Gamber-Johnson Freightliner M2 Dash Mount Installation guide

Type
Installation guide

This manual is also suitable for

Gamber-Johnson Freightliner M2 Dash Mount

The Gamber-Johnson Freightliner M2 Dash Mount is designed to mount over the current vehicle heater controls and use a Zirkona for Big Rigs mount to complete the solution. It is easy to install and can be positioned anywhere along the top of the Freightliner M2 mount for best viewing by the driver. The mount is compatible with various devices and can be used to mount a variety of items, such as phones, tablets, and GPS devices.

Here are some of the features and benefits of the Gamber-Johnson Freightliner M2 Dash Mount:

  • Easy to install
  • Can be positioned anywhere along the top of the mount for best viewing by the driver

Gamber-Johnson Freightliner M2 Dash Mount

The Gamber-Johnson Freightliner M2 Dash Mount is designed to mount over the current vehicle heater controls and use a Zirkona for Big Rigs mount to complete the solution. It is easy to install and can be positioned anywhere along the top of the Freightliner M2 mount for best viewing by the driver. The mount is compatible with various devices and can be used to mount a variety of items, such as phones, tablets, and GPS devices.

Here are some of the features and benefits of the Gamber-Johnson Freightliner M2 Dash Mount:

  • Easy to install
  • Can be positioned anywhere along the top of the mount for best viewing by the driver
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
Rev.A
INST-866
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
Revision
© Copyright 2018 Gamber-Johnson, LLC
7160-1301
Freightliner M2 dash mount
PS-001
Printing Spec:
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Form Product
INSTALLATION INSTRUCTIONS
(4) sheet metal screws
Freightliner M2 dash mount
The Freightliner dash mount is designed to mount over the current vehicle heater
other products sold by Gamber-Johnson please reference their specific instruction
sheets.
controls and use a Zirkona for Big Rigs mount to complete the solution.
This instruction sheet is for the Gamber-Johnson Freightliner M2 dash mount. For
longer screws and
lock washers
Attaching the mount:
1. Remove the (4) sheet metal
screws that hold the heater
control panel in place.
2. Place the Freightliner M2
dash mount over the heater
control panel and attach with
the 1-1/4" long sheet metal
screws and lock washers
found in hardware bag 7120-
0880.
Note: Be careful not to
overtighten the screws. They
are attaching to "U" nuts.
device being mounted
(various options)
#10-32 machine screws,
Zirkona for Big Rigs mount
application.
anywhere along the top of the Freightliner M2 mount that best fits your specific
supplied with the device. Position the mount for best viewing by the driver.
4. Attach the device being mounted to the Zirkona for Big Rigs mount with the hardware
flat washers, and lock nuts
Attaching the mount (continued):
3. To complete your solution you will need a Zirkona for Big Rigs mount. Attach the Zirkona
mount to the Freightliner M2 dash mount with the #10-32 x 1" machine screws, flat washers,
and lock nuts supplied in hardware bag 7120-880. The Zirkona mount can be positioned
device being mounted
(various options)
  • Page 1 1
  • Page 2 2

Gamber-Johnson Freightliner M2 Dash Mount Installation guide

Type
Installation guide
This manual is also suitable for

Gamber-Johnson Freightliner M2 Dash Mount

The Gamber-Johnson Freightliner M2 Dash Mount is designed to mount over the current vehicle heater controls and use a Zirkona for Big Rigs mount to complete the solution. It is easy to install and can be positioned anywhere along the top of the Freightliner M2 mount for best viewing by the driver. The mount is compatible with various devices and can be used to mount a variety of items, such as phones, tablets, and GPS devices.

Here are some of the features and benefits of the Gamber-Johnson Freightliner M2 Dash Mount:

  • Easy to install
  • Can be positioned anywhere along the top of the mount for best viewing by the driver

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI