Yamaha HTR-5940 User manual

Category
Hobs
Type
User manual

This manual is also suitable for

Yamaha HTR-5940 is an AV receiver/amplifier that offers various features for enhancing the audio and video experience in a home theater or entertainment system. It provides numerous connectivity options, including inputs for DVD, DTV/CBL, DVR, and AUX devices, allowing you to connect various audio and video sources. With its high-quality amplifier and advanced processing capabilities, it delivers powerful and immersive surround sound, bringing your movies, music, and games to life.

Yamaha HTR-5940 is an AV receiver/amplifier that offers various features for enhancing the audio and video experience in a home theater or entertainment system. It provides numerous connectivity options, including inputs for DVD, DTV/CBL, DVR, and AUX devices, allowing you to connect various audio and video sources. With its high-quality amplifier and advanced processing capabilities, it delivers powerful and immersive surround sound, bringing your movies, music, and games to life.

SERVICE MANUAL
100998
IMPORTANT NOTICE
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.
WARNING: Failure to follow appropriate service and safety procedures when servicing this product may result in personal
injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons,
we advise all YAMAHA product owners that any service required should be performed by an authorized
YAMAHA Retailer or the appointed service representative.
IMPORTANT: The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and
service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable
and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please
contact the distributor's Service Division.
WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
IMPORTANT: Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
CONTENTS
........................................
PIN CONNECTION DIAGRAM ..............................
P.O.Box 1, Hamamatsu, Japan
AV RECEIVER/AV AMPLIFIER
RX-V459/HTR-5940
2006 All rights reserved.
This manual is copyrighted by YAMAHA and may not be copied or
redistributed either in print or electronically without permission.
'06.02
Turn on the power while pressing these keys.
• Starting DIAG
Press the “STANDBY/ON” key while simultaneously
pressing those two keys of the main unit as indicated in the
figure below.
Starting DIAG in the protection cancel
mode
If the protection function works and causes hindrance to
trouble diagnosis, cancel the protection function as
described below, and it will be possible to enter the DIAG
mode. (The protection functions other than the excess
current detect function will be disabled.)
Press the “STANDBY/ON” key while simultaneously
pressing those two keys indicated in the figure above. At
this time, keep pressing those two keys for 3 seconds or
longer.
In this mode, the “SLEEP” segment of the FL display of the
main unit flashes to indicate that the mode is DIAG mode
with the protection functions disabled.
CAUTION!
Using this product with the protection function disabled
may cause damage to itself. Use special care for this point
when using this mode.
Keys of main unit /
• Canceling DIAG
1Before canceling DIAG, execute setting for FACTORY
PRESET of DIAG menu No.9 (Memory initialization
inhibited or Memory initialized).
* In order to keep the user memory stored, be sure to
select PRESET INHIBITED (Memory initialization
inhibited).
2Turn off the power by pressing the “STANDBY/ON”
key of the main unit.
14
7
1
1
10
20 14
7
1
50
1
26
25
1
10
20
25
48
1
24
SN74LV157APWR
SN74LVU04APWR
SN74LV245APWR TRAN TC4013BP FF
TC74VHCU04FT INVER
W9816G6CH-7 SDRAM YAC520-EE2
S29AL004D70TF1020
Diodes
Anode
Cathode
+
~
~
Anode
Cathode ~
+
~
Anode
Cathode
1N4002S
1SS133,176
1SS270A
1SS355
1SS380
1T2
MTZJ13A 13V
MTZJ15A 15V
MTZJ15B 15V
MTZJ2.4B 2.4V
MTZJ27B 27V
MTZJ30A 30V
MTZJ5.1C 5.1V
D2SBA20 1.5A 200V
D5SB20 5A 200V
MA8030-L 2.9V
MA8051-M 5.1V
MA8056-M 5.6V
MA8068-L 6.6V
MA8068-M 6.8V
MA8075-H 7.7V
MA8091-M 9.1V
MA8100-M 10V
MA8082-H 8.5V
S1NB20 1A 200V
S1NB60 1.0A 600V
RB441Q-40 T-77
RB441Q-40 T-77
RB500V-40
RB501V-40
UDZ 3.6BTE-17 3.6V
UDZ5.1B 5.1V
Transistors
BCE
ECB
2SA1015 Y
2SA933S Q,R
2SA949 O,Y
2SC1740S QRS
2SC1815 Y
2SC1890A D,E
2SC2229 O,Y
2SC2240 GR,BL
2SA1037K Q,R,S
2SC2412K Q,R,S
DTA114ES
DTC114EKA
DTC114ES
DTC124EKA
DTC144ES
2SB1257
2SB1274 Q,R,S
2SA1708 S,T
2SA1770 S,T
2SC4488 S,T
2SC4614 S,T
2SD1938F S,T
2SA1695 O,P,Y
2SC4468 O,P,Y
2SD1915F S,T
2SD2014
2SK2158-T2B-A
2SK246 Y
2SK3288
2SK3850
B
E
C
ECB
BCE
2SC3326 A,B
2SC3837K T146 N,P
2SC3906K T146 R,S
2
ABCDEFGH I J
1
3
4
5
7
6
DVD
CVBS
Y
CY
CY
CY
DVD
DTV/CBL
DVR
DTV/CBL
V-AUX
DVR
DVD
Y
Pb/Cb
Pr/Cr
Y
YCb Cr
Pb/Cb
Pr/Cr
L1/L2/L3
RX-V459,
DSP-AX459,
HTR-5940
models
L1/L2/L3
OUT
L1/L2/L3
L1/L2/L3
L1/L2/L3 L1/L2/L3
IN
Y/ Cb/ Cr
IN
COMP0
COMP1
/CBYPASS
BYPASS
Y
Pb/Cb
Pr/Cr
Y
Pb/Cb
Pr/Cr
J model
U, C, R, T, K, A, G, E, L models
J model
J model
J model
DTV/
CBL
DVR
CVBS
/MON
/MON
/CNON
/VR1
OUTPUT AMP
LA73050
IC401
OUTPUT AMP
NJM2581
IC290
Y
YCb Cr
YCb Cr
YCb Cr
Cb
Cr
CVBS
Y
C
CVBS
Y
C
Y
C
15
14
12 3
IC402
1
5
15
14
12 3
IC403
VIC
VIB
VIA
DVR OUT
MONITOR OUT
INPUT SELECTOR
BYPASS
74HC4051
Input Selector
74HC4052
IC287(Cb, Y)
IC288(Cr, L1)
IC289(L3, L2)
6dB
6dB
6dB
6dB
6dB
6dB
6dB
6dB
6dB
1
3
8
6
33
29
31
24
20
22
12
17
15
3, 13
3, 13
2, 4, 5, 15, 14, 11
2, 4, 5, 15, 14, 11
5
C
15
14
12 3
IC404
1
5
U, C, R, T, K, A, G, E, L models
U, C, R, T, K, A, G, E, L models
U, C, R, T, K, A, G, E, L models
RX-V459,
DSP-AX459,
HTR-5940
models
RX-V459,
DSP-AX459,
HTR-5940 models
OPERATION
See page 73
SCHEMATIC DIAGRAM
FUNCTION
See page 72
SCHEMATIC DIAGRAM
VIDEO BLOCK DIAGRAM
ABCDE FGH I J
1
2
3
4
5
6
7
OPERATION
See page 73
SCHEMATIC DIAGRAM
DSP
POWER
TRANSFORMER
See page 69-71
SCHEMATIC DIAGRAM
DSP
See page 69-71
SCHEMATIC DIAGRAM
MAIN
See page 74
SCHEMATIC DIAGRAM
+B
G
-B
+BL
G
-BL
-VP
FL2
+12
FL1
G
-12
+5A
E
+5D
+5V
+3.3V
IC54
+3.3V
IC306
-5V
IC103
+5.5V
IC1
D1046
C1109 C1087
D1036
F3000/J3002
TE300
D3018
D3016
Q3007
RY301Q3003
C1088 C1082
D1035
C1083
C1100
D1041, 1402, 1044, 1045
C1101 C1105C1107
C1104
D133
C1106
+5.3V
U, C models
IC100
XMPWR
+5V
IC106
+1.2V
IC53
+12V
IC104
-30V
RY105
RY105
/4ohms
Q1068
-12V
IC105
IC51
+5V
IC102
G
-5V
+5V
VE
+5S
G
D1 Q1
D2
D3
s10T3000
F3001
IC300, 302, 303
Power Detector
/Reset
Q3006, 3002
Microprocessor
M30627
IC2
XL1
16MHz
RY301
POWER SAVEPOWER RELAY
+5M
+5BU
+5.3X
XGND
+3.3V
+1.2V
DG
+3.3D
SELECTOR/VOLUME
VIDEO SELECTOR
TUNER
RDS
XM
Net-module
DSP
XMPWR
/4ohms
POWER SAVE
MUTE CONTROL
SPEAKER RELAY
POWER RELAY
LIMITER CONTROL
MODEL DETECT
DEST. DETECT
THM
PLDET
PRD
PRV1
PRV2
/HP
POWER DETECT
PRI
/RESET
6
17
53
96
99
120
121
122
123
124
128
3/ 69/ 114
/117/ 119
55
98
63/ 64
58/ 59
60/ 62
FL DRIVER
IC301
FL DISPLAY
V3000
IR REMOTE
U3000
VOLUME
SW300
INPUT SELECTOR
SW301
TONE CONTROL/ DSP PROGRAM
Tack SW
SW302
MAIN POWER SW
SW323
SW302, 304, 306, 309- 319, 321, 322, 324
3/ 4/ 5/ 57
97
18 20
125/ 126
51/ 50/ 49/ 48/ 46
100- 104
54
47
7
8-10/ 15/ 16/ 23/ 24/ 26- 31
12/ 42- 45
34/ 35
69/ 84/ 86/ 88/ 89/ 117
83/ 90- 95
25/ 65- 68, 70- 74, 76- 81
115/ 116/ 111- 117
CONTROL/POWER BLOCK DIAGRAM
A
1
2
3
4
5
6
7
8
9
10
BCDEFGH I JKLMN
All voltages are measured with a 10M/V DC electronic volt meter.
Components having special characteristics are marked s and must be replaced
with parts having specifications equal to those originally installed.
Schematic diagram is subject to change without notice.
DSP 2/3
DIGITAL IN
ANALOG IN
PL/PR
FL/FR
SBL/SBR
C/SW
SL/SR
0.1
5.0
0
4.0
0
4.9
0.3
0
4.9
0.3
0
4.9
2.4 2.4 0.6
5.0
0
04.90
04.90
0.1
0
0
0.3
0
3.3
0.3
0.6
0
3.3
0
4.0
3.3
3.3
3.3
0
0
3.3
1.6
1.5
1.7
3.3
0
0
3.1
1.3
1.3 3.1
0
3.1
0
3.3 5.0
3.3 5.0
0
0
3.3
0
1.7
0
3.3
1.7
0
1.7
0
0
3.3
0
3.3
0
5.0
3.2
0.1
3.1
0.9
3.3
0.6
5.0
0.9
3.5
5.0
3.3
5.0
3.3
5.0
3.3
5.0
3.3
0.50
5.00
0
0.1
3.1
3.2
0
0.1
0.1
0.1
0.1
0
3.3
3.3
0
0.5
0.1
5.0
0
5.0
5.0
5.0
3.3
3.3
00
0
0
1.7
0.1
0
0
0
0
1.2
1.7
3.3
0
1.7
0
3.3
0
1.2
1.7
0
3.3
1.2
0
0
0
1.2
0
3.3
3.3
3.3
0
3.3
3.3
1.2
3.3
3.3
0
0
0
0
0
3.3
3.3
1.2
3.3
0
3.3
0
3.3
0
3.3
0.4
3.3
0.1
1.2
0.1
0.1
0
3.0
1.6
1.2
1.8
0
3.3
2.8
2.9
0
1.2
0.1
0.1
0.1
3.3
3.3
3.3
2.9
0
0.1
3.3
0.1
1.2
0.1
0.2
0
0.2
3.3
0.1
0.2
1.2
0
0.1
0.1
1.2
0.2
0.2
0.1
3.3
0
0.2
0.2
1.2
0.2
2.9
3.3
0
1.7
3.3
0
1.7
0
1.7
1.7
0
1.7
0
0
3.3
0
0
0
1.2
0.1
1.3
0
1.2
3.1
0.9
3.3
0
1.2
3.3
3.3
0.4
0
1.7
1.7
1.7
0
0.5
3.3
3.3
3.3
0
3.3
0.2
0.1
0
0.2
0.2
3.3
0.2
0
0.1
0.1
0.1
3.3
2.9
3.3
3.3
3.3
0
3.3
0.4
0.1
0.1
0.1
3.0
3.3
0
0.1
0.1
0
0.2
0.2
3.3
0.1
0
0.2
0.2
0.2
3.3
2.9
1.7
3.3
0.1
0.1
2.9
2.8
1.8
1.6
0
0.1
0
0
0.1
0.4
0.1
0.1
2.9
3.3
3.3
0
0
2.8
1.8
1.6
3.0
0.1
0.1
0.1
0
3.3
0
0.1
0.1
0.1
0.1
0.1
0.2
0.2
0.2
3.3
0.1
0.2
0.2
0.2
0.2
0.1
0.2
0.2
3.3
0
3.3
3.3
A-2
00
0
5.4 0.1
0.1
0
0
0
0
0.2
0.2
0.2
0.2
1.8
1.8
1.8
0
0
0
3.5
3.5
3.3
3.5
1.5
1.5
1.5
1.5
0
0
0
3.5
3.5
3.5
3.5
3.5
3.5
3.5
0
0
0
0
0
1.9
1.8
0.2
A-1
DSP
XMDT
DIR
BUFFER
16M SDRAM 4M ROM
SELECTOR
S29AL004D70TF1020
No replacement part available.
IC54 : NJM2885DL1-33
Low dropout voltage regulator
Thermal
Protection
Bandgap
Reference
V
OUT
V
IN
GND
13
2
4B13
4A12
4Y11
3B10
3A9
3Y8
1B 2
1Y 3
2A 4
2B 5
2Y 6
GND 7
IC63 : SN74AHCT08PWR
Quadruple 2-input positive-AND gates
Vcc141A 1
Y4
B2
GND 3
IC61, 62 : SN74AHCT1G32DCKR
Single 2-input positive-OR gate
Vcc5A1
IC64 : W9816G6CH -7
512K x 2 banks x 16 bits SDRAM
CLOCK
BUFFER
ADDRESS
BUFFER
CLK 35
18
CKE 34
A10 20
CS
17RAS
16CAS
15WE
21A0
24A3
27A4
32A9
19BA
2 DQ0
3 DQ1
5 DQ2
6 DQ3
8 DQ4
9 DQ5
11 DQ6
12 DQ7
39 DQ8
40 DQ9
42 DQ10
43 DQ11
45 DQ12
46 DQ13
48 DQ14
49 DQ15
14 LDQM
36 UDQM
COMMAND
DECODER
REFRESH
COUNTER
REFRESH
COUNTER
DQ
BUFFER
COLUMN
COUNTER
MODE
REGISTER
CONTROL
SIGNAL
GENERATOR
CELL ARRAY
BANK #0
R
O
W
D
E
C
O
D
E
R
COLUMN DECODER
SENSE AMPLIFIER
CELL ARRAY
BANK #1
R
O
W
D
E
C
O
D
E
R
COLUMN DECODER
SENSE AMPLIFIER
IC52 : SN74LVU04APWR
Hex inverters
1A
1Y
2Y
VCC
6A
1
2
3
411
2A 6Y
5A
12
13
14
3A
3Y
5Y
4A
5
6
74Y
8
9
10
GND
1
DIR
A1
A2
A3
A4
A5
A6
A7
A8
GND
Vcc
OE
B1
B2
B3
B4
B5
B6
B7
B8
2
3
4
5
6
7
8
9
10
20
19
18
17
16
15
14
13
12
11
IC65 : SN74LV245APWR
Octal bus transceiver with 3-state outputs
Input
Selector
RXOUT
RX0
RX1
RX2
RX3
RX4
RX5/VI
RX6/UI
LPF
TMCK/PIO0
TBCK/PIO1
TLRCK/PIO2
TDATA/PIO3
TXO/PIOEN
Cbit, Ubit Microcontroller
I/F
Data
Selector
Clock
Selector
Modulation
&
Parallel Port
PLL
XIN XOUT XMCK CKST
SLRCK
SBCK
RLRCK
RBCK
RMCK
SDIN
RDATA
RERR
DO
XMODECICECLINTAUDIO/VOEMPHA/UO
1/N
Demodulation
&
Lock detect
1
2
3
4
5
8
9
10
13
44
45
46
47
48
29 28 27 34
23
22
20
17
16
24
21
36
37
41383948353332
IC56 : LC89057W-VF4A-E
Digital audio interface transceiver
IC53 : R1172S121D-E2-F
Power supply
VDD
CE
Vref
Current Limit
VOUT
GND
2
3
5
6
11
10
14
13
15
1
G
A/B
4B
4A
3B
3A
2B
2A
1B
1A
4
7
9
12
1Y
2Y
3Y
4Y
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
A/B
1A
1B
1Y
2A
2B
2Y
GND
VCC
G
4A
4B
4Y
3A
3B
3Y
IC58 : SN74LV157APWR
Quadruple 2-line to 1-line data selectors/multiplexers
Y4
B2
GND 3
IC59 : SN74AHC1G08DCKR
2-input positive-AND gate
Vcc5A1
POINT A-2 Pin 29 of IC56POINT A-1 Pin 28 of IC55
IC66 : S29AL004D70TF1020
4M-bit COMS 3.0 volt-only boot sector flash memory
A1
A15
NC
A14
A13
A12
A11
A10
A9
A8
NC
NC
WE#
RESET#
NC
NC
RY/BY#
A17
A7
A6
A5
A4
A3
A2
1
16
2
3
4
5
6
7
8
17
18
19
20
21
22
23
24
9
10
11
12
13
14
15
A16
DQ2
BYTE#
VSS
DQ15/A-1
DQ7
DQ14
DQ6
DQ13
DQ9
DQ1
DQ8
DQ0
OE#
VSS
CE#
A0
DQ5
DQ12
DQ4
VCC
DQ11
DQ3
DQ10
48
33
47
46
45
44
43
42
41
40
39
38
37
36
35
34
25
32
31
30
29
28
27
26
In put / Out put
Buff ers
X- De cod er
Y-Decoder
Chip Enab le
Out put Enable
Logi c
Erase V olt ag e
Generat or
PGM Vo ltage
Generator
Tim er
V
CC
De te ctor
State
Contr ol
Comm and
Register
V
CC
V
SS
WE#
BYTE#
CE#
OE#
STB
STB
DQ0DQ15 (A- 1)
Sect or Sw itc hes
RY/ BY#
RESET#
Data
Lat ch
Y- Gating
Cell M atrix
Addr ess La t ch
A0A17
100/16
100/16
100/16
&6
XM
A
1
2
3
4
5
6
7
8
9
10
BCDEFGH I JKLMN
All voltages are measured with a 10M/V DC electronic volt meter.
Components having special characteristics are marked s and must be replaced
with parts having specifications equal to those originally installed.
Schematic diagram is subject to change without notice.
DSP 3/3
ANALOG IN
FRONT L
DIGITAL IN
C/SW
SBL/SBR
FRONT L
SL/SR
FL/FR
SURROUND
BACK L
SURROUND L
SUB
WOOFER
CENTER
1.7
1.3
0
3.3
1.7
3.3
3.3
0
0
0
1.7
0
0
3.3
0
5.0
2.5
2.5
2.5
2.5
5.0
3.3
3.1
1.7
1.7
1.7
1.7
0
5.0
1.7
2.5
2.5
2.6
0
5.1
2.5
2.5
2.5
2.5
0
1.7
0
0.5
5.1
2.5
8.8 5.1
8.8
0
5.1
00
00
3.3
0.1
0.1
0
1.7
0
0
3.3
0
1.7
1.7
1.7
1.7
1.7
1.7
5.02.5 0 0 2.5
5.02.5
2.5
0
11.8
0
0
0
-11.9
0
0
011.8
0
0
0
-11.9
0
0
011.8
0
0
0
-11.9
0
0
011.8
0
0
0
-11.9
0
0
011.8
0
0
0
-11.9
0
0
to MAIN (2)_W1004
Page 74 J7
to FUNCTION (1)_CB202
Page 72 D2
DSP
SELECTOR
8ch DAC
2ch DAC
IC71-74, 75, 76 : NJM4565M
Dual operational amplifier
8
2, 6
3, 5
1, 7
4
V+
INPUT
+INPUT
V
OUTPUT
IC51 : NJM78M05DL1A
Voltage regulator
INPUT
OUTPUT
COMMON
2
3
5
6
11
10
14
13
15
1
G
A/B
4B
4A
3B
3A
2B
2A
1B
1A
4
7
9
12
1Y
2Y
3Y
4Y
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
A/B
1A
1B
1Y
2A
2B
2Y
GND
VCC
G
4A
4B
4Y
3A
3B
3Y
IC67 : SN74LV157APWR
Quadruple 2-line to 1-line data selectors/multiplexers
IC68 : PCM1680DBQR
Audio digital-to-analog converter
IC70 : PCM1803DBR
Stereo A/D converter
IC69 : PCM1781DBQR
Audio digital-to-analog converter
(1) Open-drainoutputforthePCM1782
NOTE: Signal names in parentheses ( ) areforthe PCM1781.
Po wer Supp ly
Enhanced
Multilevel
Delta-Sigma
Modulator
VOUTL
4/8
Oversampling
Digital
Filter
With
Function
Control
Audio
Serial
Port
BCK
LRCK
DATA
Serial
Control
Port
Zero Detect
(TEST)
SCK System
Clock
Manager
MC (DEMP1)
MS (DEMP0)
Outp ut Amp
and
Low-Pass Filter
MD (MUTE)
DAC
VCOM
Syst em Clock
AGND
VCC
ZEROR/ZEROA (1)
(ZEROA)
ZEROL/NA (1)
Outp ut Amp
and
Low-Pass Filter
DAC
VOUTR
(FMT)
BCK
VINL
Reference
VREF1
VREF2
VINR
Delta-Sigma
Modulator
Delta-Sigma
Modulator
x1/64, x1/128
Decimation
Filter
With
High-Pass Filter
Power Supply
AGNDVCC VDD
DGND
Clock and Timing Control
Serial
Interface
Mode/
Format
Control
LRCK
DOUT
FMT0
FMT1
MODE0
MODE1
BYPAS
OSR
PDWN
SCKI
TEST
Outp ut A mp and
Low-P ass Filter
Syst em Clock
Manager
Enhanced
Multilevel
DeltaœSigma
Modulator
DAC
Serial
Input
I/F
Function
Control
I/F
Syst em Clock
Zero Detect Power Supply
DAC Outp ut A mp and
DAC
DAC Outp ut A mp and
DAC Outp ut A mp and
DAC Outp ut A mp and
VOUT1
VOUT2
VOUT3
VCOM
VOUT4
VOUT5
VOUT6
Low-P ass Filter
Low-P ass Filter
Low-P ass Filter
Low-P ass Filter
Low-P ass Filter
Outp ut A mp and
AGND2
VCC2
AGND1
VCC1
DGND
VDD
ZERO1
ZERO2
BCK
LRCK
DATA1 (1, 2)
DATA2 (3, 4)
DATA3 (5, 6)
DATA4 (7, 8)
MS/ADR
MC/SCL
MD/SDA
MSEL
SCK
8
Oversampling
Digital Filter
With
Function
Controller
DAC Outp ut A mp and
DAC Outp ut A mp and
VOUT7
VOUT8
Low-P ass Filter
Low-P ass Filter
LC89057W-VF4A-E
LC89057W-VF4AD-E
A
1
2
3
4
5
6
7
8
9
10
BCDEFGH I JKLMN
All voltages are measured with a 10M/V DC electronic volt meter.
Components having special characteristics are marked s and must be replaced
with parts having specifications equal to those originally installed.
Schematic diagram is subject to change without notice.
FUNCTION
ANALOG IN
SUB
WOOFER
SURROUND
BACK L/R
SURROUND L CENTER
FRONT L
0
0
0
0
11.9
-12.0
0
0
0
0
0
0
0
11.9
00.1 0.1
-11.9
-11.9
0
0.1
0
-11.9
0.1
0
-11.9
0.1
0
-11.9
0.1
0
0.8
0.1
0.1
0
0
-11.9
-11.9
0.1
0.1
0
0
0.8
0.8
10.1 9.4
9.4
0.1
0.1
0.1
0.1
0.1
0.1
-10.1
-10.1
-10.8
00
7.800-7.7
-7.6 7.8
00
-6.9
7.1
-10.7
10.6
6.5
6.50
11.9 5.8
1.0
1.0
1.0
0
0.1
0.1
0.1
0.1
0.1
0.1
0
7.1
-6.9
0
0
0
0
0
0
0
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0
0.1
0.1
0
0.1
0.1
0.1
0.1
0.1
0.1
0
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0
0.1
0
0
0.1
0
0.1
0
0.1
0.1
0.1
0.1
0
0.1
0.1
0.1
0
0
0
0
0
0
0
0
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
-6.9
0
7.1
0
0
0
0
0
0
0
0
0.1
0
0.1
0.1
0
0
0
0.2
0.3
0.2
5.5
5.8
2.5
3.2
3.2
5.3
0
3.1
3.1
0
0
2.7
C-2
0.7
0.1
0.7
0.1
0.1
0
-4.9
0
5.0
0
0
0
0
0
0.1
0.1
2.5 2.5
0.1
0.1
0
0.1 0 0
0
4.9 2.5 2.5 2.5
4.9 4.9 4.9
0.6
0.1
0.6
0.1
0.1
0.6
0.1
0.6
4.9
5.0
2.9
2.9
0.7
0.1
0.7
0.1
0.1
0
-4.9
0
5.0
0.1
0.1
0.5
0.5
0.1
0.6
0.6
0
-4.9
0
-4.9
0
-4.9
2.9
5.0
0.1
5.0
0.1
5.0
0.1
0
0.7
0.1
0.1
0.1
0.1
0
-5.0
0
5.0
0.4
0.1
0.3
0.1
0.1
0.6
0.6
0.1 0.1
5.05.0 5.0
to DSP_CB1
Page 69 B3
to MAIN (1)_W1028
Page 74 B3
to MAIN (1)_W1027
Page 74 B2
to OPERATION (1)_W3002
Page 73 E9
to OPERATION (5)_W3007
Page 73 G6
to DSP_CB56
Page 71 C1
to OPERATION (2)_W2501
Page 73 L3
to OPERATION (2)_CB252
Page 73 J3
to DSP_CB2
Page 69 B7
to TUNER
to POWER TRANSFORMER
to OPERATION (4)_CB308
Page 73 D2
FUNCTION (2)
FUNCTION (1)
FUNCTION (4)
FUNCTION (3)
INPUT
SELECTOR
INPUT
SELECTOR
INPUT SELECTOR
OUTPUT
AMP
EXTENSION
SELECTOR
R, L models
IC290 : NJM2581M
Video amplifier
13 VOUT1
11 VOUT2
9VOUT3
8GND
10 V+3
14 V+1
12 V+2
2
NEE1
4
VEE2
6
VEE3
7
PowerSave
5
VIN3
1
VIN1
3
VIN2
75
Driver
6dB
AMP
BIAS
75
Driver
6dB
AMP
BIAS
75
Driver
6dB
AMP
BIAS
REF
IC200 : BD3816K1
7-channel volume IC for 7-channel
BD3816K1
1
2
3
4
5
6
7
TREBLE
REC A
REC B
REC C
FRL select
6.1ch select
Input
select
BASS
Output
mode
select
Master
Volume
ING SW
8
9
10
80
79
11
12
13
14
15
73
22
23
24
78
77
76
75
74
16
17
18
19
20
21
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
43
42
41
49
48
47
46
45
44
72
71
70
69
68
67
66
65
25 26 27 28 29 30 31 33 34 35 36 37 38 39 40
LOGIC
32
+
+
AGND1
INA1
INA2
INB1
INB2
INC1
INC2
IND1
IND2
INE1
INE2
INF1
INF2
AGND2
INDVDFR
INDVDFL
INDVDC
INDVDSR
INDVDSL
INDVDCB
INDVDSW
AGND3
OUT1
OUT2
VINFR
GOUTFL
VINFL
AGND10
TNF1
TNF2
BNFA1
BNFB1
BNFA2
BNFB2
OUTFR
OUTFL
AGND9
OUTC
OUTSR
OUTSL
OUTCB
AGND8
OUTSW
AGND7
VINC
GOUTC
VINSR
GOUTSR
AGND13
ROUTC2
ROUTC1
ROUTB2
ROUTB1
ROUTA2
ROUTA1
AGND12
VCC
VEE
AGND11
DA
CL
MUTE
THGND
GOUTFR
AGND4
INDSPFR
INDSPFL
INDSPC
INDSPSR
INDSPSL
INDSPCB
INDSPSW
AGND5
GOUTSW
VINSW
AGND6
GOUTCB
VINCB
GOUTSL
VINSL
F-SW1
F-SW1: INPUT FUNCTION 1
F-SW2: INPUT FUNCTION 2
*
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
IC202 : BD3841FS
Function switch
DGND
F-SW2 CL
DA
VEE
BIAS
VCC
RECA1
RECA2
RECB1
RECB2
RECC1
RECC2
OUT1
OUT2
INI1
INI2
INA1
INA2
INB1
INB2
INC1
INC2
IND1
IND2
INE1
INE2
INF1
INF2
ING1
ING2
INH1
INH2
LOGIC
+
+
+
+
IC205, 207 : NJM4565M
Dual operational amplifier
8
2, 6
3, 5
1, 7
4
V+
INPUT
+INPUT
V
OUTPUT
IC211 : NJM4556AL
Dual operational amplifier
IC286-288, 289 : TC74HC4052AF
Analog multiplexers/demultiplexers
8
2, 6
3, 5
1, 7
4
V+
INPUT
+INPUT
V
OUTPUT
IC209 : LC72722PM
RDS signal processor
REFERENCE
VOLTAGE
57 kHz
bpf
(SCF)
CCB
TEST
PLL
(57 kHz)
ANTIALIASING
FILTER
SMOOTHING
FILTER
RAM
(24 BLOCK DATA)
ERROR CORRECTION
(SOFT DECISION)
SYNC / EC
CONTROLLER
SYNC
DETECT-1
DATA
DECODER
CLOCK
RECOVERY
(1187.5 Hz)
MEMORY
CONTROL
OSC/DIVIDER
VREF
CLK (4.332 MHz)
SYNC
DETECT-2
VDDA
VSSD
VDDD
RDS-ID
SYNC
SYR
VSSA
MPX IN
DO
CL
DI
CE
T1
T2
T3
T4
T5
T6
T7
X IN
VREF
FL OUT
C IN
X OUT
314
15
19
18
24
1 5 6
4
2
20
21
22
23
7
8
9
10
11 16 17 13 12
IC291 : TC74VHCU04FT
Hex inverters
1A
1Y
2Y
VCC
6A
1
2
3
411
2A 6Y
5A
12
13
14
3A
3Y
5Y
4A
5
6
74Y
8
9
10
GND
16
VCC
6
INH
10
A
9
B
8
GND
7
VEE
12
0X
14
1X
15
2X
11
3X
1
0Y
5
1Y
2
2Y
4
3Y
LEVEL
CONVERTER
BINARY TO 1-OF-4
DECODER WITH INHIBIT
SW
SW
SW
SW
SW
SW
SW
SW
13
X-COM
3
Y- C O M
INHIBIT
0
0
0
0
1
B
0
0
1
1
X
A
0
1
0
1
X
0x, 0y
1x, 1y
2x, 2y
3x, 3y
NONE
A
1
2
3
4
5
6
7
8
9
10
BCDEFGH I JKLMN
All voltages are measured with a 10M/V DC electronic volt meter.
Components having special characteristics are marked s and must be replaced
with parts having specifications equal to those originally installed.
Schematic diagram is subject to change without notice.
OPERATION
220K
s13
100K
6800P6800P
TC74HC4051AF
TC74HC4051AF
TC74HC4051AF
to POWER CABLE
to MAIN (1)_W1029
Page 74 H7
to DSP_CB3
Page 69 B8
to FUNCTION (1)_CB205
Page 72 E7
to DSP_CB5
Page 69 B5
to TRANSFORMER
to FUNCTION (1)_CB203
Page 72 E1
to FUNCTION (2)_CB290
Page 72 H3
to FUNCTION (1)_CB201
Page 72 C9
to MAIN (2)_W1006
Page 74 J8
to FUNCTION (3)_W3005A,W3005B
R, L models
U, C, T, K, A, G, J models
Page 72 J9
to POWER TRANSFORMER
OPERATION (4)
OPERATION (1)
OPERATION (5)
OPERATION (3)
OPERATION (6)
OPERATION (2)
FL DRIVER
IC251 : LA73050-TLM-E
Analog amplifier
35 N.C.
33 VOUT1
31 VOUT2
30 N.C.
29 VOUT3
32 GND
36 N.C.
34 +VCC1
2
N.C.
4
DCCNT1
6
VIN2
7
MUTE1
8
VIN3
5
GND
1
N.C.
3
VIN1
27 -VCC2
25 +VCC2
23 GND
22 VOUT5
21 N.C.
24 VOUT4
28 -VCC1
26 N.C.
10
N.C.
12
VIN4
14
GND
15
VIN5
16
MUTE2
13
DCCNT2
9
N.C.
11
N.C.
19 -VCC3
20 VOUT6
18
-VCC4
17
VIN6
DR6dB
+Vcc
DR6dB
DR6dB
DR6dB
+Vcc
DR6dB
DR6dB
52
Display
controller
Segment
digit
select/
output
circuit
Serial
receive
circuit
Digit
output
circuit
Clock
generator
DIG11/
SEG42
51
DIG12/
SEG41
50
DIG13/
SEG40
49
DIG14/
SEG39
48
DIG15/
SEG38
47
DIG16/
SEG37
46
DIG17/
SEG36
45
SEG35
XOUT
6
Vcc1
8
Vcc2
18
Vss
5
Vp
64
XIN
7
CS
SCK
3
SDATA
4
RESET
1
SEG00
44
9
SEG34
SEG26
17
19
SEG25
Segment
output
circuit
Display code
RAM
(8-bit x 60)
CGROM
(35 bit x 166)
CGROM
(35 bit x 16)
code
select
Code
write
Code/
command
control
circuit
DIG00
63
53
DIG10
IC301 : M66003-0131FP
FL display driver
2
data
timing
clock
dot data
write
scan pulse
IC302 : TC4013BP
Dual D-type flip flop
4
RESET1
1Q1
6
SET1
5
DATA1
CL
3
CLOCK1
CL
CL
CL CL
CL
2Q1
10
RESET2
13
Q2
8
SET2
9
DATA2
7
VSS
14
VDD
11
CLOCK2
12
Q2
CL
CL
CL
CL CL
CL
IC253~255 : TC74HC4051AF
Analog multiplexers/demultiplexers
14
15
16
9
13
12
11
10
1
2
3
4
5
7
6
8
4
6
7
5
INH
GND
VEE
VCC
1
0
3
A
B
C
2
COM
RX-V459/HTR-5940/DSP-AX459 models
HTR-5935 model
no_use (HTR-5935 model)
no_use (HTR-5935 model)
RX-V459/HTR-5940/
DSP-AX459 models
HTR-5935 models
RX-V459/DSP-AX459 models
RX-V459/DSP-AX459 models
D3015 VU99500
MA8091-M9.1V
VU99500
MA8091-M9.1V
VU99500
MA8091-M9.1V
VU99500
MA8091-M9.1V
VU99500
MA8091-M9.1V
VU99500
MA8091-M9.1V
VU99500
MA8091-M9.1V
VU99470
MA8082-H8.5V
A
1
2
3
4
5
6
7
8
9
10
BCDEFGH I JKLMN
All voltages are measured with a 10M/V DC electronic volt meter.
Components having special characteristics are marked s and must be replaced
with parts having specifications equal to those originally installed.
Schematic diagram is subject to change without notice.
MAIN
SURROUND BACK L/R
FRONT L
SURROUND L/R
CENTER
SUBWOOFER
10.2
38.6
10.5
8.2
36.8
36.8
36.8
36.836.8
36.8
10.0
10.0
10.2
10.5
4.8
4.2
4.8
4.8
4.2
4.3
4.8
4.3
0.1
0
8.2
0
0
0
0
0.1
0.1
0.1
0.1
0.1
59.9
59.8
0
00
0
0.1
5.0
0
0
36.9
36.9
36.9
36.9
0.1
-37.5
-36.5
-28.6
0
0
0
-29.2
-29.2
0
0
59.6
0.1
0.6
0.6
-0.5
-0.5
-0.5
-60.1
-1.0
-60.1
-57.7
-57.2
-57.2
-58.3
0.6
1.1
1.1
59.9
59.9
0.1
-1.0
-1.0 1.1
-1.0
-0.4
0
0
0
0
0
-0.6
58.2
0
-0.6
58.2
58.2
58.8
58.2
59.3
1.1
1.0
58.8
-0.6
0
0
59.3
-0.6
0
-0.6
58.2
58.2
58.8
1.1
0
59.3
-0.6
0
-0.6
58.2
58.2
58.8
1.1
0
59.5
-0.6
0
-0.5
58.2
58.2
58.7
1.1
0
59.3
-0.5
0
-13.6
-58.2
-58.2
-59.1
1.1
0
-59.4
-13.6
0.1
0
59.6
0.1
0.6
0.6
-0.5
-0.5
-0.5
-60.1
-1.0
-60.1
-57.7
-57.2
-57.2
-58.3
0.6
1.1
1.1
59.9
59.9
0.1
-1.0
-1.0 1.1
-1.0
-0.4 0
0
0.1
0
59.6
0
0.6
0.6
-0.5
-0.5
-60.1
-1.0
-60.1
-57.7
-57.2
-57.2
-58.3
1.1
1.1
59.9
59.9
0
-1.0
-1.0 1.1
-1.0
-0.4
0
0
0
0
59.6
0
0.6
0.6
-0.5
-0.5
-60.1
-1.0
-60.1
-57.7
-57.2
-57.2
-58.3
1.1
1.1
59.9
59.9
0
-1.0
-1.0 1.1
-1.0
-0.4
0
0
0
0
59.6
0
0.6
0.6
-0.5-0.5
-60.1
-1.0
-60.1
-57.7
-57.2
-57.2
-58.3
1.1
1.1
59.9
59.9
0
-1.0
-1.0 1.1
-1.0
-0.4
0
0
0
0
59.6
0
0.6
0.6
-0.5
-0.5
-60.1
-1.0
-60.1
-57.2
-57.7
-57.2
-58.3
1.1
1.1
59.9
59.9
0
-1.0
-1.0 1.1
-1.0
-0.4
0
0
0
0
AC32.0AC19.8AC23.1 AC88.7 AC56.7
30.3 23.2
0
0.9 5.0
0
20.4 11.9
-21.0 -12.0
0
0
-12.9 -5.0
0
11.2
5.0
0
11.2
5.0
0
11.2
3.3
0
60.0 -60.1
0.1
0
-0.1 -0.1
20.4
-21.1
-0.1
-0.1
20.4
-21.1
13.8
13.3
30.4
0
0.1
0.1
11.8 11.5
11.2
11.8 11.8
0
0
5.0
-13.6
-54.2
-14.1
0
-14.1
4.5
4.2
-59.4
00
0
0
-58.9
0
4.8
4.2
-59.4 59.4
-58.3 -60.1
-48.7
-16.9
to DSP_CB9
Page 69 B9
to DSP_CB4
Page 69 B9
to DSP_CB57
Page 71 D1
to OPERATION (4)_CB331
Page 73 C5
to MAIN (1)_W1002A
Page 74 H9
to OPERATION (2)_CB251
Page 73 I3
YST_CB500
Page 75 B4
to FUNCTION (1)_CB206
Page 72 E8
to FUNCTION (1)_CB207
Page 72 E8
to TRANSFORMER
to TRANSFORMER
to MAIN (2)_W1002B
Page 74 J8
MAIN (5)
MAIN (4)
MAIN (2)
MAIN (1)
IC107 : NJM2388F
Low dropout voltage regulator with ON/OFF control
GND
Cont
Vin Vout
2
1
4
3
Thermal
Protection
Bandgrap
Reference
ON/OFF
control
Over Voltage
Protection
Over Current
Protection
+
-
IC104 : NJM7812FA
Voltage regulator
INPUT
OUTPUT
COMMON
IC103 : NJM79M05FA
Voltage regulator
COMMON
OUTPUT
INPUT
IC105 : NJM79M12FA
Voltage regulator
COMMON
OUTPUT
INPUT
IC101: LM61CIZ
Temperature sensor
IC100, 102, 106 : NJM2388F
Low dropout voltage regulator with ON/OFF control
GND
Cont
Vin Vout
21
4
3
Thermal
Protection
Bandgrap
Reference
ON/OFF
control
Over Voltage
Protection
Over Current
Protection
+
-
HTR-5935 models: 100
RX-V459/DSP-AX459
models
RX-V459/DSP-AX459
models
no use(RX-V459/DSP-AX459 models)
HTR-5935 model
RX-V459/DSP-AX459 models
RX-V459/DSP-AX459 models
RX-V459/DSP-AX459
models
RX-V459/DSP-AX459 models
RX-V459/DSP-AX459
models
4.7/50
4.7/50
4.7/50
4.7/50
4.7/50
4.7/50
A
1
2
3
4
5
6
7
8
9
10
BCDEFGH I JKLMN
All voltages are measured with a 10M/V DC electronic volt meter.
Components having special characteristics are marked s and must be replaced
with parts having specifications equal to those originally installed.
Schematic diagram is subject to change without notice.
YST HTR-5935
SUBWOOFER
to MAIN (1)_CB101
Page 74 C9
YST
IC500 : NJM2068LD
Dual operational-amplifier
8
2, 6
3, 5
1, 7
4
V+
INPUT
+INPUT
V
OUTPUT
RX-V459/HTR-5940
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Yamaha HTR-5940 User manual

Category
Hobs
Type
User manual
This manual is also suitable for

Yamaha HTR-5940 is an AV receiver/amplifier that offers various features for enhancing the audio and video experience in a home theater or entertainment system. It provides numerous connectivity options, including inputs for DVD, DTV/CBL, DVR, and AUX devices, allowing you to connect various audio and video sources. With its high-quality amplifier and advanced processing capabilities, it delivers powerful and immersive surround sound, bringing your movies, music, and games to life.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI