parts or service, do not return this product to the store. Contact your nearest

RIDGID® authorized service center. Be sure to provide all relevant information when

you call or visit. For the location of the authorized service center nearest you, please

call 1-866-539-1710 or visit us online at www.RIDGID.com.

MODEL NO. ____________________SERIAL NO._______________________________

Service après-vente :

Pour acheter des pièces ou pour un dépannage, ne pas retourner ce produit au

magasin. Contacter le centre de réparations RIDGID® agréé le plus proche. Veiller à

fournir toutes les informations pertinentes lors de tout appel téléphonique ou visite.

Pour obtenir l’adresse du centre de réparations agréé le plus proche, téléphoner au

1-866-539-1710 ou visiter notre site www.RIDGID.com.

NO. DE MODÈLE _______________ NO. DE SÉRIE _____________________________

Información sobre servicio al consumidor:

Para piezas de repuesto o servicio, no devuelva este producto a la tienda. Comuníquese

con el centro de servicio autorizado de productos RIDGID® de su preferencia.

Asegúrese de proporcionar todos los datos pertinentes al llamar o al presentarse

personalmente. Para obtener información sobre el centro de servicio autorizado más

cercano a usted, le suplicamos llamar al 1-866-539-1710 o visitar nuestro sitio en la

red mundial, en la dirección www.RIDGID.com.

NÚM. DE MODELO _____________ NÚM. DE SERIE ___________________________

RIDGID R87024BN User manual

Brand: RIDGID

Model: R87024BN

Type: User manual

This manual is also suitable for

Download PDF

report

in other languages

français: RIDGID R87024BN Manuel utilisateur
español: RIDGID R87024BN Manual de usuario

RIDGID R87024BN User manual

This manual is also suitable for

RIDGID R87024BN User manual

in other languages

Related papers

Other documents