Page is loading ...
How To Assemble The 3 Piece Prelit Palm Tree
(Model# 3240-456C)
4. Locate the 2 pc
p
ole and place the
b
ottom section onto
the center peg.
9. Attached the
medium size top
onto the middle
size pole.
5. Attach the nex
t
2 poles on the
remaining 2 pegs
10. Place the
largest top onto
the tallest pole.
3. Locate the
base. Each se
t
of base includes 9
wing nuts.
2. Locate the 3
tree tops.
a. Small
b. Medium
c. Large
1. Locate the 4 pole
sections.
a. Shortest section
b. Middle section
c. Longest section
with consists of 2
p
ieces.
6. Attached the
top section fro
m
the 2 pcs pole se
t
to the botto
m
section.
7. This is the way the
p
oles should loo
k
b
efore continuing the
assembly process.
8. Attached the
smallest top on to
the shortest pole.
9. On the talles
t
p
ole, carefull
y
connect the plugs
from the top pole
to the lower pole.
10. On all 3
p
oles, carefully
connect the
p
lugs from the
p
ole to the tree
top.
11. Wrap base with
b
urlap cloth that is
p
rovided with the tree.
(For Example Only)
12. Shape the tree top
b
y evenly spreading
the green limbs into
an arch from the
center to the oute
r
end of the limb. Then
connect the 3 cord
p
lugs into the outle
t
to light the tree.
13. The palm tree also
comes with 3 yar
d
stakes. These can be
used to secure the
b
ase of the palm trees
for outdoor use.
/
