Part Number Update
Bulletin No: PNU-206 Effective Date: January 30, 2015 Cancels: NA Page: 1 of 1
Subject: Bendix Announces New Part Numbers for Bendix
®
TABS-6
™
Standard Controller
for Tank- or Frame-mounted Units
Trailer ABS systems are designated by the number of wheel speed sensors and pressure modulator valves used;
for example, a 2S/1M system uses two wheel speed sensors and one modulator.
Trailer System
Old OE
Part
Number
Old AM
Part
Number
Crack-
Pressure
New
OE Part
Number
Order New
AM Part
Number
New Controller
Crack-Pressure
Two (2) Sensors,
One (1) Modulator
(2S/1M) Axle
Systems Only
5014015 801855
3.0 ± 0.5
psi
K109807 K109808
4.5 ± 0.5 psi
For improved brake balance
performance. Additionally,
Bendix
®
brand air disc brake
applications no longer require
a 3.3 psi crack-pressure
quick-release valve.
Two (2) Sensors,
One (1) Modulator
(2S/1M) Dolly Axle
Systems Only
5014112 801990
3.0 ± 0.5
psi
K109809 K109812
Log-on and Learn from the Best
On-line training that's available when you are 24/7/365.
Visit www.brake-school.com.
©2015 Bendix Commercial Vehicle Systems LLC, a member of the Knorr-Bremse Group • 01/15 • All Rights Reserved.
Bendix
®
TABS-6
™
Standard Controller
(shown without connector cover installed)
Part Number Label
(Includes Wheel Speed
Sensor Harness
Installation Reference)
-
1
