MSI 760GM-E51 (FX) User manual



785GM-E51 (FX)/

760GM-E51 (FX)

seres

MS-7596 (v1.x) Manboard

G52-75961XH



Preface

▍

MS-7596

Preface

▍

MS-7596

Copyrght Notce

The materal n ths document s the ntellectual property of MICRO-STAR

INTERNATIONAL. We take every care n the preparaton of ths document, but no

guarantee s gven as to the correctness of ts contents. Our products are under contnual

mprovement and we reserve the rght to make changes wthout notce.

Trademarks

All trademarks n ths manual are propertes of ther respectve owners.

MSI

®

s regstered trademark of Mcro-Star Int’l Co.,Ltd.

NVIDIA

®

s regstered trademark of NVIDIA Corporaton.

ATI

®

s regstered trademark of AMD Corporaton.

AMD

®

s regstered trademarks of AMD Corporaton.

Intel

®

s regstered trademarks of Intel Corporaton.

Wndows

®

s regstered trademarks of Mcrosoft Corporaton.

AMI

®

s regstered trademark of Amercan Megatrends Inc.

Award

®

s a regstered trademark of Phoenx Technologes Ltd.

Sound Blaster

®

s regstered trademark of Creatve Technology Ltd.

Realtek

®

s regstered trademark of Realtek Semconductor Corporaton.

JMcron

®

s regstered trademark of JMcron Technology Corporaton.

Netware

®

s a regstered trademark of Novell, Inc.

Lucd

®

s trademarks of LucdLogx Technologes, Ltd.

VIA

®

s regstered trademark of VIA Technologes, Inc.

ASMeda

®

s regstered trademark of ASMeda Technology Inc.

Pad, Phone, and Pod are trademarks of Apple Inc.

Revson Hstory

Revson Revson Hstory Date

V1.6 For AM3+ CPU 2011/05

Techncal Support

If a problem arses wth your system and no soluton can be obtaned from the user’s

manual, please contact your place of purchase or local dstrbutor. Alternatvely, please

try the followng help resources for further gudance.

Vst the MSI webste for techncal gude, BIOS updates, drver updates, and

other nformaton:

http://www.ms.com/servce/download

Contact our techncal sta at:

http://support.ms.com

￭

◙

Preface

▍

MS-7596



Preface

▍

MS-7596

Safety Instructons

Always read the safety nstructons carefully.

Keep ths User’s Manual for future reference.

Keep ths equpment away from humdty.

Lay ths equpment on a relable at surface before settng t up.

The openngs on the enclosure are for ar convecton hence protects the equpment

from overheatng. DO NOT COVER THE OPENINGS.

Make sure the voltage of the power source s at 110/220V before connectng the

equpment to the power nlet.

Place the power cord such a way that people can not step on t. Do not place

anythng over the power cord.

Always Unplug the Power Cord before nsertng any add-on card or module.

All cautons and warnngs on the equpment should be noted.

Never pour any lqud nto the openng that can cause damage or cause electrcal

shock.

If any of the followng stuatons arses, get the equpment checked by servce

personnel:

The power cord or plug s damaged.

Lqud has penetrated nto the equpment.

The equpment has been exposed to mosture.

The equpment does not work well or you can not get t work accordng to User’s

Manual.

The equpment has been dropped and damaged.

The equpment has obvous sgn of breakage.

DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT ABOVE 60

o

C (140

o

F),

IT MAY DAMAGE THE EQUIPMENT.

CAUTION: There s a rsk of exploson, f battery s ncorrectly replaced.

Replace only wth the same or equvalent type recommended by the manufacturer.

警告使用者:

這是甲類資訊產品，在居住的環境中使用時，可能會造成無線電干擾，在這種情況下，

使用者會被要求採取某些適當的對策。

廢電池請回收

For better envronmental protecton, waste batteres should be

collected separately for recyclng specal dsposal.

￭

◯

v

Preface

▍

MS-7596

Preface

▍

MS-7596

FCC-B Rado Frequency Interference Statement

Ths equpment has been tested and found

to comply wth the lmts for a Class B dg-

tal devce, pursuant to Part 15 of the FCC

Rules. These lmts are desgned to provde

reasonable protecton aganst harmful nter-

ference n a resdental nstallaton. Ths equpment generates, uses and can radate

rado frequency energy and, f not nstalled and used n accordance wth the nstruc-

tons, may cause harmful nterference to rado communcatons. However, there s no

guarantee that nterference wll not occur n a partcular nstallaton. If ths equpment

does cause harmful nterference to rado or televson recepton, whch can be deter-

mned by turnng the equpment o and on, the user s encouraged to try to correct the

nterference by one or more of the measures lsted below.

Reorent or relocate the recevng antenna.

Increase the separaton between the equpment and recever.

Connect the equpment nto an outlet on a crcut derent from that to whch the

recever s connected.

Consult the dealer or an experenced rado/televson techncan for help.

Notce 1

The changes or modcatons not expressly approved by the party responsble for com

-

plance could vod the user’s authorty to operate the equpment.

Notce 2

Shelded nterface cables and A.C. power cord, f any, must be used n order to comply

wth the emsson lmts.

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.

◯

Ths devce comples wth Part 15 of the FCC Rules. Operaton s subject to the follow

-

ng two condtons:

ths devce may not cause harmful nterference, and

ths devce must accept any nterference receved, ncludng nterference that may

cause undesred operaton.

1)

2)

Mcro-Star Internatonal

MS-7596

Preface

▍

MS-7596

v

Preface

▍

MS-7596

WEEE (Waste Electrcal and Electronc Equpment) Statement

ENGLISH

To protect the global envronment and as an envronmentalst, MSI must

remnd you that...

Under the European Unon (“EU”) Drectve on Waste Electrcal and Electronc

Equpment, Drectve 2002/96/EC, whch takes eect on August 13, 2005,

products of “electrcal and electronc equpment” cannot be dscarded as

muncpal wastes anymore, and manufacturers of covered electronc equpment wll be

oblgated to take back such products at the end of ther useful lfe. MSI wll comply wth

the product take back requrements at the end of lfe of MSI-branded products that are

sold nto the EU. You can return these products to local collecton ponts.

DEUTSCH

Hnwes von MSI zur Erhaltung und Schutz unserer Umwelt

Gemäß der Rchtlne 2002/96/EG über Elektro- und Elektronk-Altgeräte dürfen Elek

-

tro- und Elektronk-Altgeräte ncht mehr als kommunale Abfälle entsorgt werden. MSI

hat europawet verschedene Sammel- und Recyclngunternehmen beauftragt, de n

de Europäsche Unon n Verkehr gebrachten Produkte, am Ende senes Lebenszyklus

zurückzunehmen. Btte entsorgen Se deses Produkt zum gegebenen Zetpunkt aus-

schlesslch an ener lokalen Altgerätesammelstelle n Ihrer Nähe.

FRANÇAIS

En tant qu’écologste et an de protéger l’envronnement, MSI tent à rappeler cec...

Au sujet de la drectve européenne (EU) relatve aux déchets des équpement élec

-

trques et électronques, drectve 2002/96/EC, prenant eet le 13 août 2005, que les

produts électrques et électronques ne peuvent être déposés dans les décharges ou

tout smplement ms à la poubelle. Les fabrcants de ces équpements seront oblgés de

récupérer certans produts en n de ve. MSI prendra en compte cette exgence relatve

au retour des produts en n de ve au sen de la communauté européenne. Par con-

séquent vous pouvez retourner localement ces matérels dans les ponts de collecte.

РУССКИЙ

Компания MSI предпринимает активные действия по защите окружающей среды,

поэтому напоминаем вам, что....

В соответствии с директивой Европейского Союза (ЕС) по предотвращению

загрязнения окружающей среды использованным электрическим и электронным

оборудованием (директива WEEE 2002/96/EC), вступающей в силу 13

августа 2005 года, изделия, относящиеся к электрическому и электронному

оборудованию, не могут рассматриваться как бытовой мусор, поэтому

производители вышеперечисленного электронного оборудования обязаны

принимать его для переработки по окончании срока службы. MSI обязуется

соблюдать требования по приему продукции, проданной под маркой MSI на

территории EC, в переработку по окончании срока службы. Вы можете вернуть

эти изделия в специализированные пункты приема.

Page is loading ...

1-1-1

Thank you for choosng the

785GM-E51 (FX)/ 760GM-

E51 (FX) Seres (MS-7596 v1.X) Mcro ATX man-

board. The 785GM-E51 (FX)/ 760GM-E51 (FX) Seres

manboards are based on AMD

®

785G/ 760G & SB710

chpsets for optmal system ecency. Desgned to t

the advanced AMD

®

processors n AM3+ package, the

785GM-E51 (FX)/ 760GM-E51 (FX) Seres delver a

hgh performance and professonal desktop platform so-

luton.

Chapter 1

Gettng Started

1-2

Gettng Started

▍

MS-7596

Gettng Started

▍

MS-7596

Mainboard SpecificationS

Processor Support

AMD

®

64 bts Phenom

TM

II processor n AM3+ package.

(For the latest nformaton about CPU, please vst

http://www.ms.com/servce/cpu-support)

HyperTransport

HyperTransport™ 3.0, supports up to 2.6 GHz

Chpset

North Brdge: AMD

®

785G/ 760G chpset

South Brdge: AMD

®

SB710 chpset

Integrated Graphc

Integrated ATI Radeon

TM

HD4200 GPU (for AMD

®

785G chpset)

Integrated ATI Radeon

TM

HD3000 GPU (for AMD

®

760G chpset)

Share Memory: Max up to 512MB

Memory Support

DDR3 1333/ 1066/ 800 SDRAM (total 16 GB Max)

4 DDR3 DIMMs (240-pn/ 1.5V)

(For more nformaton on compatble components, please vst

http://www.ms.com/servce/test-report)

LAN

Supports PCIE LAN 10/100/1000 Fast Ethernet by Realtek

®

RTL8111DL

Audo

Chp ntegrated by Realtek

®

ALC888S/ ALC889

Flexble 8-channel audo wth jack sensng

Complant wth Azala 1.0 Spec

IDE

1 IDE port by AMD

®

SB710

Supports Ultra DMA 66/100/133 mode

Supports PIO, Bus Master operaton mode

SATA

5 SATAII ports by AMD

®

SB710

1 eSATA port by AMD

®

SB710

Supports storage and data transfers at up to 3 Gb/s

RAID

SATA1~5 supports RAID 0/ 1/ 0+1 or JBOD mode by AMD

®

SB710

■

Gettng Started

▍

MS-7596

1-3

Gettng Started

▍

MS-7596

Floppy

1 oppy port

Supports 1 FDD wth 360 KB, 720 KB, 1.2 MB, 1.44 MB and 2.88 MB

Connectors

Back panel

1 PS/2 keyboard or mouse port

1 VGA port

1 DVI-D port

6 USB 2.0 ports

1 HDMI port

1 eSATA port

1 LAN port

6 exble audo ports

On-Board

3 USB 2.0 connectors

1 Chasss Intruson connector

1 Seral port connector

1 Parallel port connector

1 CD-In connector

1 Front Panel Audo connector

1 SPDIF-out connector

1 TPM Module connector

1 Overclock FSB swtch

Slots

1 PCI Express Gen2 x16 slot

1 PCI Express x1 slot

2 PCI slots, support 3.3V/ 5V PCI bus Interface

Form Factor

Mcro-ATX (24.4 cm X 24.4 cm)

Mountng

8 mountng holes

If you need to purchase accessores and request the part numbers, you could search

the product web page and nd detals on our web address below

http://www.ms.com/ndex.php

■

-

■

-

■

1-4

Gettng Started

▍

MS-7596

Gettng Started

▍

MS-7596

785GM-E51 (FX)/ 760GM-E51 (FX) Seres

(MS-7596 v1.X) Manboard

Mainboard Layout

Gettng Started

▍

MS-7596

1-5

Gettng Started

▍

MS-7596

MSI manboard

MSI Drver/Utlty DVD

SATA Cable (Optonal)

Power Cable

USB Bracket (Optonal)

Standard Cable for

IDE Devces

Back IO Sheld

User’s Gude

packing checkLiSt

* The pctures are for reference only and may vary from the packng contents of the

product you purchased. If you need to purchase accessores and request the part num-

bers, you could search the product web page and nd detals on our web address

http://www.ms.com/ndex.php

Page is loading ...

2-2-1

Ths chapter provdes you wth the nformaton about

hardware setup procedures. Whle dong the nstalla

-

ton, be careful n holdng the components and follow the

nstallaton procedures. For some components, f you

nstall n the wrong orentaton, the components wll not

work properly.

Use a grounded wrst strap before handlng computer

components. Statc electrcty may damage the compo

-

nents.

Chapter 2

Hardware Setup

2-2

Hardware Setup

▍

MS-7596

Hardware Setup

▍

MS-7596

JPWR2, p.2-8

Quick coMponentS guide

Back Panel,

p.2-9

CPU, p.2-3

CPUFAN, p.2-13

DDR3, p.2-6

JCOM1, p.2-16

JCI1, p.2-12

JLPT1, p.2-16

FDD1, p.2-11

JPWR1, p.2-8

IDE1, p.2-11

JTPM1, p.2-17

SATA, p.2-12

SYSFAN, p.2-13

JFP1, p.2-14JUSB1~3, p.2-15

JBAT1, p.2-18

JSP1, p.2-14

JCD1, p.2-13

PCI, p.2-22

PCIE, p.2-20

OCSWITCH1,

p.2-19

JAUD1, p.2-15

Hardware Setup

▍

MS-7596

2-3

Hardware Setup

▍

MS-7596

cpu (centraL proceSSing unit)

When you are nstallng the CPU, make sure to nstall the cooler to prevent overheatng.

If you do not have the CPU cooler, consult your dealer before turnng on the computer.

For the latest nformaton about CPU, please vst

http://www.ms.com/servce/cpu-support

Important

Overheatng

Overheatng wll serously damage the CPU and system. Always make sure the coolng

fan can work properly to protect the CPU from overheatng. Make sure that you apply

an even layer of thermal paste (or thermal tape) between the CPU and the heatsnk to

enhance heat dsspaton.

Replacng the CPU

Whle replacng the CPU, always turn o the ATX power supply or unplug the power

supply’s power cord from the grounded outlet rst to ensure the safety of CPU.

Overclockng

Ths manboard s desgned to support overclockng. However, please make sure your

components are able to tolerate such abnormal settng, whle dong overclockng. Any

attempt to operate beyond product speccatons s not recommended. We do not guar

-

antee the damages or rsks caused by nadequate operaton or beyond product spec-

catons.

Gold arrow

Introducton to AM3+ CPU

The surface of CPU. Remember to apply some thermal paste on t for better heat

dsperson.

2-4

Hardware Setup

▍

MS-7596

Hardware Setup

▍

MS-7596

CPU & Cooler Installaton

When you are nstallng the CPU, make sure the CPU has a cooler attached on the top

to prevent overheatng. Meanwhle, do not forget to apply some thermal paste on CPU

before nstallng the heat snk/cooler fan for better heat dsperson.

Follow the steps below to nstall the CPU & cooler correctly. Wrong nstallaton wll

cause the damage of your CPU & manboard.

Pull the lever sdeways away from

the socket. Make sure to rase the

lever up to a 90-degree angle.

1.

Look for the gold arrow of the CPU.

The gold arrow should pont as shown

n the pcture. The CPU can only t n

the correct orentaton.

2.

If the CPU s correctly nstalled, the

pns should be completely embedded

nto the socket and can not be seen.

Please note that any volaton of the

correct nstallaton procedures may

cause permanent damages to your

manboard.

3. Press the CPU down rmly nto the

socket and close the lever. As the

CPU s lkely to move whle the lever

s beng closed, always close the

lever wth your ngers pressng tghtly

on top of the CPU to make sure the

CPU s properly and completely

embedded nto the socket.

4.

Hardware Setup

▍

MS-7596

2-5

Hardware Setup

▍

MS-7596

Poston the coolng set onto the

retenton mechansm.

Hook one end of the clp to hook

rst.

5. Then press down the other end of the

clp to fasten the coolng set on the

top of the retenton mechansm.

Locate the Fx Lever and lft up t .

6.

Fasten down the lever.7. Attach the CPU Fan cable to the CPU

fan connector on the manboard.

8.

Important

Whle dsconnectng the Safety Hook from the xed bolt, t s necessary to keep an eye

on your ngers, because once the Safety Hook s dsconnected from the xed bolt, the

xed lever wll sprng back nstantly.

2-6

Hardware Setup

▍

MS-7596

Hardware Setup

▍

MS-7596

MeMory

These DIMM slots are used for nstallng memory modules. For more nformaton on

compatble components, please vst

http://www.ms.com/servce/test-report

DDR3

240-pn, 1.5V

48x2=96 pn 72x2=144 pn

Dual-Channel mode Populaton Rule

In Dual-Channel mode, the memory modules can transmt and receve data wth two

data bus lnes smultaneously. Enablng Dual-Channel mode can enhance the system

performance. The followng llustratons explan the populaton rules for Dual-Channel

mode.

1

DIMM1

DIMM2

DIMM3

DIMM4

2

DIMM1

DIMM2

DIMM3

DIMM4

Installed

Empty

Important

DDR3 memory modules are not nterchangeable wth DDR2 and the DDR3 standard

s not backwards compatble. You should always nstall DDR3 memory modules n

the DDR3 DIMM slots.

In Dual-Channel mode, make sure that you nstall memory modules of the

same type

and densty n derent channel DIMM slots.

To enable successful system boot-up, always nsert the memory modules nto the

DIMM1 rst.

Due to the chpset resource deployment, the system densty wll only be detected up

to 15+GB (not full 16GB) when each DIMM s nstalled wth a 4GB memory module.

•

Hardware Setup

▍

MS-7596

2-7

Hardware Setup

▍

MS-7596

Installng Memory Modules

The memory module has only one notch on the center and wll only t n the rght

orentaton.

Insert the memory module vertcally nto the DIMM slot. Then push t n untl the

golden nger on the memory module s deeply nserted n the DIMM slot. The plastc

clp at each sde of the DIMM slot wll automatcally close when the memory module

s properly seated.

Manually check f the memory module has been locked n place by the DIMM slot

clps at the sdes.

Important

You can barely see the golden nger f the memory module s properly nserted n the

DIMM slot.

Notch

Volt

1.

2.

3.

2-8

Hardware Setup

▍

MS-7596

Hardware Setup

▍

MS-7596

power SuppLy

ATX 24-pn Power Connector: JPWR1

Ths connector allows you to connect an ATX 24-pn power supply. To connect the ATX

24-pn power supply, make sure the plug of the power supply s nserted n the proper

orentaton and the pns are algned. Then push down the power supply rmly nto the

connector.

You may use the 20-pn ATX power supply as you lke. If you’d lke to use the 20-pn

ATX power supply, please plug your power supply along wth pn 1 & pn 13.

13.+3.3

V

1.+3.3

V

14.-12V

2.+3.3

V

15.Ground

3

.Ground

16.PS-ON

#

4.+5

V

17.Ground

5

.Ground

18.Ground

6.+5

V

19.Ground

7

.Ground

22.+5

V

10.+12V

20.Res

8.PW

R O

K

23.+5

V

11

.+12V

21.+5

V

9.5VSB

24.Ground

12.+3.3

V

ATX 4-pn Power Connector: JPWR2

Ths connector s used to provde power to the CPU.

4.+12V

2

.Ground

3.+12V

1

.Ground

Important

Make sure that all the connectors are connected to proper ATX power supples to

ensure stable operaton of the manboard.

•

Hardware Setup

▍

MS-7596

2-9

Hardware Setup

▍

MS-7596

back paneL

Mouse/Keyboard

The standard PS/2

®

mouse/keyboard DIN connector s for a PS/2

®

mouse/keyboard.

VGA Port

The DB15-pn female connector s provded for montor.

DVI-D Port

The DVI-D (Dgtal Vsual Interface-Dgtal) connector allows you to connect a LCD

montor. It provdes a hgh-speed dgtal nterconnecton between the computer and

ts dsplay devce. To connect an LCD montor, smply plug your montor cable nto the

DVI-D connector, and make sure that the other end of the cable s properly connected

to your montor (refer to your montor manual for more nformaton.)

USB Port

The USB (Unversal Seral Bus) port s for attachng USB devces such as keyboard,

mouse, or other USB-compatble devces.

HDMI Port

The Hgh-Denton Multmeda Interface (HDMI) s an all-dgtal audo/vdeo nterface

capable of transmttng uncompressed streams. HDMI supports all TV format, nclud

-

ng standard, enhanced, or hgh-denton vdeo, plus mult-channel dgtal audo on a

sngle cable.

eSATA Port

The eSATA (External-SATA) port s for attachng the eSATA hard drve.

▶

Mouse/Keyboard

DVI-D Port

VGA Port

USB Port

LAN

Lne-In

Lne-Out

Mc

RS-Out

CS-Out

SS-Out

USB Port

eSATA Port

USB Port

HDMI Port

2-10

Hardware Setup

▍

MS-7596

Hardware Setup

▍

MS-7596

LAN

The standard RJ-45 LAN jack s for connecton to

the Local Area Network (LAN). You can connect a

network cable to t.

LED Color LED State Condton

Left Yellow O LAN lnk s NOT establshed.

On(Steady state) LAN lnk s establshed.

On(brghter & pulsng) The computer s communcatng wth another computer on the LAN.

Rght

Green O 10 Mbts/sec data rate s selected.

On 100 Mbts/sec data rate s selected.

Orange On 1000 Mbts/sec data rate s selected.

Audo Ports

These audo connectors are used for audo devces. It s easy to derentate between

audo eects accordng to the color of audo jacks.

Lne-In (Blue) - Lne In, s used for external CD player, tape-player or other

audo devces.

Lne-Out (Green) - Lne Out, s a connector for speakers or headphones.

Mc (Pnk) - Mc, s a connector for mcrophones.

RS-Out (Black) - Rear-Surround Out n 4/ 5.1/ 7.1 channel mode.

CS-Out (Orange) - Center/ Subwoofer Out n 5.1/ 7.1 channel mode.

SS-Out (Gray) - Sde-Surround Out 7.1 channel mode.

▶

■

Yellow Green/ Orange

Page is loading ...

MSI 760GM-E51 (FX) User manual

Related papers

Other documents