Page is loading ...
STEP 1
1
2
3
4
5
6
7
Moore Club Chair Assembly Instructions
STEP 4
Remove Legs and Hardware from the bottom of the Club Chair.
Place the 2 Curved Front Legs into the Front Leg Positions.
Place the 2 Angled Back Legs into the Back Leg Positions.
The Front Legs are interchangeable.
HARDWARE LIST:
INSTRUCTION*1
STEP 2
STEP 3
Tighten each bolt through the washer with the wrench clockwise.
L-SHAPE WRENCH*1
BOLT*8
WASHER*8
FRONT LEG*2
The Back Legs are interchangeable.
Insert the bolt through the washer into each leg and tighten with the
enclosed wrench.
Remove the WHITE protection strip from the Bottom edge of the chair and
place the BLACK cover over the bottom of the Club Chair to complete.
STEP 6
STEP 5
BACK LEG*2
COVER-UP FABRIC*1
/
