ESAB SL55 Plasma Cutting Hand Torch is used for shielded drag cutting and standoff cutting. It can be used with the Lincoln Pro-Cut 55 power supply. The torch has a cutting capacity of 60 Amps and comes with 25' or 50' torch leads. The torch includes a torch handle and torch trigger assembly. The torch head is at 75° to the torch handle. The torch also includes a Parts-In-Place (PIP) circuit, which includes a switch on the torch head. The shield cup closes this switch when properly installed. The torch will not operate if this switch is open.
ESAB SL55 Plasma Cutting Hand Torch is used for shielded drag cutting and standoff cutting. It can be used with the Lincoln Pro-Cut 55 power supply. The torch has a cutting capacity of 60 Amps and comes with 25' or 50' torch leads. The torch includes a torch handle and torch trigger assembly. The torch head is at 75° to the torch handle. The torch also includes a Parts-In-Place (PIP) circuit, which includes a switch on the torch head. The shield cup closes this switch when properly installed. The torch will not operate if this switch is open.
ESAB SL55 Plasma Cutting Hand Torch is used for shielded drag cutting and standoff cutting. It can be used with the Lincoln Pro-Cut 55 power supply. The torch has a cutting capacity of 60 Amps and comes with 25' or 50' torch leads. The torch includes a torch handle and torch trigger assembly. The torch head is at 75° to the torch handle. The torch also includes a Parts-In-Place (PIP) circuit, which includes a switch on the torch head. The shield cup closes this switch when properly installed. The torch will not operate if this switch is open.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI