Hampton Bay 14707 Operating instructions

THANK YOU

We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this light fixture. We strive to continually create

quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.

Thank you for choosing Hampton Bay!

Item #1000 511 757

Model #14707

USE AND CARE GUIDE

ESSEX 5-LIGHT CHANDELIER

Questions, problems, missing parts? Before returning to the store,

call Hampton Bay Customer Service

8 a.m. - 6 p.m., EST, Monday-Friday

1-855-HD-HAMPTON

HAMPTONBAY.COM

2

Table of Contents

Table of Contents..........................................................2

Safety Information.........................................................2

Warranty.........................................................................2

Five (5) Year Warranty .............................................................2



What is Covered.......................................................................2



What is Not Covered ................................................................2



Pre-Installation ..............................................................3

Planning Installation ................................................................3



Tools Required.........................................................................3



Hardware Included...................................................................3



Package Contents....................................................................4



Installation ..................................................................... 5

Care and Cleaning ........................................................ 7

Troubleshooting............................................................ 7

Service Parts ................................................................. 8

READ AND SAVE THESE INSTRUCTIONS.

□ For your protection and safety, carefully read and

understand the information provided in this manual

completely before attempting to assemble, install, or

operate this product. Failure to do so could lead to electrical

shock, fire, or other injuries that could be hazardous or even

fatal.

□ Before touching any wire, use a voltage tester to make sure

it is not live.

□ When replacing fuses, turn off the main power first. Make

sure your hands and feet are dry, and place one hand behind

your back to prevent electricity from making a complete

circuit through your chest. Touch a plug fuse only by its

insulated rim. Remove cartridge fuses with a fuse puller.

□ Use tools with insulated handles and ladders made of wood

or fiberglass.

□ To protect children, place a safety cover over any unused

outlets.

Warranty

FIVE (5) YEAR WARRANTY

WHAT IS COVERED

The manufacturer warrants this fixture to be free from defects in materials and workmanship for a period of five (5) years from date of

purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product

is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the

manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alteration,

neglect, or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any

way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of

an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship.

This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal

wear and tear.

WHAT IS NOT COVERED

The manufacturer does not warrant and specifically disclaims any warranty, whether expressed or implied, of fitness for a particular

purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any

consequential or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of

said product.

Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.hamptonbay.com.

Safety Information

DANGER: Before starting installation of this fixture

or removal of a previous fixture, disconnect the power

by turning off the circuit breaker, removing the fuse at

the fuse box, or tripping the breaker that controls that

circuit. Tape a sign to the panel warning others to

leave the circuit alone while you work.

CAUTION: CONSULT A QUALIFIED ELECTRICIAN IF

YOU HAVE ANY ELECTRICAL QUESTIONS. If you have

any non-electrical questions about this fixture, please

call our Customer Service Team at

1-855-HD-HAMPTON or visit www.hamptonbay.com.

Please reference your SKU (1000 511 757) or UPC

(802513147070).

3 HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Pre-Installation

PLANNING INSTALLATION

Read all instructions before installation.

To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard.

IMPORTANT: Inspect the wire insulation for any

cuts, abrasions, or exposed copper that may have

occurred during shipping. If there is a defect in the

wire, do not attempt installation. Please call the

Customer Service Team at 1-855-HD-HAMPTON.

TOOLS REQUIRED

Phillips Wire Pliers

Screwdriver Stripper

Safety Electrical

Goggles Tape

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

AA BB

CC DD EE FF

GG HH II

Part Description Quantity

AA Mounting bracket 1

FF Hex nut 1

BB Outlet box screw 2

GG Wire connector 3

CC Green ground screw 1

HH Lock washer 1

DD Ring 1

II Threaded tube 1

EE Screw collar loop 1

NOTE: You may use five 60W type A bulbs or 13W

SBCFL bulbs (sold separately).

4

Pre-Installation (continued)

PACKAGE CONTENTS

A

B

C

D

E

F

G

H

Part Description Quantity

A Canopy 1

E Decorative part 1

B Chain 1

F Finial 1

C Loop 1

G Socket ring 5

D Fixture body 1

H Glass shade 5

5 HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Installation

1

Preparing for installation

2

Attaching the canopy to the outlet

box

□ Fasten the mounting bracket (AA) onto the outlet box using

two outlet box screws (BB).

□ Screw the threaded tube (II) into the mounting bracket (AA),

and secure it using the lock washer (HH) and hex nut (FF).

NOTE: This threaded tube (II) should extend long

enough to protrude through the canopy when it is

mounted. (Adjust as needed)

□ Place the canopy (A) over the threaded tube (II), and screw the

screw collar loop (EE) onto the threaded tube (II).

□ Secure the canopy (A) using the ring (DD).

3

Assembling the fixture body

4

Attaching the chain

□ Guide the fixture wire with bare copper grounding wire

through the loop (C), and screw the loop (C) onto the nipple

joint on the fixture body (D) securely.

□ Place the decorative part (E) over the lower nipple joint of the

fixture body (D), then secured with the finial (F).

□ Adjust the five arms on the fixture body (D) to make an equal

distance between arms.

NOTE: Do not twist the fixture wire.

□ Adjust the chain (B) to the desired height by spreading apart

the end link of the chain (B). Use a pair of pliers and a

screwdriver. Wrap a soft cloth around the pliers to protect the

chain’s finish.

□ Attach one end of the chain (B) to the screw collar loop (EE)

and the other end to the loop (C).

AA

BB

FF

HH

II

DD

II

A

EE

C

B

EE

6

5

Weaving the fixture wire

□ Unscrew the ring (DD) from the screw collar loop (EE), and

lower the canopy (A) and ring (DD) over the chain (B) on the

fixture.

□ Weave the fixture wires and bare copper ground wire up

through the chain (B), ring (DD), canopy (A), screw collar loop

(EE), threaded tube (II), and then into the outlet box.

6

Making the electrical connections

□ Strip 3/4 in. of insulation from the wire ends, and twist the

stripped ends together with pliers.

□ Connect the glossy/live wire from the fixture to the black

wire from the outlet box, and the rough/neutral wire from the

fixture to the white wire from the outlet box.

□ The bare copper grounding wire from the fixture must loop

one turn under the head of the green ground screw (CC) on

the mounting bracket (AA) before it is connected to the

grounding conductor of the supply circuit.

□ Cover the wires with wire connectors (GG). Tape the wire

connectors (GG) and wires together, and carefully position all

wires inside the outlet box.

NOTE: The glossy/live wire has the text printed on it;

the rough/neutral wire has the ridge on it.

Installation (continued)

A

DD

B

EE

II

GG

7 HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

7

Installing the canopy to the outlet

box

8

Installing the glass shades and light

bulbs

□ Raise the canopy (A) all the way up to the ceiling, and tighten

the ring (DD) onto the screw collar loop (EE) until the canopy

(A) is firmly held against the ceiling.

□ Unscrew the socket rings (G) from the sockets. Set the glass

shades (H) onto each socket, and secure them with the socket

rings (G).

□ Install the light bulbs (not included) into the sockets. Use five

60-watt medium base bulbs.

NOTE: You can also use five 13w maximum SBCFL

bulbs (sold separately). Do not exceed the recommended

wattage.

Care and Cleaning

□ Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or wipe carefully.

□ To clean the fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box, and use a dry or

slightly dampened, clean cloth to wipe the exterior surface of the fixture.

Troubleshooting

Problem Possible Cause Solution

The bulb is burned out. Replace the light bulb.

The power is off. Ensure the power supply is turned on.

There is a faulty switch. Test or replace the switch.

The lights will not turn on.

There is a faulty wire connection. Check the wiring.

The fuse blows, or the circuit breaker

trips, when the light is turned on.

There are crossed wires, or the power

wire is grounding out.

Discontinue use of the lamp. Check the wire connections.

Contact a qualified electrician or call the Customer Care

Service Team at 1-855-HD-HAMPTON.

Installation (continued)

A

DD

B

EE

8

MODEL: 14707

AA BB

CC DD EE FF

GG HH II

A B

C D

E F G

H

Service Parts

Part Description

AA Mounting bracket

A Canopy

BB Outlet box screw

B Chain

CC Green ground screw

C Loop

DD Ring

D Fixture body

EE Screw collar loop

E Decorative part

FF Hex nut

F Finial

GG Wire connector

G Socket ring

HH Lock washer

H Glass shade

II Threaded tube

Questions, problems, missing parts? Before returning to the store,

call Hampton Bay Customer Service

8 a.m. - 6 p.m., EST, Monday-Friday

1-855-HD-HAMPTON

HAMPTONBAY.COM

Retain this manual for future use.

Page is loading ...

Hampton Bay 14707 Operating instructions

Hampton Bay 14707 Operating instructions

in other languages

Related papers

Other documents