Greenheck 469129 Round Operating instructions

Type
Operating instructions

Greenheck 469129 Round dampers are UL Classified to meet both US and Canadian safety standards. They are designed for horizontal installation in concrete floors utilizing a steel deck. The dampers come with a single retaining plate, but a second retaining plate can be ordered as an option. The dampers are available in a variety of sizes to accommodate different ductwork dimensions.

Features

  • UL Classified to meet both US and Canadian safety standards
  • Horizontal installation in concrete floors utilizing a steel deck
  • Single retaining plate included (second retaining plate optional)

Greenheck 469129 Round dampers are UL Classified to meet both US and Canadian safety standards. They are designed for horizontal installation in concrete floors utilizing a steel deck. The dampers come with a single retaining plate, but a second retaining plate can be ordered as an option. The dampers are available in a variety of sizes to accommodate different ductwork dimensions.

Features

  • UL Classified to meet both US and Canadian safety standards
  • Horizontal installation in concrete floors utilizing a steel deck
  • Single retaining plate included (second retaining plate optional)
Document 469129
Round Fire Rated Dampers Installed
in Concrete Floor with Steel Deck
steel deck
steel deck
Concrete floor
Concrete floor
retaining plate
retaining plate
RRL, RRL/OCI,
TOR
RRL, RRL/OCI,
TOR
For dimension information-see submittals
For dimension information-see submittals
Refer to:
'Installation Instructions for FDR, SSFDR, DFDR, FSDR
Series Round Fire Dampers (Part #481319)
"UL CLASSIFIED (see complete marking on
product)"
"UL CLASSIFIED to Canadian Safety
Standards (see complete marking on
product)"
Standard 555 (Listing #R13317)
Standard 555S (Listing # R13447)
Application
Horizontal installation of round damper models in
concrete floors utilizing a steel deck. The hold opening
made through the concrete floor may not allow the
bottom plate to be placed against the steel deck on
an even plane. This installation details how to properly
install the required retaining plates next to the steel
deck.
Notes
1. Damper assemblies must be installed in wall/floor
openings using a single retaining plate on either side
of the wall/floor. The use of a second retaining plate is
allowed, but is not necessary. A single retaining plate is
provided with the dampers. A second retaining plate can
be ordered as an option.
Figure 1: Damper installed in concrete floor with steel
deck with actuator above the floor.
Figure 2: Damper installed in concrete floor with steel
deck with actuator below the floor.
Models:
DFDR-510, FDR-510, FSDR-511, FSDR-512,
SEDFDR-510, SEFSDR-511, SSDFDR-510,
SSFDR-510, SSFSDR-511
469129 • Concrete Floor Round Dampers, Rev. 3, May 2019 Copyright 2019 © Greenheck Fan CorporationGFC
As a result of our commitment to continuous improvement, Greenheck reserves the right to change specifications
without notice.
Product warranties can be found online at Greenheck.com, either on the specific product page or in the
literature section of the website at Greenheck.com/Resources/Library/Literature.
®
Phone: 715.359.6171 • Fax: 715.355.2399 • Parts : 800.355.5354 • E-mail: [email protected] • Website: www.greenheck.com
Our Commitment
  • Page 1 1

Greenheck 469129 Round Operating instructions

Type
Operating instructions

Greenheck 469129 Round dampers are UL Classified to meet both US and Canadian safety standards. They are designed for horizontal installation in concrete floors utilizing a steel deck. The dampers come with a single retaining plate, but a second retaining plate can be ordered as an option. The dampers are available in a variety of sizes to accommodate different ductwork dimensions.

Features

  • UL Classified to meet both US and Canadian safety standards
  • Horizontal installation in concrete floors utilizing a steel deck
  • Single retaining plate included (second retaining plate optional)

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI