Insignia NS-GSC101 Quick setup guide

Insignia
Brand
Insignia
Model
NS-GSC101
Category
Game console accessories
Type
Quick setup guide

Insignia NS-GSC101 is a slim fit case for Nintendo's 3DS XL. It features a two-piece design with tab locks to keep your device secure. The case provides access to all buttons and ports on your 3DS XL, so you can keep playing without having to remove it from the case. The slim fit design makes it easy to store your 3DS XL in a carrying case or backpack without adding bulk. The case is made of a durable material that will protect your device from scratches, bumps, and drops, keeping it looking new for longer.

Insignia NS-GSC101 is a slim fit case for Nintendo's 3DS XL. It features a two-piece design with tab locks to keep your device secure. The case provides access to all buttons and ports on your 3DS XL, so you can keep playing without having to remove it from the case. The slim fit design makes it easy to store your 3DS XL in a carrying case or backpack without adding bulk. The case is made of a durable material that will protect your device from scratches, bumps, and drops, keeping it looking new for longer.

READ THIS FIRST
ATTACHING THE SLIM FIT CASE:
STOP
3D
OFF
1 Slide the 3DS XL® system bottom rst into the BOTTOM piece of the Slim Fit Case
and then snap the case onto the 3DS® XL system.
2 Slide the front of the TOP piece of the Slim Fit Case onto the top of the 3DS XL®
system and then snap the case onto the 3DS XL® system.
The charging cradle cannot be used to charge the Nintendo 3DS XL with the product
attached. Please charge by plugging the DC plug of the AC adapter to the AC
adapter connector of the Nintendo 3DS XL. Also, when charging the Nintendo 3DS
XL with the DC plug of the AC adapter plugged into the AC adapter connector,
please do not open the Nintendo 3DS XL to a full 180° as it may damage the system.
CAUTION: Failure to follow these instructions could damage your 3DS XL system.
1 Firmly hold the 3DS XL system and pull the tab locks o.
2 Slide the case o the system as shown.
3 Continue to rmly hold the 3DS XL® system and locate the tab locks on the TOP
piece of the Slim Fit Case. Release the Tab Locks and remove the TOP piece of the
Slim Fit Case as shown.
REMOVING THE SLIM FIT CASE:
Tab locks
Tab locks
ld
damage y
our
3D
oc
ks
o
FI
mag
e y
o
.
V1 ENGLISH/SPANISH 14-0074
3D
OFF
Lengüetas de bloqueo
V1 INGLES/ESPAÑOL14-0074
FAVOR LEA ESTO PRIMERO
AJUSTE DEL ESTUCHE DELGADO:
CUIDADO
1 Primero, deslice el sistema 3D XL® en la parte INFERIOR del estuche delgado y
encaje el estuche en el sistema 3DS® XL.
2 Deslice la parte frontal de la parte SUPERIOR del estuche delgado en la parte
superior del sistema 3D XL® y encaje el estuche en el sistema 3DS® XL.
La base de carga no debe usarse para cargar el Nintendo 3DS XL con el producto
instalado. Favor cargue enchufando el enchufe de CC del adaptador de CA al
conector del adaptador de CA del Nintendo 3DS XL. Cuando esté cargando el
Nintendo 3DS XL con el enchufe de CC del adaptador de CA enchufado en el
conector del adaptador de CA , no abra el Nintendo 3DS XL completamente a 180°,
ya que esto puede dañar el sistema.
CUIDADO: De no seguir estas instrucciones podría dañar su sistema 3DS XL.
1 Mantenga rmemente el sistema 3DS XL
y tire de las lengüetas de bloqueo.
2 Remueva el estuche del sistema tal como se muestra.
3 Siga manteniendo rmemente el sistema 3DS XL® y localice las lengüetas de
bloqueo en la parte SUPERIOR del estuche delgado. Suelte las lengüetas de
bloqueo y remueva la parte SUPERIOR del estuche delgado, tal como se muestra.
DESMONTAJE DEL ESTUCHE DELGADO:
Lengüetas de bloqueo
ñar
su sistema
3DS
XL
D
EL
G
si
ste
ma
3D
  • Page 1 1
  • Page 2 2

Insignia NS-GSC101 Quick setup guide

Insignia
Brand
Insignia
Model
NS-GSC101
Category
Game console accessories
Type
Quick setup guide

Insignia NS-GSC101 is a slim fit case for Nintendo's 3DS XL. It features a two-piece design with tab locks to keep your device secure. The case provides access to all buttons and ports on your 3DS XL, so you can keep playing without having to remove it from the case. The slim fit design makes it easy to store your 3DS XL in a carrying case or backpack without adding bulk. The case is made of a durable material that will protect your device from scratches, bumps, and drops, keeping it looking new for longer.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents