Yorkville Sound MP6D2 User manual

Yorkville Sound
Brand
Yorkville Sound
Model
MP6D2
Category
DJ controllers
Type
User manual

This manual is also suitable for

U.S.A.
Yorkville Sound Inc.
4625 Witmer Industrial Estate
Niagara Falls, New York
14305 USA
Voice: (716) 297-2920
Fax: (716) 297-3689
WORLD HEADQUARTERS
WEB ACCESS: http://www.yorkville.com
CANADA
Yorkville Sound
550 Granite Court
Pickering, Ontario
L1W-3Y8 CANADA
Voice: (905) 837-8481
Fax: (905) 837-8746
Quality and Innovation Since 1963
Printed in Canada
SERVICE MANUAL
MP6D Series 2
MODEL TYPE: YS1014
Manual-Service-MP6D2-00-1v0.pdf
The exclamation point within an equilatereal triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Le point d’exclamation à l’intérieur d’un triangle équilatéral
est prévu pour alerter l’utilisateur de la présence
d’instructions importantes dans la littérature accompag-
nant l’appareil en ce qui concerne l’opération et la
maintenance de cet appareil.
This lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user to
the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
Ce symbole d’éclair avec tête de flèche dans un triangle
équilatéral est prévu pour alerter l’utilisateur de la présence d’un
« voltage dangereux » non-isolé à proximité de l’enceinte du
produit qui pourrait être d’ampleur suffisante pour présenter
un risque de choque électrique.
IMPORTANT SAFETY INSTRUCTIONS
safety-4v7 • May 7/2008
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
FOLLOW ALL INSTRUCTIONS SUIVEZ TOUTES LES INSTRUCTIONS
Instructions pertaining to a risk of fire,
electric shock, or injury to a person
Read Instructions: The Owner’s Manual should be read and understood before operation
of your unit. Please, save these instructions for future reference and heed all warnings.
Clean only with dry cloth.
Packaging: Keep the box and packaging materials, in case the unit needs to be
returned for service.
Warning: To reduce the risk or fire or electric shock, do not expose this apparatus to rain or
moisture. Do not use this apparatus near water!
Warning: When using electric products, basic precautions should always be followed,
including the following:
Power Sources
Your unit should be connected to a power source only of the voltage specified in the
owners manual or as marked on the unit. This unit has a polarized plug. Do not use
with an extension cord or receptacle unless the plug can be fully inserted. Precau-
tions should be taken so that the grounding scheme on the unit is not defeated. An
apparatus with CLASS I construction shall be connected to a Mains socket outlet with
a protective earthing ground. Where the MAINS plug or an appliance coupler is used
as the disconnect device, the disconnect device shall remain readily operable.
Hazards
Do not place this product on an unstable cart, stand, tripod, bracket or table. The
product may fall, causing serious personal injury and serious damage to the product.
Use only with cart, stand, tripod, bracket, or table recommended by the manufacturer
or sold with the product. Follow the manufacturer’s instructions when installing the
product and use mounting accessories recommended by the manufacturer. Only use
attachments/accessories specified by the manufacturer
Note: Prolonged use of headphones at a high volume may cause
health damage on your ears.
The apparatus should not be exposed to dripping or splashing water; no objects
filled with liquids should be placed on the apparatus.
Terminals marked with the “lightning bolt” are hazardous live; the external wiring
connected to these terminals require installation by an instructed person or the use of
ready made leads or cords.
Ensure that proper ventilation is provided around the appliance. Do not install near
any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
Power Cord
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet. The AC supply cord should be routed so that it is unlikely that it will be
damaged. Protect the power cord from being walked on or pinched particularly at plugs. If
the AC supply cord is damaged DO NOT OPERATE THE UNIT. To completely disconnect
this apparatus from the AC Mains, disconnect the power supply cord plug from the AC
receptacle. The mains plug of the power supply cord shall remain readily operable.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Service
The unit should be serviced only by qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
AVIS: AFIN DE REDUIRE LES RISQUE DE CHOC
ELECTRIQUE, N’ENLEVEZ PAS LE COUVERT (OU LE
PANNEAU ARRIERE) NE CONTIENT AUCUNE PIECE
REPARABLE PAR L’UTILISATEUR.
CONSULTEZ UN TECHNICIEN QUALIFIE
POUR L’ENTRETIENT
Instructions relatives au risque de feu,
choc électrique, ou blessures aux personnes
Veuillez Lire le Manuel: Il contient des informations qui devraient êtres comprises avant
l’opération de votre appareil. Conservez. Gardez S.V.P. ces instructions pour consultations
ultérieures et observez tous les avertissements.
Nettoyez seulement avec le tissu sec.
Emballage: Conservez la boite au cas ou l’appareil devait être retourner pour réparation.
Avertissement: Pour réduire le risque de feu ou la décharge électrique, n'exposez pas
cet appareil à la pluie ou à l'humidité. N’utilisez pas cet appareil près de l’eau!
Attention: Lors de l’utilisation de produits électrique, assurez-vous d’adhérer à des
précautions de bases incluant celle qui suivent:
Alimentation
L’appareil ne doit être branché qu’à une source d’alimentation correspondant au
voltage spécifié dans le manuel ou tel qu’indiqué sur l’appareil. Cet appareil est équipé
d’une prise d’alimentation polarisée. Ne pas utiliser cet appareil avec un cordon de
raccordement à moins qu’il soit possible d’insérer complètement les trois lames. Des
précautions doivent êtres prises afin d’eviter que le système de mise à la terre de
l’appareil ne soit désengagé. Un appareil construit selon les normes de CLASS I
devrait être raccordé à une prise murale d’alimentation avec connexion intacte de mise
à la masse. Lorsqu’une prise de branchement ou un coupleur d'appareils est utilisée
comme dispositif de débranchement, ce dispositif de débranchement devra demeurer
pleinement fonctionnel avec raccordement à la masse.
Risque
Ne pas placer cet appareil sur un chariot, un support, un trépied ou une table instables.
L’appareil pourrait tomber et blesser quelqu’un ou subir des dommages importants.
Utiliser seulement un chariot, un support, un trépied ou une table recommandés par le
fabricant ou vendus avec le produit. Suivre les instructions du fabricant pour installer
l’appareil et utiliser les accessoires recommandés par le fabricant. Utilisez seulement
les attachements/accessoires indiqués par le fabricant
Note: L'utilisation prolongée des écouteurs à un volume élevé peut
avoir des conséquences néfastes sur la santé sur vos oreilles. .
Il convient de ne pas placer sur l’appareil de sources de flammes nues, telles que
des bougies allumées.
L’appeil ne doit pas être exposé à des égouttements d’eau ou des éclaboussures
et qu’aucun objet rempli de liquide tel que des vases ne doit être placé sur l’appareil.
Assurez que lappareil est fourni de la propre ventilation. Ne procédez pas à
l’installation près de source de chaleur tels que radiateurs, registre de chaleur, fours
ou autres appareils (incluant les amplificateurs) qui produisent de la chaleur.
Les dispositifs marqués d’une symbole “d’éclair” sont des parties dangereuses
au toucher et que les câblages extérieurs connectés à ces dispositifs de
connection extérieure doivent être effectivés par un opérateur formé ou en utilisant
des cordons déjà préparés.
Cordon d’Alimentation
Ne pas enlever le dispositif de sécurité sur la prise polarisée ou la prise avec tige de
mise à la masse du cordon d’alimentation. Une prise polarisée dispose de deux lames
dont une plus large que l’autre. Une prise avec tige de mise à la masse dispose de
deux lames en plus d’une troisième tige qui connecte à la masse. La lame plus large ou
la tige de mise à la masse est prévu pour votre sécurité. La prise murale est désuète si
elle n’est pas conçue pour accepter ce type de prise avec dispositif de sécurité. Dans
ce cas, contactez un électricien pour faire remplacer la prise murale. Évitez
d’endommager le cordon d’alimentation. Protégez le cordon d’alimentation. Assurez-
vous qu’on ne marche pas dessus et qu’on ne le pince pas en particulier aux prises.
N’UTILISEZ PAS L’APPAREIL si le cordon d’alimentation est endommagé. Pour
débrancher complètement cet appareil de l’alimentation CA principale, déconnectez le
cordon d’alimentation de la prise d’alimentation murale. Le cordon d’alimentation du
bloc d’alimentation de l’appareil doit demeurer pleinement fonctionnel.
Débranchez cet appareil durant les orages ou si inutilisé pendant de longues périodes.
Service
Consultez un technicien qualifié pour l’entretien de votre appareil. L'entretien est
nécessaire quand l'appareil a été endommagé de quelque façon que se soit. Par exemple
si le cordon d’alimentation ou la prise du cordon sont endommagés, si il y a eu du liquide
qui a été renversé à l’intérieur ou des objets sont tombés dans l'appareil, si l'appareil a été
exposé à la pluie ou à l'humidité, si il ne fonctionne pas normalement, ou a été échappé.
S2125A
MP6D2 Parts List 3/24/2010
YS # Descriptio
n
Qty. YS # Descriptio
n
Qty. YS # Descriptio
n
Qty.
5906 RED 3MM LED 1V9 20MA.4SPCER T&R 11 4568 _50K B LIN 9MM P25 8 4801 1/4W 6K98 1% T&R RES 4
5908 GRN 3MM LED 1V9 20MA.4SPCER T&R 1 3996 _20K LIN 30MM DETENT S12 9 4990 1/4W 8K2 5%MINI T&R RES 1
6425 BAV21 200V 0A25 DIODE T&R 2 4529 470R TRIM POT 1 4800 1/4W 10K0 1% T&R RES 3
6434 6A2 200V 6A0 DIODE 4 3804 SNAP ON 1.500" INSULATING BUSHING 1 4829 1/4W 10K 5% T&R RES 6
6438 1N4007 1000V 1A0 DIODE T&R 10 3819 ___5UH COIL 18AWG R000 AIR CORE 1 4983 1/4W 10K 5%MINI T&R RES 2
6733 BAT85 30V 0A2 DIODE SCHT T&R 1 8674 PLASTIC CHEVRON CORNER RE'AN R385 8 6116 1/4W 10K0 1%MINI MF T&R RES 7
6825 1N4148 75V 0A45 DIODE T&R 28 3489 CLIP 250X032 18-22AWG DISCO/INSL 2 4901 1/4W 13K 5% T&R RES 7
6436 1N753ARL 6V2 0W5 ZENER 5% T&R 1 3490 CLIP 250X032 14-16AWG DISCO/INSL 1 4979 1/4W 15K 5%MINI T&R RES 1
6439 1N5225B 3V0 0W5 ZENER 5% T&R 1 3491 CLIP 205/187X020 18-22AWG DISCO/INS 2 4831 1/4W 18K 5% T&R RES 2
6440 1N750ARL 4V7 0W5 ZENER 5% T&R 3 3795 #8 GROUND LUG ZIERICK 505-169 1 6125 1/4W 18K 5%MINI T&R RES 14
6460 1N5260B 43V0 0W5 ZENER 5% T&R 1 3498 1/4" JCK PCB MT HORZ 2 4885 1/4W 20K 5% T&R RES 3
6824 1N5246B 16V0 0W5 ZENER 5% T&R 2 3921 1/4" JCK PCB MT VERT STER RT SWT 8 6123 1/4W 20K0 1%MINI MF T&R RES 2
6855 NJM7805FA TO220 P 5V0 REG IS V1 1 3466 RCA DUAL PCB MT VERT GOLD 24MM 3 6118 1/4W 22K 5%MINI T&R RES 6
6856 NJM7815FA TO220 P 15V0 REG IS V1 1 4010 XLR FEML PCB MT VERT 24MM AA-SERIES 6 4833 1/4W 27K 5% T&R RES 2
6857 NJM7915FA TO220 N 15V0 REG IS V2 1 3451 EYELET SMALL 0.089 OD PLATED 16 4840 1/4W 33K 5% T&R RES 9
5101 BC550C TO92 NPN TRAN T&R TB 5 3412 LOWPROFILE FUSEHOLDER FOR .25X1.25 1 6122 1/4W 33K 5%MINI T&R RES 14
5102 BC560C TO92 PNP TRAN T&R TB 2 2428 _6.0 AMP SLO-BLO .25X1.25 FUSE 1 4853 1/4W 39K 5% T&R RES 1
5103 MPSA06 TO92 NPN TRAN T&R TA 9 8458 10.5" STRAP HANDLE, PLASTIC COVERS 1 4908 1/4W 45K3 1% T&R RES 2
5108 2N5401 TO92 PNP TRAN T&R TA 1 3563 TRANSISTOR MOUNTING BRACKET 1 4834 1/4W 47K 5% T&R RES 5
6810 MJF15030 T221D NPN TRAN TJ 1 3803 NYLON SECUR-A-TACH MINI PLASTIC TIE 1 4927 1/4W 47K 5% .2"U T&R RES 1
6811 MJF15031 T221D PNP TRAN TJ 1 3810 4" NYLON CABLE TIE 7 6119 1/4W 47K 5%MINI T&R RES 5
6912 BDX53C TO220 NPN TRAN DARL TE 1 3827 SQUARE BUMPER BUTTON BLACK 5 4928 1/4W 56K 5% .2"U T&R RES 2
6909 MJ21196 TO3 NPN TRAN TH 2 3638 12 CIR CABLE HOLDER .098 1 4586 1/4W 82K 5%MINI T&R RES 2
6910 MJ21195 TO3 PNP TRANSISTOR TH 2 3580 12 CIR WAFER W/LCK VT 0.1" 1 4929 1/4W 82K 5% .2"U T&R RES 12
6798 MC4741CP IC QUAD OP AMP 1 8392 KNOB STYLE 1 RED 7 4838 1/4W 100K 5% T&R RES 2
6804 MC33079P IC QUAD OP AMP 1 8393 KNOB STYLE 1 GREY 12 4942 1/4W 100K 5% .2"U T&R RES 2
6840 MC33078P IC DUAL OP AMP 3 8394 KNOB STYLE 1 GREEN 7 6120 1/4W 100K 5%MINI T&R RES 6
6882 TL072CP IC FET DUAL OP AMP 6 8395 KNOB STYLE 1 BLUE 9 4839 1/4W 150K 5% T&R RES 1
6889 TL074CN IC QUAD O/A T.I ONLY 5 8397 KNOB STYLE 2 GREY 1 4841 1/4W 220K 5% T&R RES 1
5190 MBS4992 TO92 8V5 DIAC T&R 1 8661 KNOB BUTTON FLAT GREY 1 4842 1/4W 330K 5% T&R RES 1
6467 _10K 10% THERMISTOR TO-92 NTC 1 3484 8' 3/18 SJT AC LINE CORD 250WH187BL 1 6127 1/4W 470K 5%MINI T&R RES 1
6470 MAC15A6FP TO220 15A TRIAC 400V 1 3834 STRAIN RELIEF HEYCO #1214 1 4951 1/4W 4M7 5% .2"U T&R RES 6
6858 NSL-32SR2 OPTO-COUPLER LDR 1 8800 6-32 KEPS NUT ZINC 33 3740 15.0"12C-26AWG RIB 1 W/LCK HDR 098" 1
5402 _15P 100V 10%CAP T&R BEAD NPO 1 8854 6-32 X 1/4" 0.D. HEX NUT ZINC CLEAR 1 3696 RELAY 1C 02AMP DC24 006MA PC-S 1
5199 100P 100V 2%CAP T&R RAD CER.2NPO 1 8604 10-32 T NUT 2 8842 #4 X 5/16 PAN QUAD TYPE A JS500 BLK 15
5203 _47P 100V 2%CAP T&R RAD CER.2NPO 5 8797 5/16-18 KEPS NUT JS500 1 8902 4-40 X 3/4 PAN PHIL MS B/O & WAX 10
5411 150P 100V 10%CAP T&R BEAD NPO 2 3916 TO3 SIL-PAD REPLACES MICA 4 8799 #6 X 1/4 PAN PH TYPE B JS500 1
5201 470P 100V 5%CAP T&R RAD CER.2NPO 1 3818 EMI SUPPRESSION FERRITE BEAD T&R 1 8801 6-32 X 3/8 PAN PH TAPTITE JS500 20
5273 __1N5 200V 5%CAP T&R RAD CER.2NPO 6 4597 22AWG STRAN TC WIR JMP 39 8747 6-32 X 1/2 HEX ND MS ZINC 1
5274 __2N2 200V 5%CAP T&R RAD CER.2NPO 6 4599 22AWG SOLID SC WIR T&R JMP 64 8835 6-32 X 1/2 PAN QUAD MS TIN PLATED 8
5275 __3N3 100V 5%CAP T&R RAD .2FLM 1 5299 24AWG SOLID SC WIR RAD JMP 1 8745 6-32 X 3/4 HEX ND MS ZINC 18
5603 __1N0 50V 5%CAP T&R RAD CER.2X7R 17 4745 5.0W 0R1 5% BLK RES 4 8838 6-32 X 1 HEX HD MS ZINC CLEAR 2
5816 680P 100V 5%CAP T&R RAD CER.2NPO 1 4694 5.0W 1R8 5% BLK RES 1 8785 #8 X 3/4 OVAL PH TYPE A BLACK OXIDE 32
5204 _10N 100V 10%CAP T&R RAD .2FLM 8 4703 2.0W 2R 5% T&R RES 4 8781 #10 X 7/8 FLAT QUAD TYPE A JS500BLK 2
5207 _18N 100V 5%CAP T&R RAD .2FLM 1 4666 1/2W 4R7 5% T&R RES 2 8843 10-32 X 1 1/8 FLAT QUAD MS JS500 2
5209 __4N7 250V 5%CAP T&R RAD .2FLM 2 2009 1/4W 10R 2%FLAME PROOF T&R RES 4 8773 10-32 X 1 1/4 PN PH TT FULL THD JS5 9
5222 _33N 100V 10%CAP T&R RAD .2FLM 2 4605 1/8W 10R 5% T&R RES 1 8740 5/16-18 X 3 GRD 5 HEX BOLT JS500 1
5224 _47N 100V 10%CAP T&R RAD .2FLM 2 4709 5.0W 22R 5% BLK RES 1 7766 _15P 50V 5%CAP 0603 SMT NPO 1
5302 _15N 50V 10%CAP T&R BEAD X7R 2 2014 1/8W 33R 2%FLAME PROOF T&R RES 1 7693 __1N 50V 5%CAP 0805 SMT NPO 2
5304 _22N 50V 10%CAP T&R BEAD X7R 2 4957 1/4W 47R 5% .2"U T&R RES 12 7966 __2N7 100V 10%CAP 0805 SMT X7R 2
5840 _22N 400V 10%CAP BLK RAD POLY FLM 1 2019 1/8W 100R0 1%FLAME PROOF T&R RES 2 7613 100N 25V 10%CAP 0805 SMT X7R 5
6435 _22N 275V 20%CAP BLK 'X2' 15MM AC 1 4852 1/4W 100R 5% T&R RES 9 7810 _47U 16V 20%CAP 6X5.4 SMT ELE 2
6451 __4N7 250V 20%CAP BLK 'Y' 10MM AC 1 4857 1/4W 220R 5% T&R RES 9 7786 CD4052B IC DUAL 4CHANNEL MUX SMT 1
5212 100N 63V 5%CAP T&R RAD .2FLM 18 4770 1/4W 249R 1% T&R RES 12 7912 FV-1 SPIN SEMI REVERB CHIP IC 1
5226 _68N 100V 5%CAP T&R RAD .2FLM 1 2027 1/4W 390R 5%FLAME PROOF T&R RES 2 7934-PROG 24LC32A SER EEPROM MIX2-U3 YS DFX 1
5228 100N 100V 5%CAP T&R RAD .2FLM 4 4950 1/4W 390R 5% .2"U T&R RES 4 7935-PROG 24LC32A SER EEPROM MIX2-U4 YS DFX 1
5229 150N 63V 10%CAP T&R RAD .2FLM 1 4821 1/4W 470R 5% T&R RES 1 7882 W063 0R 1% 1206 SMT RES 1
5230 180N 63V 5%CAP T&R RAD .2FLM 1 4933 1/4W 470R 5% .2"U T&R RES 1 7781 W063 49R9 1% 0603 SMT RES 1
5233 330N 63V 5%CAP T&R RAD .2FLM 1 4799 1/4W 562R 1% T&R RES 12 7624 0.1W 100R 1% 0805 SMT RES 1
5314 100N 50V 10%CAP T&R BEAD X7R 17 4891 1/4W 620R 5% T&R RES 2 7853 W250 100R 5% 1206 SMT RES 1
5240 680N 63V 10%CAP T&R RAD .2FLM 3 4922 1/4W 620R 5% .2"U T&R RES 6 7621 0.1W 1K0 1% 0805 SMT RES 4
5256 __1U 63V 5%CAP T&R RAD .2FLM 1 4873 1/4W 680R 5% T&R RES 1 7625 0.1W 10K0 1% 0805 SMT RES 5
5259 __4U7 63V 20%CAP T&R RAD .2 4 4923 1/4W 680R 5% .2"U T&R RES 1 7634 0.1W 20K5 1% 0805 SMT RES 2
7769 __1U 50V 20%CAP 4.3X3.9 SMT ELC 5 4924 1/4W 750R 5% .2"U T&R RES 1 7818 LM1117 REGULATOR 3V3 SOT-223 1
5260 _22U 50V 20%CAP T&R RAD .2EL 1 4925 1/4W 820R 5% .2"U T&R RES 1 7913 32KHZ CRYSTAL SMT 4-PIN FSRLF 1
5282 _10U 16V 20%CAP T&R 5X7MM .2NP 8 4892 1/4W 910R 5% T&R RES 1 7932 07 PIN 25SQ 100 PIN SMT SIL 1
5631 _22U 50V 20%CAP T&R 6X7MM .2EL 41 2032 1/4W 1K 2%FLAME PROOF T&R RES 1 7933 08 PIN 25SQ 100 PIN SMT SIL 1
5945 _10U 63V 20%CAP T&R RAD .2EL 1 4823 1/4W 1K 5% T&R RES 3 8663 11/64 NYLON SPACER (MICRO PLASTIC) 8
5961 _33U 16V 20%CAP T&R RAD .2 1 4981 1/4W 1K 5%MINI T&R RES 6 8656 .171 X 1/4 NYLON SPACER #SP42 2
5265 _68U 25V 20%CAP T&R RAD .2EL 1 4585 1/4W 1K2 5%MINI T&R RES 12 3739 CUSTOM .4 LED SPACER 1
5267 100U 25V 20%CAP T&R RAD .2EL 2 4718 5.0W 1K5 5% BLK RES 2 2335 NYLON STANDOFF NUT #4 500MIL 6
5621 470U 63V 20%CAP BLK 12X25MM EL 1 4824 1/4W 1K5 5% T&R RES 1 2342 NYLON STANDOFF NUT #4 530MIL BLK 3
5879 100U 16V 20%CAP T&R 8X7MM .2EL 12 4808 1/4W 2K 5% T&R RES 1 8482 3/8 1D FLAT WASHER 8
5897 330U 16V 20%CAP BLK 08X11MM EL 6 4847 1/4W 2K2 5% T&R RES 4 8818 3/4 OD X 3/8 ID X .080 THICK WASHER 2
5914 100U 63V 20%CAP BLK 10X13MM EL 2 4864 1/4W 2K7 5% T&R RES 1 8820 #8 FLAT WASHER JS500 5
5887 2200U 50V 20%CAP BLK 18X27MM EL 1 4826 1/4W 3K3 5% T&R RES 2 8817 #10 FLAT WASHER FOR 3/16" BOLT 9
5892 6800U 80V 10%CAP BLK 35X40MM ELS 2 4982 1/4W 4K7 5%MINI T&R RES 15 3436 DPDT PUSH SW PCMT H BREAK B4 MAKE 1
6578 ROT BIN 18MM 4BIT ENCODER P23 1 4639 1/4W 4K99 1% T&R RES 15 3587 DPDT ROKR SW QUIK 250"AC/PWR ON-OFF 1
4566 _10K B LIN 9MM P25 15 6128 1/4W 4K99 1%MINI MF T&R RES 22 3682 250 MALE PCB TAB REEL 12
4567 _20K 5C R/A 9MM P2
5
12 4978 1/4W 6K8 5%MINI T&R RES 2 CH1251 MP6D,MP-10DS POWER TRFMR T'RD 1
100u
25V
C25
100u
25V
C26
15n
C16
3K3
R26
1K
R22
150n
C14
3K3
R23
22K
R27
22K
R24
150p
C11
1/2
TLO72
U1
6
5
7
1/2
TLO72
U1
2
3
1
WC2
15K
R25
1N4004
D7
22n250V
C34
IN
REF
OUT
7915Q2
2
1
3
IN
REF
OUT
7815Q1
1
2
3
IN
REF
OUT
7805Q22
1
2
3
470U
63V
C4
100V
100N
C6
100V
100N
C8
27K
R43
2200U
50V
C3
TP
1N4004
D1
1N4004
D2
10K
R21
2N5401
Q6
D14
SW1
6A
F1
6A2
D4
680n
C10
680n250V
C34.
6A2
D5
1/2
TLO72
U2
2
3
1
10K
R60
910R
R38
16V
500mW
D33
1K
R41
MJ21195
6910
Q15
1K5
5W
R39
BAV21
D21
33R
R11
1K5
5W
R42
0R1
5W
R54
0R1
5W
R52
0R1
5W
R53
1N4004
D20
0R1
5W
R51
BAV21
D13
FP
10R
R2
WC4
2R
2W
R5
1K
R44
1N4004
D19
BC560
Q9
BC550
Q8
20K
R45
20K
R49
18K
R47
18K
R48
100R
R67
MJ21196
6909
Q14
22n
C30
2K2
R37
D10
MJF15031
Q10
MJF15030
Q11
MJ21195
6910
Q13
10R
R63
MJ21196
6909
Q12
BC550
Q3
BC550
Q4
D9
D15
2K
R31
100R
R46
4u7
25V
C36
100R
R50
16V
500mW
D30
D11
22n
C29
T3,15AH
D18
10K
R59
CW
LIN
470R
R74
4K7
R36
D17
D16
D12
4.7V
1N750A
D29
10K
R20
100n
C15
47K
R10
10K
R12
330K
R40
68U
16V
C12
470R
R17
4V7
1N750A
D32
4V7
IN750A
D31
20K
R13
1K
R14
22K
R15
680R
R18
150K
R16
DIAC
MBS4992
8V
Q19
100n
C21
2K7
R58
SHEET OF
NAME: PCB#&VER:
MODELS: SCH VERSION:
TITLE:
DATE: 1.90
325W_PWR-AMP
APR/27/06
M1181.SCH
325WATT
POWER-AMP
M1181
5uH
L1
1R8
5W
R57
100K
R19
2R
2W
R4
100n
C22
MT1
MT2
G
BT139
Q18
6800u
80V
C1
6800u
80V
C2
100n
C23
39K
R32
10K
R33
390RFP
R30
390RFP
R29
1K
R28
15p
C18
15n
C19
150p
C20
1KFP
R35
SRT
OUT-A
NO-GOLD
JB11
2
3
4
5
6
SRT
OUT-A
NO-GOLD
JB21
2
3
4
5
6
100n
C24
10U
63V
C9
1/2
TLO72
U2
6
5
7
22K
R1
22U
50V
C40
6A2
D6
6A2
D3
10K
R73
2K2
R61
BC560
Q20
100n
C31
D22
10R
R62
WC1
EY8
BC550
Q5
22K
R75
22K
R71
4u7
63V
C7
2
MJE15030
MJE15031
ECB
1
1N4004
D8
7805
7815
ORI
1N4004
D34
100V
100N
C5
D27
22n
C33
4R7
0.5W
R70
4R7
0.5W
R69
10
9
8
7
6
5
4
3
2
1
# DESCRIPTION OF CHANGEVER#DATE
MODEL(S):-
Q13,Q15_#6927->#6910
PC#7106_Q12,Q14_#6900->#69091.90APR/27/0612
SEP/29/03
AUG/14/03
MAY/29/01
.
JAN/15/01
.
NOV/15/00
JUN/01/00
MAY/18/00
JAN/25/00
1.70
1.60
1.50
.
1.40
.
1.30
1.20
1.10
1.00
PC#6628_C37_1u/63V->4u7/63V
PC#6623_ADD_D36_BAT85
PC#6380_ADD_C42-R81
CE_FUSE_T3A->T3,15AH
CE_XFMR_BUILT_IN_BREAKER_#1251FE
CORRECTION_R55-R31
PC#6306_U1_MUST_BE_TEXAS_INSTRUMENT
R65_470K->220K
CORRECTIONS
MADE_FROM_M1107_FOR_6CHANNEL_BOX_MX
325WATT_POWER_AMP
M1181.SCH_DATABASE_HISTORY
R22->1K,R25->15K,C10/C41->680N
PC#6467_R15->22K,R17->470R,R80->2K7
PC#6466_R72_NSL-28A->NSL-325R21.80NOV/06/01
11
NSL325R2
R72
4n7250V
C35
OUT
IN
SW2
16V
10U
C27
MC1 7
MPS4991
T2
NC
T1
TO_FRONT_PANEL
MC1 5
MC1 6
MC1 12
MC1 11
MC1 8
MC1 9
MC1 10
43V
IN5260B
D37
BDX53C
Q21
BC550C
CBE
BC560C
VIEW
BOTTOM
MJ21195
E
MJ21196
4n7
250V
C35-
BT139
G
MT1
MT2
MPSA06
EBC
.
22R
5W
R8
MPSA06
Q7
4u7
63V
C32
2R
2W
R6
2R
2W
R7
1N4004
D35
120VAC
60Hz
XXXVA
PT#1251
120VAC
60Hz
XXXVA
BC550
Q16
BDX53C
ECB
680n
C41
2K7
R80
63V
4u7
C37
NC
COM
NO
K1
1
3
4
6
C+
C-
K1
2
5
1N4004
D24
1N4004
D25
10R
R55
220K
R65
47K
R56
D23
33u
C17
4K7
R34
.
7915
OIR
100K
R81
INTERNAL
10u16V
C42
BAT85
D36
+15V
+15V
+15V
+15V
U2.V-
U2.V-
+28V
AMP-OUT
AC_WHITE
ASIG
IG IG
AREF
+40VPS
DIGND
DIGND
AC_BLACK
U2.V+
U2.V+
U_GND
PSGND
+5VIN
+5VIN
-15V
-15V
-15V
LVGND
LVGND
LVGND
LVGND
LVGND
LVGND
LVGND
LVGND
LVGND
LVGND
LVGND
LVGND
LVGND
LVGND
LVGND
LVGND
LVGND
LVGND
LVGND
LVGND
PT#1251FE
TL072
TEXAS INSTRUMENT
U1 MUST BE A
230V/245VAC
VA
0V
245V
230V
MC1->4 NC
YEL
YEL
GRY
RED
RED
RED
RED
GRY
GRY
GRY
BRN
BLK/BRN
BLUE
POWER SUPPLY
NORTH AMERICAN
EXPORT POWER SUPPLY
CHASS GND
BLACK
BLACK
+71V
+71V
-71V
-71V
+71V
+71V
-71V
TP1 AND TP2
NOTE:ADJUST RT1 FOR 3mV BETWEEN
TEST POINT
NOTES:
ON PCB BREAKAWAY.
PHANTOM POWER PARTS ARE LOCATED
BREAKAWAY PCB
BYPASS CAPS
ALL UNMARKED DIODES ARE IN4148
TO PIN 4 OF U2
TO PIN 4 OF U1
TO PIN 8 OF U1
TO PIN 8 OF U2
POWER ON
CHASSIS GND
FENDER
BACK PANEL
JACKS ON
WITH OUTPUT
B
.020"
.012"
.008"
.005"
VCD
.020"
.012"
.008"
.005"
SHEARSHEAR
SHEAR SHEAR
SHEAR SHEAR
M1181-5.20
SOLDERSIDE M1181-5.20
BLANK SIZE=13.600"X8.000"
2OZ COPPER
SFLDLAYER M1181-3.30
C26
100U
25V
J55
C36
63V
4u7
R8
22R
5WATT
D25
4007
WC1
WC2
TAB5
NEUTRAL
J2
Q5
BC550
Q9
BC560
Q8
BC550
Q3
BC550
Q4
BC550
J46
C16
15N
C11150P
R19
100K
C7
63V
4u7
C27
16V
10U
C21100N
C22100N
C23100N
C1815P
C1915N
C20
150P
C24100N
R263K3
R233K3
R2722K
R2422K
R22
1K
C5
100n
C6 100n
TAB8
RED_PRIM
TAB7
RED_PRIM
R21
10K
R71
22K
R38
910R
R411K
R44 1K
R45
20K
R49
20K
R47
18K
R48
18K
R312K
R46
100R
R36 4K7
R20
10K
R10 47K
R30
390R
J5
BE
Q21
BDX53C
PHANTOM_POWER
WC7
D29
4V7
R18
680R
R16 150K
R58
27K
R3239K
R3310K
R351K
R40
330K
R281K
C37
4U7
63V
U1
TLO72
R67
100R
R7
2W
2R
D2
1N4007
R13
20K
D20
1N4007
BE
Q2
7915
-15V
BE
Q10
MJE15031
BE
Q11
MJE15030
TAB4
NEUTRAL
R6
2W
2R
R4
2W
2R
R42
1K5
5WATT
D33
16V
D30
16V
J51
D32
4V7
D31
4V7
R5
2W
2R
PART#5892
6800u
80V
Q6
2N5401
D10
4148
D21
BAV21
TJH1
J44
D9
4148
D15
4148
D11
4148
D18
4148
D17
4148
D16
4148
D12
4148
BAR DOWN
D4
6A2
BAR DOWN
D5
6A2
BAR DOWN
D6
6A2
BAR DOWN
D3
6A2
TAB6
HOT
D7
4007
TAB3
YELLOW_CETER
U2
TLO72
J1
BE
Q1
7815
+15V
R39
1K5
5WATT
L1
5uH
C35
4N7
250V
D1
1N4007
R43 27K
R29
390R
R63
10R
C10
680N
C34
SEE
FOR
D27
4148
R34
4K7
TAB2
GREY_PRIM
TAB1
GREY_PRIM
R57
1R8
5WATT
R62 10R
R74
470R
VBE
J37
Q18
#6470
TRIAC
Q6016LH4
DC-PRT
D8
4007
C41 680N
JB1
OUTPUT
JB2
OUTPUT
C40
22U
50V
R1
22K
TJH2
Q15
MJ21195
PNP_#6910
NOTES
VALUE
C30
22N
J57
J34
J29
D14
4148
V
T
R
V
T
R
C2
PART#5892
6800u
80V
D35
4007
J42
WC2.
YEL-16"
WC4
BLU
J49
J17
J33
J3
GUIDE
ETCH
J31
M1181
BOX_MIXER
VER-5.10
J32
J36
D34
4007
J35
J23
J22
J25
J24
J30
R60 10K
J21
J18
R59 10K
C29
22N
C4
470U
63V
J28
J11
R51
0R10
5WATT
R52
0R10
5WATT
Q13
PNP_#6910
MJ21195
J7
R53
0R10
5WATT
R54
0R10
5WATT
J9J8
Q12
MJ21196
NPN_#6909
R14
1K
Q14
MJ21196
NPN_#6909
R61
2K2
D22
4148
C31100N
Q20
BC560
J16
J15
J14
J13
J12
D234148
R802K7
J20
D37
43V
C25
100U
25V
V
T
R
D19
1N4007
C12
68U
16V
C17
33U
16V
J19
J56
J10
WC1.
BLK-16"
J26
Q19
MBS4992
J27
R17
470R
J6
R15
22K
C14
150N
V
T
R
C9
10U
63V
R70
4R7
0.5W
R69
4R7
0.5W
C33
22N
400V
J4
C32
63V
4u7
C15
100N
GUIDE
ETCH
Q16
BC550
R72
NSL
325R2
V
T
R
R56
47K
FRONT-GND
R1133R
J48
J40
C3
#5887
50V
2200U
D13
BAV21
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
# DESCRIPTION OF CHANGEVER#DATE
# DESCRIPTION OF CHANGEVER#DATE
MODEL(S):-
M1181.PCB_DATABASE_HISTORY
325_WATT_MP6D_MIXER
MADE_FROM_M1107.ADDED_ANOTHER_POLE
TO_U1_HIGHPASS,MOVED_5V_REGULATOR,
MADE_PHANTOM_POWER_48V.MADE_FOR_FEN
R65_470K->220K
N
PC#_____REMOVE_J60
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
PC#6306_U1_#6882->6882TI
PC#6380_ADD_C42-R81
PC#6466_R72_NSL-28A->NSL-325R2
PC#6467_R15_1K->22K_R17_1K->470R
R80_10K->2K7_R22_10K->1K_R25_47K->
15K_C10,C41_150N->680N
PC#6585_ENLARGE_TRACE_4_TABS_@_Q21
PC#6610_Q18_BT139_Q6016LH4
PC#6623_ADD_R36_TACKED_ON_WITH_R37
PC#6628_C37_1u/63V->4u7/63V
REDO SOLDERMASK
PC#7049 TRIM TRACE AWAY FROM TEST POINT AT
R73
PC#7106 Q12,Q14 TO #6909. Q13,Q15 TO #6910
REVISED PER PC#7215
N
N
1.00
V
.
.
..
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
1.10
1.20
2.00
2.10
.
.
.
3.00
3.10
3.20
3.30
4.00
5.00
.
5.10
5.20
V
V
JAN/20/00
D
.
JUN/12/00
.
.
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
.
JUL/17/00
NOV/15/00
MAY/29/01
NOV/06/01
.
.
.
JAN/29/03
APR/28/03
AUG/14/03
SEP/29/03
APR/20/05
DEC/02/05
.
APR/27/06
MAR/25/09
D
D
R75
22K
R12
10K
V
T
R
J62
EY8
16AWG
SW1
PHANTOM
#3436
J50
Q7
MPSA06
C8
100n
1
MC1
TO_FRONT_PANEL
J64
J41
NC
NO
-
+
K1
RELAY
SPDT
J63
DUMMY
TJH3
R65220K
R50
100R
J59
J58
R73
10K-THERM
R5510R
J65
D24
4007
R81
100K
J61
BE
Q22
7805
+5V
R2 10R
C42
16V
10u
R25
15K
ASSEMBLY M1181-5.20
INSERTED AS SHOWN
R37 AND D36 ARE SOLDERED TOGETHER AND HAND
5
INSTRUMENT
TEXAS
U1 MUST BE A
U1 MUST BE #6882TI TEXAS INSTRUMENT TLO72
4
FASTEN YELLOW WIRE WITH A TIE HERE
DO NOT CUT
BEND LEADS
D3,D4,D5,D6 BEND OVER AND SOLDER
DO NOT CUT THE WIRE LEADS FROM DIODES
METAL
TO CHASSIS
BLANK SIZE=13.600"X8.000"
HAND INSERTED
WITH THICK GOOP
FOR Q7 FILL HOLE IN THE HEAT SPREADER
3
.
BLUE 12"
GRN 6"
C34 680N PT#5266 CAP FOR EXPORT
22N PT#6435 FOR NORTH AMERICA
2
1
PRODUCTION NOTES
BLK
TO AC SW
IS
R18
NOTE
-+
M171
LAY FLAT
VERTICALLY
MOUNT
HEATSPREADER
CAUTION
TYPE 2R0 2WATT RESISTORS
REPLACE R4,R5,R6,R7 WITH SAME
#3696
2 OZ. COPPER
GRN 11"
16AWG
16"
YELL
BLK 16"
D36
D36
BAT85
BAT85
2K2 R37
2K2 R37
PCBMECH M1181-5.20
P:\1181CMP.PRN
10K0
R121
33K
R77
33K
R80
10K0
R120
10K
R71
LR
USE
RCA
50V
1N0
C26G
22U
50V
C54G
22U
50V
C55G
L-BDY
4K99
R267G
4K99
R102G
4K99
R103G
100u
35V
C56G
1K5
R73
33K
R29
(4=V-,8V+)
1/2
33078
U15G
6
5
7
L-BDY
562R
R268G
100V
10N
C29C
1/4
33079P
U4
6
5
7
4148
D11
100n
C63
1K2
R123C
10K
R99
22u
35V
C36
15V
10U
C101C
33K
R121C
18K
R120C
100n
C34
50V
1N0
C28G
82K
R118C
LR
TAPE_OUT
RCAJB9
100n
C98C
100n
C97C
100n
C96C
100n
C95C
100n
C94C
100n
C93C
50V
1N0
C28C
CW
B
10K
EFX
P15C
BEAD
100V 100N
C27C
10K
R98
47R
R224C
50V
1N0
C76C
18K
R117C
82K
R116C
100R
R115C
1K
R114C
220R
R113C
50V
1N0
C76G
L-BDY
4K99
R274C
L-BDY
4K99
R273C
L-BDY
249R
R272C
L-BDY
249R
R271C
L-BDY
4K99
R270C
4K7
R112C
4K7
R111C
50V
1N5
C71C
33K
R110C
1K
R114G
47K
R106C
L-BDY
4K99
R274G
L-BDY
4K99
R273G
CW
MONITOR
20K
05C P14C
CW
GAIN
20K
05C P13C
CW
BASS
50K
1B P12C
CW
TREBLE
10K
1B P11C
L-BDY
249R
R272G
1/4
TL074
U18C
9
10
8
1/4
TL074
U18C
13
12
14
L-BDY
249R
R271G
INPUT
MIC
JB1C
1
3
2
4M7
R223C
L-BDY
562R
R269C
L-BDY
562R
R268C
(4=V-,8V+)
1/2
TLO72
U16C
2
3
1
(4=V-,8V+)
1/2
33078
U15C
6
5
7
100u
35V
C56C
L-BDY
4K99
R270G
1/4
33079P
U4
2
3
1
620R
R111
MC3 2
33K
R79
1/4
MC4741CP
U7
9
10
8
6K8
R23
PHANTOM
ORANGE
LD5
47p
C7
22u35V
C6
10K
R69
10K
R108
CLIP
RED
MON_CLIP
LD4
INPUT
MIC
JB1G
1
3
2
4148
D50
330U16V
C70C
10R
R26
220R
R78
1/4
MC4741CP
U7
6
5
7
TO_POWER_AMP
MC3 1
4148
D10
CLIP
RED
MAIN_CLIP
LD3
620R
R93
.
3V0
D51
4148
D1
22u
35V
C100
100n
C27
6K98
R63
20K0
R64
20K0
R65
6K98
R66
33K
R200
45K3
R62
220R
R76
6K98
R61
10K0
R97
10K0
R122
1/2
TLO72
U9
2
3
1
47P
C68
10K0
R118
6K98
R60
10K0
R119
620R
R30
1/2
TLO72
U9
6
5
7
620R
R31
45K3
R59
1/4
TLO74
U7
13
12
14
470K
R5
100n
C26
100n
C41
L-BDY
562R
R269G
33K
R104C
4K99
R103C
4K99
R102C
L-BDY
4K99
R267C
22U
50V
C55C
1K
R27
1K
R110
47P
C67
22U
50V
C54C
CW
MAIN_LVL
10K
1B P7
4148
D2C
4148
D1C
MC3 12
MC3 11
MC3 10
CW
MONITOR_LVL
10K
1B P8
22u35V
C8
47p
C9
6K8
R22
620R
R85
22u35V
C23
47p
C24
1/4
MC4741CP
U7
2
3
1
MC3 9
MC3 8
620R
R112
MC3 7
13K
R217C
100n
C42
CW
MON_EFX
1B
50K
P10
RED
CLIP
LD1C
CW
MAIN_EFX
1B
50K
P9
MC3 6
18K
R55
MC3 5
18K
R56
22u
35V
C35
POWER
GRN
LD2
MC3 4
MC3 3
1/4
33079P
U4
9
10
8
C45
100N
16V
C50
68N
"P33"
STYLE
MPSA06
Q2
250Hz
1B
20K
P15
125Hz
1B
20K
P14
1KHz
1B
20K
P17
16KHz
1B
20K
P21
63Hz
1B
20K
P13
8KHz
1B
20K
P20
4KHz
1B
20K
P19
500Hz
1B
20K
P16
2KHz
1B
20K
P18
PCB#:YORKVILLE NAME:
MODELS: SCH ISSUE:
TITLE:
DATE:
M1108
MP-6D
BOX-MIXER
M1108.SCH
OCT/27/2003
MIXER/EQ/MASTER
1.70
MPSA06
Q1
MPSA06
Q3C
RING
1/4"_VERTICAL
MON_OUT
JB7
C61
180N
RING
1/4"_VERTICAL
AMP_A_IN
JB6
1B_30mm
STYLE
C46
100N
RING
1/4"_VERTICAL
MAIN_OUT
JB5
100U
25V
RING
1/4"_VERTICAL
EXF-SND
JB3
50V
1N0
C103
1/4
TL074
U5
6
5
7
C62
1U
1/4
TL074
U6
9
10
8
1/4
TL074
U6
6
5
7
1/4
TL074
U6
13
12
14
1/4
TL074
U6
2
3
1
1/4
TL074
U5
9
10
8
1/4
TL074
U5
2
3
1
1/4
TL074
U5
13
12
14
1/4
33079P
U4
13
12
14
10
9
8
7
6
5
4
3
2
1
# DESCRIPTION OF CHANGEVER#DATE
MODEL(S):-
D
OCT/27/03
.
FEB/14/01
.
.
MAR/30/00
MAR/30/00
NOV/15/99
APR/07/99
V
1.70
.
1.60
.
.
1.50
1.40
1.30
1.20
N
PC#6649_Q1,Q2,Q3C-H_MPSA13->MPSA06
1N5/200V->1N/50V
PC#6309_C76C/G,C28C/G,C26C/G,C103
R102G/R103G_4K7->4K99
R108_4K7->10K_R102C/R103C_4K7->4K99
PC#6223_C70C_330u/25V->330u/16V
PC#6229_FIX_ERROR_R123->P9
PC#5987_R119C_1K->100K
PC#5980_RING_AMP_IN_JACK_TO_GND
MP6D
.
56K
R57
82K
R58
47K
R67
47K
R68
82K
R70
100V
10N
BEAD
R293
100n
C64
8K2
R20
100R
R19
4K7
R24
390R
R72
C58
680P
BEAD
10
9
8
7
6
5
4
3
2
1
# DESCRIPTION OF CHANGEVER#DATE
MODEL(S):-
MAR/22/99
DEC/22/99
.
APR/09/98
MAR/04/97
97/01/09
96/10/03
96/09/26
96/09/17
96/09/04
1.10
1.00
.
1.40
1.30
1.20
1.11
.
1.10
1.00
PC#5952_ADD_R123_C69_EFF->REC_OUT
NEW_MP6D_WITH_DIGITAL_EFX
4741->TL074
PC#5683_U4_4741->33079P_U5,U6,U18A
PC#5318_ADD_1K_(R119A)
CHANGES_FOR_NOISE_REDUCTION_SEE_DX
CHG_D51,6V2-->3V0-DEL_R115,R206
ADDED_R205-620R_TO_FXSEND_JACK
CUT_GAIN_TO_LIMIT_FX_TO_6V
NEW
MP6D
M1108.SCH_DATABASE_HISTORY
C59
680N
C60
330N
"P25"
STYLE
AS_OFKNOBPART#FUNCTIONREF
10
9
8
7
6
5
4
3
2
1
#
MODEL(S):-
.
.
.
.
.
.
.
.
.
JAN/2000
.
#8394
#8392
#8395
#8395
#8395
#8393
#8393
#8394
#8392
#3999
#4566
#4566
#4568
#4568
#4566
#4566
#4568
#4567
#4567
EQ_SLIDE
MONITOR
MAIN
EFX_MONITOR
EFX_MAIN
CHAN_EFX_SND
CHAN_TREBLE
CHAN_BASS
CHAN_MONITOR
CHAN_GAIN
P13-P21
P8
P7
P10
P9
P15C-H
P11C-H
P12C-H
P14C-H
P13C-H
MP6D
M1108.PCB_POT_LIST
10N
C18
47N
C48
4N7
C21
33N
C52
P11
123456
470p
C69
13K
R123
100K
R119C
22u
35V
C57
1N753A
6V2
D13
470R
R82
820R
R84
390R
R86
100K
R87
390R
R88
620R
R89
100K
R90
47K
R91
680R
R92
390R
R94
56K
R95
750R
R96
TIP
RING
1/4"VERTICAL
LINE_IN
JB2C
1K2
R101C
50V
1N0
C26C
47R
R222C
10N
C44
100p
C22
1N
C19
4N7
C47
18N
C49
3N3
C51
33N
C53
18
20
19
17
15
16
14
13
12
11
D
D
D
D
D
D
D
D
D
.
K
K
K
K
K
K
K
K
K
#8397
N
N
N
N
N
N
N
N
N
#4583
F
F
F
F
F
F
F
F
F
EFX_ENCODER
D
D
D
D
D
D
D
D
D
P11
100N
C101
620R
R205
100U
16V
C52C
100U 16V
C53C
4K99
R203
47N
C102
10K
R202
-15V
-15V
-15V
MONBUSS+ MONBUSS+
MON_OUT-
EFXBUSS-
EFXBUSS-
EFXBUSS-
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
LED+15
BIT4
BIT5
BIT7
BIT3
DIGND
DIGND
AREF
ART_OUT
ART_GNDI
ART_IN
ART_GNDO
ASIG
+24VPS
DIGNDPS
DIGNDPS
DIGNDPS
LVGND
LVGND
LVGND
LVGND
LVGND
LVGND
LVGND
LVGND
LVGND
+5VPS
+5VPS
+5VPS
BIT6
MAINBSS-
MAINBSS-
LED_COM2
LED_COM2
+5V
+40V
+15V
+15V
+15V
+15V
+15V
+15V
LEDCOM
+24V
+24V
+24V
IG
IG
IG
IG
IG
IG
IG
IG
MON_CLP
MON_CLP
THERE WILL NOT BE A U12D.
NUMBERED CHANNEL. i.e. IF U12C
WITH SUFFIXES 'D'-'H'. ANY
'C' WILL EXIST IN CHANNELS 2-6
CHANNELS 5 AND 6
CHANNELS 1 TO 4
IS SHARED BY CHANNELS '1' AND '2',
MOST PARTS IN CHANNEL 1 WITH SUFFIX
SUFFIX BELONGING TO THE LOWER
ADJACENT CHANNELS WILL HAVE THE
PARTS WHICH ARE SHARED BY
NOTE - REFERENCE DESIGNATORS
ONE PAIR OF BYPASS CAPS ARE LOCATED WITH EACH I.C.
INPUTS
TO DIGITAL EFFECTS
9 BANDS
MAIN EQ
ALL UNMARKED DIODES ARE IN4148
TO M1010 SHEET5
U:\M1108V17.PRN
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Yorkville Sound MP6D2 User manual

Yorkville Sound
Brand
Yorkville Sound
Model
MP6D2
Category
DJ controllers
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents