Home Decorators Collection 1338800820 Installation guide

STEP 1

Moore Club Chair Assembly Instructions

STEP 4

Remove Legs and Hardware from the bottom of the Club Chair.

Place the 2 Curved Front Legs into the Front Leg Positions.

Place the 2 Angled Back Legs into the Back Leg Positions.

The Front Legs are interchangeable.

HARDWARE LIST:

INSTRUCTION*1

STEP 2

STEP 3

Tighten each bolt through the washer with the wrench clockwise.

L-SHAPE WRENCH*1

BOLT*8

WASHER*8

FRONT LEG*2

The Back Legs are interchangeable.

Insert the bolt through the washer into each leg and tighten with the

enclosed wrench.

Remove the WHITE protection strip from the Bottom edge of the chair and

place the BLACK cover over the bottom of the Club Chair to complete.

STEP 6

STEP 5

BACK LEG*2

COVER-UP FABRIC*1

This manual is also suitable for

Download PDF