FD8162FD8162
2MP • Full HD • PIR • Focus Assist
VIVOTEK
2 - User's Manual
Table of Contents
Overview.......................................................................................................................................................4
Read Before Use �������������������������������������������������������������������������������������������������������������������������������������5
Package Contents �����������������������������������������������������������������������������������������������������������������������������������5
Symbols and Statements in this Document ���������������������������������������������������������������������������������������������5
Physical Description ��������������������������������������������������������������������������������������������������������������������������������6
Hardware Installation �������������������������������������������������������������������������������������������������������������������������������7
Network Deployment �����������������������������������������������������������������������������������������������������������������������������10
Software Installation ������������������������������������������������������������������������������������������������������������������������������12
Ready to Use �����������������������������������������������������������������������������������������������������������������������������������������13
Accessing the Network Camera .................................................................................................................16
Using Web Browsers �����������������������������������������������������������������������������������������������������������������������������16
Using RTSP Players ������������������������������������������������������������������������������������������������������������������������������18
Using 3GPP-compatible Mobile Devices �����������������������������������������������������������������������������������������������19
Using VIVOTEK Recording Software ����������������������������������������������������������������������������������������������������20
Main Page ..................................................................................................................................................21
Client Settings ............................................................................................................................................26
Conî‚¿guration ..............................................................................................................................................28
System > General settings ��������������������������������������������������������������������������������������������������������������������29
System > Homepage layout �����������������������������������������������������������������������������������������������������������������31
System > Logs ��������������������������������������������������������������������������������������������������������������������������������������34
System > Parameters ���������������������������������������������������������������������������������������������������������������������������35
System > Maintenance ��������������������������������������������������������������������������������������������������������������������������36
Security > User Account ������������������������������������������������������������������������������������������������������������������������40
Security > HTTPS (Hypertext Transfer Protocol over SSL) ��������������������������������������������������������41
Security > Access List �������������������������������������������������������������������������������������������������������������������������46
Network > General settings �������������������������������������������������������������������������������������������������������������������51
Network > Streaming protocols �����������������������������������������������������������������������������������������������������������59
Network > SNMP (Simple Network Management Protocol)
���������������������������������������������68
Media > Image ������������������������������������������������������������������������������������������������������������������������������������69
Media > Video ���������������������������������������������������������������������������������������������������������������������������������������78
Media > Audio����������������������������������������������������������������������������������������������������������������������������������������82
PTZ > PTZ settings ������������������������������������������������������������������������������������������������������������������������������83
Event > Event settings ��������������������������������������������������������������������������������������������������������������������������86
Applications > Motion detection�������������������������������������������������������������������������������������������������������������99
Applications > DI and DO ������������������������������������������������������������������������������������������������������������������102
Applications > Tampering detection ����������������������������������������������������������������������������������������������������102
Recording > Recording settings ���������������������������������������������������������������������������������������������������������103
Local storage > SD card management ������������������������������������������������������������������������������������������������108
Local storage > Content management ������������������������������������������������������������������������������������������������109
Appendix .................................................................................................................................................. 111
URL Commands for the Network Camera ������������������������������������������������������������������������������������������� 111
VIVOTEK
User's Manual - 3
Technical Specications ������������������������������������������������������������������������������������������������������������������������������������� 179
Technology License Notice ��������������������������������������������������������������������������������������������������������������������������������� 180
Electromagnetic Compatibility (EMC) ����������������������������������������������������������������������������������������������������������������� 181
VIVOTEK
4 - User's Manual
Overview
VIVOTEK FD8162 is an easy-to-use fixed dome network camera, featuring 2-Megapixel
or 1080p Full HD resolution with superb image quality up to 30 fps� As a true day/night
camera, the FD8162 features a removable IR-cut filter, maintaining clear images 24 hours
a day� With WDR enhancement, users can identify image details in extremely bright or
dark environments� It is especially suitable for monitoring wide open indoor environments
such as building entrances, airports or applications requiring accurate identification�
With high-performance H�264/MPEG-4/MJPEG compression technology, the FD8162
offers extra-smooth HD video quality� For installers, properly adjusting the focus of a
megapixel network camera can be difficult due to the image detail� To resolve this, the
FD8162 is equipped with a focus assist button to allow users to precisely adjust the camera
focus� Furthermore, the unique design of the one-step mount facilitates easy usage of the
FD8162, offering more flexible, hassle-free installation and maintenance�
Together with a PIR sensor for thermal detection, 802�3af compliant PoE, tamper detection,
Micro SD/SDHC card for on-board storage, video cropping and e-PTZ functionality, the
FD8162 is indisputably the top choice for reliable and high performance surveillance�
VIVOTEK
User's Manual - 5
Read Before Use
The use of surveillance devices may be prohibited by law in your country� The Network Camera is not
only a high-performance web-ready camera but can also be part of a exible surveillance system. It is
the user’s responsibility to ensure that the operation of such devices is legal before installing this unit for
its intended use�
It is important to î‚¿rst verify that all contents received are complete according to the Package Contents
listed below� Take note of the warnings in the Quick Installation Guide before the Network Camera is
installed; then carefully read and follow the instructions in the Installation chapter to avoid damage due to
faulty assembly and installation� This also ensures the product is used properly as intended�
The Network Camera is a network device and its use should be straightforward for those who have basic
networking knowledge� It is designed for various applications including video sharing, general security/
surveillance, etc� The Configuration chapter suggests ways to best utilize the Network Camera and
ensure proper operations� For creative and professional developers, the URL Commands of the Network
Camera section serves as a helpful reference to customizing existing homepages or integrating with the
current web server�
Package Contents
â–  FD8162 - the Network Camera
â–  Alignment Sticker
â–  T10 Torx screwdriver / Screws / Plastic anchors
â–  DC Power Cable
â–  Quick Installation Guide / Warranty Card
â–  Software CD
Symbols and Statements in this Document
i
INFORMATION: provides important messages or advices that might help prevent inconvenient
or problem situations�
NOTE: Notices provide guidance or advices that are related to the functional integrity of the
machine�
Tips: Tips are useful information that helps enhance or facilitae an installation, function, or
process�
WARNING! or IMPORTANT!: These statements indicate situations that can be dangerous or
hazardous to the machine or you�
Electrical Hazard: This statement appears when high voltage electrical hazards might occur
to an operator�
VIVOTEK
6 - User's Manual
Physical Description
General I/O Terminal Block
This Network Camera provides a general I/O terminal block which is used to connect external
input / output devices. The pin deî‚¿nitions are described below.
Pin Name
1 DC 12V-
2 DC 12V+
3 AC 24V_2
4 AC 24V_1
5 DI- (GND)
6 DI+
7 DO-
8 DO+ (+12V)
87654321
123 74 5 86
Ethernet
Micro SD Card
Audio InAV Out
Reset
Int.
NTSC
PAL
Ext.
Camera Front View
Camera Rear View
Light Sensor
Lens
Built-in
Microphone
PIR Sensor
Black Cover
IR LEDs
(18 units, effective up
to 15m)
Reserved
(18 units, effective up
(18 units, effective up
(18 units, effective up
to 15m)
(18 units, effective up
to 15m)
Focus Assist
Button
General IO Terminal
Block
Audio In
Audio/Video Out
Jumpers
Microphone
Video Output
internal
external
NTSC
60Hz
PAL
50Hz
internal
external
PAL
1 2
Audio In
Audio/Video Out
Audio/Video Out
Audio/Video Out
Reset
NTSC
Reset
NTSC
Reset Button
Micro SD/SDHC
Card Slot
Reset
NTSC
Reset Button
Reset
Int.
NTSC
Reset Button
Reset Button
Int.
10/100BaseT
Ethernet
Audio In
10/100BaseT
10/100BaseT
VIVOTEK
User's Manual - 7
Hardware Installation
Use the included T10 Torx screwdriver to loosen screws on the sides of dome cover to remove it� You
should then jot down the MAC address printed on the bottom of the camera�
Remove the black cover as shown below so that you can î‚¿ne-tune the focus and zoom the
camera later when the cabling is done�
50
50
5m
41
41
5m
Before installing your camera, make
sure the built-in PIR (Passive Infrared
Sensor) can be directed toward the
area of interest, where possible
intrusion may occur� (The sensitivity
of PIR sensor depends on the object
size and temperature differences
between the object and the background
environment�)
Dome Cover
Dome Cover
Bottom of the Camera
Tilt Adjustment
Screw
Focus Ctrl
Zoom Ctrl
Top View
Side View
VIVOTEK
8 - User's Manual
DI/DO Diagram
Please refer to the following illustration for the connection method�
Hardware Reset
The reset button is used to reset the system or restore the factory default settings� Sometimes
resetting the system can return the camera to normal operation� If the system problems remain
after reset, press the reset button longer to restore the factory settings and install again�
Reset: Press and release the recessed reset button with a straightened paper clip� Wait for the
Network Camera to reboot�
Restore: Press and hold the recessed reset button for at least several seconds to restore� Note
that all settings will be restored to factory defaults�
SD/SDHC Card Capacity
This network camera is compliant with Micro SD/SDHC 32GB and other preceding standard SD
cards�
12V
+12V
Digital output
PIN 1
Power+12V
PIN 2
Digital input
PIN 3
Ground
PIN 4
12 3 74 5 86
Ethernet
Micro SD Card
Audio InAV Out
Reset
Int.
NTSC
PAL
Ext.
Reset Button
VIVOTEK
User's Manual - 9
1� Attach the alignment sticker to the ceilling/wall�
2� Through the two circles on the sticker, drill two pilot holes into the ceilling/wall�
3� The Network Camera can be mounted with the cable routed through the ceiling/wall or
from the side� If you want to feed the cable through the ceiling/wall, drill a cable hole A as
shown in the above picture�
4� Hammer the supplied plastic anchors into the holes�
5� Align the two holes on each side of the camera base with the two plastic anchors on the
ceilling/wall, insert the supplied screws to corresponding holes and secure them with a
screwdriver�
Wall Mount
Ceiling Mount
VIVOTEK
10 - User's Manual
Network Deployment
Setting up the Network Camera over the Internet
There are several ways to set up the Network Camera over the Internet� The rst way is to set
up the Network Camera behind a router� The second way is to utilize a static IP� The third way is
to use PPPoE�
Internet connection via a router
Before enabling the access to the Network Camera over the Internet, make sure you have a
router and follow the steps below�
1� Connect your Network Camera behind a router, the Internet environment is illustrated below�
Regarding how to obtain your IP address, please refer to Software Installation on page 12 for
details�
2� In this case, if the Local Area Network (LAN) IP address of your Network Camera is
192�168�0�3, please forward the following ports for the Network Camera on the router�
â–  Secondary HTTP port
â–  RTSP port
â–  RTP port for audio
â–  RTCP port for audio
â–  RTP port for video
â–  RTCP port for video
If you have changed the port numbers on the Network page, please open the ports accordingly
on your router� For information on how to forward ports on the router, please refer to your
router’s user’s manual�
3� Find out the public IP address of your router provided by your ISP (Internet Service Provider)�
Use the public IP and the secondary HTTP port to access the Network Camera from the
Internet� Please refer to Network Type on page 51 for details�
IP address : 192.168.0.3
Subnet mask : 255.255.255.0
Default router : 192.168.0.1
IP address : 192.168.0.2
Subnet mask : 255.255.255.0
Default router : 192.168.0.1
LAN (Local Area Network)
Router IP address : 192.168.0.1
WAN (Wide Area Network )
Router IP address : from ISP
Cable or DSL Modem
L
A
N (
Local Area Network)
R
o
u
t
e
r
I
P
a
d
d
r
e
s
s
:
W
A
N (Wide Area Network )
R
o
u
t
e
r
I
P
a
d
d
r
e
s
s
:
f
r
o
m
I
S
P
P
POWER
COLLISION
LINK
RECEIVE
PARTITION
1
2
3
4
5
Internet
VIVOTEK
User's Manual - 11
Internet connection with static IP
Choose this connection type if you are required to use a static IP for the Network Camera�
Please refer to LAN conî‚¿guration on page 51 for details.
Internet connection via PPPoE (Point-to-Point over Ethernet)
Choose this connection type if you are connected to the Internet via a DSL Line� Please refer to
PPPoE on page 49 for details�
Set up the Network Camera through Power over Ethernet (PoE)
When using a PoE-enabled switch
The Network Camera is PoE-compliant, allowing transmission of power and data via a single
Ethernet cable� Follow the below illustration to connect the Network Camera to a PoE-enabled
switch via Ethernet cable�
When using a non-PoE switch
If your switch/router does not support PoE, use a PoE power injector (optional) to connect
between the Network Camera and a non-PoE switch�
Power + Data Transmission
Non-PoE Switch
PoE Power Injector
(optional)
POW
ER
C
O
LL
I
S
ION
L
I
N
K
RE
CEIVE
PARTITIO
N
1
2
3
4
5
POW
ER
C
O
LL
I
S
ION
L
I
N
K
RE
CEIVE
PARTITIO
N
1
2
3
4
5
PoE Switch
VIVOTEK
12 - User's Manual
Software Installation
Installation Wizard 2 (IW2), free-bundled software included on the product CD, helps you set up
your Network Camera on the LAN�
1� Install IW2 under the Software Utility directory from the software CD�
Double click the IW2 shortcut on your desktop to launch the program�
2� The program will conduct an analysis of your network environment�
After your network environment is analyzed, please click Next to continue the program�
3� The program will search for all VIVOTEK network devices on the same LAN�
4� After a brief search, the main installer window will pop up� Double-click on the MAC address
that matches the one printed on the camera label or the S/N number on the package box label
Installation
Wizard 2
IW
2
General Connection (without PoE)
POW
ER
C
O
LL
I
S
ION
L
I
N
K
RE
CEIVE
PARTITIO
N
1
2
3
4
5
1� If you have external DI devices, make the connection from general I/O terminal block�
2� Ethernet, power, and other cables are user-supplied� Use a Category 5 Cross Cable when
Network Camera is directly connected to PC�
3� Connect either the DC or AC pins from the terminal block to a power outlet�
Ethernet
Switch
Pin1 & 2 DC 12V
Black
Red
Pin3 & 4 AC 24V
VIVOTEK
User's Manual - 13
to open a browser management session with the Network Camera�
Internet Explorer�
Ready to Use
1� A browser session with the Network Camera should prompt as shown below�
2� You should be able to see live video from your camera� You may also install the 32-channel
recording software from the software CD in a deployment consisting of multiple cameras� For
its installation details, please refer to its related documents�
0002D107258A
0002D107258A
00-02-D1-07-25-8A 192.168.5.151 FD8162
VIVOTEK
14 - User's Manual
Based on the live image retrieved from the camera, adjust the camera lens to the desired view
angle:
1� Turn the lens module left and right�
2� Loosen the tilt adjustment screws on both sides of the camera and then turn the lens module
up and down� Upon completion, tighten the screws�
3� Turn the lens to adjust the image orientation�
1
3
2
Pan 350°
Rotate 350°
Tilt 65°
3-axis Mechanism Design
IMPORTANT! DO NOT over-tighten the controller
bars� Doing so will damage the camera lens module�
W
T
8
N
To adjust the zoom factor and focus range
1� Loosen the zoom controller and then adjust zoom factor by moving the controller left and
right� Upon completion, tighten the zoom controller screw�
2� Loosen the focus controller and then adjust focus range by moving the controller left and
right� Upon completion, tighten the focus controller screw�
VIVOTEK
User's Manual - 15
1� Align the notches on the inner side of the black cover with the rivets on the sides of the lens,
and then î‚¿x the black cover.
2� If you choose to feed the cable through the ceiling/wall, arrange the cables neatly through
the cable hole A (not shown in the drawing)� If you choose to feed the cable from the side, re-
move plate B�
3� Attach the dome cover to the camera as the direction shown below� Tighten two screws from
the sides of the dome cover�
4� Finally, make sure all parts of the camera are securely installed�
1
B
3
2
A
IMPORTANT! Be ware of
the cable route!
Black Cover
Dome Cover
Dome Cover
1� When mounting the camera, you can use the key hole slot at the bottom� The key hole slot
helps facilitate installation and a safe mounting� First fasten a pioneer screw to the wall/
ceiling� Mount the camera to the screw�
2� Use a pencil to mark the locations of the 3 permanent mounting holes�
3� When cabling and the initial adjustment is done, mount the camera by fastening screws to the
3 mounting holes�
Mounting Holes
Key Hole Slot
Pioneer Screw
VIVOTEK
16 - User's Manual
Accessing the Network Camera
This chapter explains how to access the Network Camera through web browsers, RTSP players,
3GPP-compatible mobile devices, and VIVOTEK recording software�
Using Web Browsers
Use Installation Wizard 2 (IW2) to access to the Network Cameras on the LAN�
If your network environment is not a LAN, follow these steps to access the Netwotk Camera:
1� Launch your web browser (ex� Microsoft
®
Internet Explorer, Mozilla Firefox, or Netscape)�
2. Enter the IP address of the Network Camera in the address eld. Press Enter�
3� The live video will be displayed in your web browser�
4. If it is the î‚¿rst time installing the VIVOTEK network camera, an information bar will prompt as
shown below� Follow the instructions to install the required plug-in on your computer�
NOTE:
For Mozilla Firefox or Netscape users, your browser will use Quick Time to stream live
video. If you do not have Quick Time on your computer, please download Quick Time
from Apple Inc's website, and then launch your web browser.
VIVOTEK
User's Manual - 17
To enable the ActiveX
®
Controls for your browser:
1� Choose Tools > Internet Options > Security > Custom Level�
2� Look for Download signed ActiveX
®
controls; select Enable or Prompt� Click OK�
NOTE:
1. By default, your Network Camera is not password-protected. To prevent unauthorized
access, it is highly recommended to conî‚¿gure a password for your camera later.
For
more information about how to enable password protection, please refer to Security
on page 40
.
2. If you see a dialogue box indicating that your security settings prohibit running
ActiveX Controls®, please enable ActiveX Controls for your browser.
VIVOTEK
18 - User's Manual
3� Refresh your web browser, then install the ActiveX
®
control� Follow the instructions to
complete installation�
Using RTSP Players
To view the H�264/MPEG-4 streaming media using RTSP players, you can use one of the
following players that support RTSP streaming�
Quick Time Player
Real Player
As most ISPs and players only allow RTSP streaming through port number 554, please set the
RTSP port to 554� For more information, please refer to RTSP Streaming on page 60�
For example:
4. The live video will be displayed in your player. For more information on how to conî‚¿gure the
RTSP access name, please refer to RTSP Streaming on page 59 for details�
1� Launch the RTSP player�
2� Choose File > Open URL� A URL dialog box will prompt�
3� The address format is rtsp://<ip address>:<rtsp port>/<RTSP streaming access name for
stream1 or stream2>
rtsp://192.168.5.151:554/live.sdp
Video 16:38:01 2011/03/25
VIVOTEK
User's Manual - 19
Using 3GPP-compatible Mobile Devices
To view the streaming media through 3GPP-compatible mobile devices, make sure the Network
Camera can be accessed over the Internet� For more information on how to set up the Network
Camera over the Internet, please refer to Setup the Network Camera over the Internet on page
10�
To utilize this feature, please check the following settings on your Network Camera:
1� Because most players on 3GPP mobile phones do not support RTSP authentication, make
sure the authentication mode of RTSP streaming is set to disable�
For more information, please refer to RTSP Streaming on page 60�
2� As the the bandwidth on 3G networks is limited, you will not be able to use a large video size�
Please set the video and audio streaming parameters as listed below�
For more information, please refer to Stream settings on page 78�
Video Mode MPEG-4
Frame size 176 x 144
Maximum frame rate 5 fps
Intra frame period 1S
Video quality (Constant bit rate) 40kbps
Audio type (GSM-AMR) 12.2kbps
3� As most ISPs and players only allow RTSP streaming through port number 554, please set
the RTSP port to 554� For more information, please refer to RTSP Streaming on page 60�
4� Launch the player on the 3GPP-compatible mobile devices (e�g�, Real Player)�
5. Type the following URL commands in the URL î‚¿eld.
The address format is rtsp://<public ip address of your camera>:<rtsp port>/<RTSP streaming
access name for stream 3>�
For example:
rtsp://192.168.5.151:554/live.sdp
VIVOTEK
20 - User's Manual
Using VIVOTEK Recording Software
The product software CD also contains recording software, allowing simultaneous monitoring
and video recording for multiple Network Cameras� Please install the recording software; then
launch the program to add the Network Camera to the Channel list� For detailed information
about how to use the recording software, please refer to the user’s manual of the software or
download it from http://www�vivotek�com�
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI