Basic technical data sheet
Use and installation info
Not included with the product
Ponte Giulio suggest to use fasteners suitable to the wall characteristics
on which the product will be installed.
Fold down shower seat, ABS base, with fold away legs to add to the support
of the seat. There may be a case that the wall structure is not strong enough
to support the seat so using a seat with legs will assist the installation and
provide extra strength. The seat is manufactured from ABS and available in a
range colours. A small water outlet hole is in the centre of the seat which
prevents water filling the seat area. The concealed fixing of the seat is an
Nylon bag in cardboard packaging
Clean using pure water and home disinfectants which have been sufficiently
diluted in water. Do not use abrasive detergents and trichloroethylene,
oxygenated water or acetone-based solvents.
All herein data are subject to continuous technical updating. The manufacturer reserves the right to make change and
improvements to the product herein described without any previous notice.
© Ponte Giulio S.p.A. all rights reserved