Bosch KIR24V21 & KIR24V20GB Owner's manual

Page is loading ...

16

en Table of contents

Safety instructions ............................................. 17

Directions for disposal ..................................... 18

Specifications supplied .................................... 18

Installing the appliance .................................... 18

Connecting the appliance ................................ 19

Changing the door hinge ................................. 20

Getting to know the appliance ........................ 22

Switching on the appliance ............................. 22

Setting the temperature .................................... 23

Usable capacity ................................................. 23

Fridge compartment ......................................... 23

Freezer compartment ....................................... 23

Freezing capacity .............................................. 24

Freezing and storing ......................................... 24

Freezing fresh food ........................................... 24

Defrosting frozen food ...................................... 24

Fittings ................................................................. 25

Switching off and shutting down

the appliance ..................................................... 26

Defrosting ........................................................... 26

Cleaning the appliance .................................... 27

Smells .................................................................. 27

Lighting (LED) .................................................... 27

Saving energy .................................................... 27

Operation noises ............................................... 27

Rectifying minor faults yourself ....................... 28

After-sales Service ............................................ 29

en

17

Safety instructions

This appliance complies with the relevant safety

regulations for electrical appliances and is fitted with

noise suppression.

The refrigeration circuit has been checked for leaks.

About these instructions

■ Read and follow the instructions for installation and

use. They contain important information on how to

install, use and maintain the appliance.

■ The manufacturer is not liable if you disregard the

notifications and warnings in the operating and

installation instructions.

■ Retain all documents for subsequent use or for the

next owner.

Risk of explosion

■ Never use electric appliances inside the appliance

(e.g. heaters or electric ice makers).

■ Do not store products which contain flammable

propellant (e.g. spray cans) or explosive substances

in the appliance.

■ Keep high-percentage alcohol tightly sealed and

store in an upright position.

■ Do not use additional means to accelerate the

defrosting process other than those recommended

by the manufacturer.

Risk of electric shock

Improper installations and repairs may put the user at

considerable risk.

■ When installing the appliance, ensure that the mains

cable is not trapped or damaged.

■ If the mains cable is damaged: immediately

disconnect the appliance from the electricity supply.

■ Do not use multi-outlet power strips, extension leads

or adapters.

■ Have the appliance repaired by the manufacturer,

Customer Service or a similarly qualified person only.

■ Use original parts supplied by the manufacturer only.

The manufacturer guarantees that these parts satisfy

the safety requirements.

Risk of cold burns

■ Never put frozen food straight from the freezer

compartment into your mouth.

■ Avoid prolonged contact between your skin and

frozen food, ice and the tubes in the freezer

compartment.

Risk of injury

Containers which contain carbonated beverages may

burst.

Do not store containers which contain carbonated

beverages in the freezer compartment.

Fire hazard/Danger due to

refrigerants

The tubes of the refrigeration circuit convey a small

quantity of an environmentally friendly but flammable

refrigerant (R600a). It does not damage the ozone

layer and does not contribute to the greenhouse effect.

If refrigerant escapes, it may injure your eyes or ignite.

■ Do not damage the tubes.

If the tubes are damaged:

■ Keep naked flames and ignition sources away from

the appliance.

■ Ventilate the room.

■ Switch off the appliance and pull out the mains plug.

■ Please contact Customer Service.

Fire hazard

Portable multi-outlet power strips or power supplies

may overheat, causing a fire.

Never leave portable multi-outlet power strips or

portable power supplies behind the appliance.

Avoiding placing children and vulnerable

people at risk

At risk here are:

■ Children,

■ People with limited physical, mental or sensory

abilities,

■ People who have inadequate knowledge concerning

safe operation of the appliance.

Measures:

■ Ensure that children and vulnerable people have

understood the hazards.

■ A person responsible for safety must supervise or

instruct children and vulnerable people who using

the appliance.

■ Only children aged 8 years and above may use the

appliance.

■ Supervise children who are cleaning and maintaining

the appliance.

■ Never allow children to play with the appliance.

Risk of suffocation

■ If the appliance features a lock: keep the key out of

the reach of children.

■ Keep children away from the packaging and its

parts.

Damage to property

To prevent damage to property:

■ Do not stand or support yourself on the base,

runners or doors.

■ Keep plastic parts and door seals free of oil and

grease.

■ Pull on the mains plug – not the power cord.

en

18

Weight

When installing and transporting the appliance, note

that it may be very heavy.

Intended use

Use this appliance

■ Only for the cooling and freezing of food and for

making ice.

■ Only in the home and in the home environment.

■ Only according to this user manual.

This appliance is intended for use up to a maximum

height of 2000 metres above sea level.

Directions for disposal

* Disposing of packaging

The packaging protects your appliance from damage

during transport. All the materials used are

environmentally friendly and can be recycled. Please

help by disposing of the packaging in an

environmentally responsible manner.

Information about the available disposal methods and

sites can be obtained from your appliance retailer or

your local authority.

* Disposing of your old appliance

Used appliances are not valueless waste. Valuable raw

materials can be recovered through environmentally

responsible disposal.

m Warning

Appliances at the end of their useful life:

1. Unplug the mains plug.

2. Cut the power cord and remove it along with the

mains plug.

3. Do not remove the shelves and containers. Leaving

them intact makes it more difficult for children to

climb in.

4. Never let children play with a disused appliance.

Risk of asphyxiation!

Refrigerators contain refrigerant as well as gases in the

insulation material. Refrigerant and gases must be

disposed of properly. Do not damage the refrigerant

circuit pipes before disposing of them properly.

Specifications supplied

After unpacking the appliance, check all parts for

transport damage.

If you find any defects, contact the retailer from whom

you purchased the appliance or our After-sales Service.

The appliance supplied consists of the following

components:

■ Free-standing appliance

■ Features (vary depending on the model)

■ Bag of assembly materials

■ Instructions for use and installation

■ Service record

■ Guarantee slip

■ Information on energy consumption and noise

Installing the appliance

Transport

Because of the weight and size of the appliance, and in

order to minimise the risk of personal injury or damage

to the appliance, at least two persons are required for

moving and positioning the appliance safely.

Installation site

The ideal installation site is a dry, well ventilated room.

The appliance should not be installed in a position that

is exposed to direct sunlight or close to a source of

heat, such as a cooker or radiator. If installation near to

a source of heat is unavoidable, use a suitable

insulating panel or keep to the following minimum

distances from the source of heat:

■ 3 cm from an electric or gas cooker.

■ 30 cm from oil or solid fuel cookers.

Floor surface

The floor at the installation site must not give. Reinforce

the floor if necessary.

This appliance is labelled in accordance with

European Directive 2012/19/EU concerning

used electrical and electronic appliances (waste

electrical and electronic equipment - WEEE).

The Directive determines the framework for the

return and recycling of used appliances as

applicable throughout the EU.



en

19

Wall clearance

If the appliance is positioned in the corner of a room or

a recess, minimum clearances at the sides must be

maintained so that the heated air is able to escape

unimpeded and the appliance door can be fully

opened.

Observe the room temperature and

ventilation requirements

Room temperature

The appliance is designed for a certain climate class.

Depending on the climate class, the appliance can be

operated at the following ambient temperatures.

The climate class is specified on the rating plate.

Note

The appliance is fully functional within the room

temperature limits of the specified climate class. If an

appliance in the SN climate class is operated at lower

ambient temperatures, damage to the appliance can be

excluded up to a temperature of +5 °C.

Ventilation

The heated air must be able to escape unimpeded.

Otherwise, the refrigerating unit has to work harder,

which increases the appliance's power consumption.

Therefore:

■ Never cover over or block the air vent.

■ Keep minimum distances to walls and furniture.

Connecting the appliance

After setting up the appliance, wait for at least 4 hours

before starting the appliance up. The oil contained in

the compressor may have been displaced into the

refrigeration system during transport.

Before starting the appliance up for the first time, clean

its interior (see section headed Cleaning the

appliance).

Do not remove the transit locks from the shelves and

trays until the appliance has been installed.

Electrical connection

The socket must be near to the appliance and easily

accessible after the appliance has been installed.

The appliance conforms to protection class I. Connect

the appliance to a 220-240 V/50 Hz alternating current

supply using a socket with protective earthing

conductor which has been correctly installed. The

socket must be protected by a fuse with a rating of

10 A to 16 A.

In the case of appliances operated outside of Europe,

check whether the voltage and type of current specified

conform to the values of your electricity grid. You will

find this information on the rating plate.

m Warning

The appliance must never be connected up to an

electronic energy-saving socket.

Sinusoidal-commutated and line-commutated inverters

can be used with our appliances. Line-commutated

inverters are used with photovoltaic systems that are

connected directly to the national grid. Sinusoidal-

communicated inverters must be used with standalone

applications (e.g. on ships or mountain huts) that do

not have a direct connection to the national grid.

Climate class Permissible room temperature

SN +10 °C to 32 °C

N +16 °C to 32 °C

ST +16 °C to 38 °C

T +16 °C to 43 °C

en

20

Aligning the appliance

Note

To ensure that it functions properly, the appliance must

be aligned using a spirit level.

1. Move the appliance into its intended installation

position.

2. Screw the feet in/out until the appliance is exactly

aligned.

Changing the door hinge

We recommend to have the door hinge changed by our

customer service. How much a door hinge change will

cost you can find out contacting customer service.

m Warning

When the door hinge is changed, the appliance must

not be connected to the power supply. Please pull the

mains plug beforehand.

Required tools

Changing door hinge of the appliance

door

1. Open the appliance door and unhinge and remove

all fittings from inside the appliance (see section

headed Fittings).

2. Unscrew the 2 screws (1).

3. Take off the cover plate (2) and set it down on a

soft surface.

Hold on to the appliance door!

4. Unscrew the 2 screws (3).

5. Unscrew the 2 screws (4).

6. Remove the top hinge (5).

7. Unhook the appliance door and set it down on a

soft surface.

8. To avoid damaging the appliance rear side, provide

cushioning material. Place the appliance carefully

onto its rear side.

8 mm hex nut driver

Cross-shaped screwdriver

Thin-blade screwdriver

en

21

9. Unscrew the feet (6).

10. Unscrew the 3 screws (7).

11. Remove the bottom hinge (8).

12. Unscrew the nut (9) and pull out the bolt (10).

13. Insert the bolt (10) into the left boring and apply the

nut (9) and tighten.

14. Apply the bottom hinge (8) and apply 3 the

screws (7) and tighten.

15. Screw the feet (6) into the bottom hinge (8).

16. Attach the appliance door to the bottom hinge (8).

17. Apply the 2 screws (4) and tighten.

18. Apply the top hinge (5) and apply the 2 screws (3)

and tighten.

19. Turn the appliance upright again.

20. Mount the cover panel (2) at the front and lay it flat

on the rear.

21. Apply the 2 screws (1) and tighten.

22. Open the appliance doors and attach all fittings

(see section headed Fittings).

Changing the door hinge of the freezer

compartment door

1. Hold on to the freezer compartment door and

unscrew the screw.

2. Pull off the hinge from the bottom pin of the freezer

compartment door.

3. Open the freezer compartment door and unhinge at

the top.

4. Pull out the guide sleeve.

en

22

5. Unscrew the screw and remove the closing plate.

6. Rotate the closing plate through 180° and apply it

to the other side.

7. Apply the screw and tighten.

8. Insert the guide sleeve into the borehole.

9. Rotate the appliance door through 180° and at the

top insert the top pin into the guide sleeve.

10. Put the hinge onto the bottom pin of the freezer

compartment door.

11. Apply the screw and tighten.

Getting to know the appliance

Appliance

The features of the models may vary.

The illustrations may differ from your particular model.

Switching on the appliance

Plug the mains plug into the mains outlet socket.

The appliance will start cooling.

The light comes on when the appliance door is opened.

Notes on using the appliance

■ After switching on the appliance, it may be several

hours before the set temperature is reached.

Do not put any food in the appliance before then.

A Freezer compartment

B Fridge compartment

1 Ice-cube tray

2 Light switch

3 Temperature controller and LED light

4 Glass shelve

5 Cover for crisper drawer

6 Crisper drawer

7 Door pockets

8 Egg tray

9 Door pocket for bottles

en

23

Setting the temperature

Fridge compartment

Turn temperature controller to the required setting.

We recommend a medium temperature setting.

We recommend:

■ Perishable food should not be stored at a

temperature above the medium setting.

■ Medium setting for long-term storage of food.

■ Low setting for short-term storage of food (energy-

saving mode).

■ Select a higher setting only temporarily, when the

appliance door is frequently opened or large

quantities are placed in the refrigerator

compartment.

Note

When a cooler fridge compartment temperature was

set while the outside temperature is higher, the cooling

unit runs very frequently or without interruptions. This

results in higher energy consumption.

Freezer compartment

The temperature in the refrigerator compartment will

affect the temperature in the freezer compartment.

Change the temperature in the refrigerator

compartment in order to change the temperature in the

freezer compartment.

Temperatures which are set higher in the refrigerator

compartment will increase temperatures in the freezer

compartment.

Usable capacity

You will find the details of the usable capacity on the

rating plate inside the appliance.

Fridge compartment

The fridge compartment is the perfect place for keeping

ready meals, bread and pastries, jams and preserves,

condensed milk and hard cheeses.

When placing food in the fridge, follow

these guidelines

■ Keep fresh, untouched food in the fridge. In that way

it will keep longer and stay fresher.

■ In the case of ready-made products and packaged

foods and liquids, pay attention to the manufacturer's

specified best-before or use-by date.

■ In order to maintain flavour, colour and freshness,

keep food well packed or covered over. That also

prevents flavours from mixing and the plastic parts

from becoming discoloured in the fridge

compartment.

■ Allow warm food and beverages to cool before

putting them into the appliance.

Note

Keep food from coming into contact with the rear panel.

Otherwise, the air circulation will be impaired.

Food or packaging could also become frozen to the

rear panel.

Pay attention to the temperature zones in

the fridge compartment

The air circulation produces different temperature

zones in the fridge compartment:

■ The coldest zones are close to the rear panel.

■ The warmest zone is at the very top of the appliance

door.

Note

Keep items such as hard cheese and butter in the

warmest zone. That will allow the cheese to continue

developing its flavour and the butter will remain

spreadable.

Freezer compartment

Use the freezer compartment for the

following

■ Storing deep frozen food.

■ To make ice cubes.

■ To freeze small quantities of food.

Note

Make sure that the freezer compartment door is always

closed. When the door is open, the frozen foods

defrost. The freezer compartment ices up heavily. In

addition: Energy is wasted due to the power

consumption.

cold: Warmer temperature

extra cold: Cooler temperature (higher energy

consumption)

en

24

Freezing capacity

You will find information on the freezing capacity on the

rating plate.

Freezing and storing

Purchasing frozen foods

■ Packaging must not be damaged.

■ Observe the best before date.

■ The temperature in the commercial chest freezer

must be -18 °C or colder.

■ As far as possible, frozen food must be transported

in an insulated container and quickly placed in the

freezer compartment.

When arranging the food, note the

following

Spread the items out well in the freezer compartment.

Note

Food that is already frozen must not come into contact

with the food that is to be freshly frozen.

Storing frozen food

Avoid contact between food and rear panel. Otherwise

the air circulation will be impaired.

Food or packaging could freeze to the rear panel.

Freezing fresh food

Only use fresh, undamaged food for freezing.

In order to retain the nutritional value, aroma and colour

of the food as much as possible, blanch vegetables

before they are frozen.

Blanching is not required for aubergines, peppers,

courgettes and asparagus.

You can find literature about freezing and blanching in

bookshops.

Note

Do not allow food that is to be frozen to sit right next to

food that has already been frozen.

■ The following are suitable for freezing:

Baked goods, fish and seafood, meat, game, poultry,

vegetables, fruit, herbs, eggs without their shells,

dairy products such as cheese, butter and curd

cheese, prepared dishes and leftovers such as

soups, stews, cooked meat and fish, potato dishes,

baked casseroles and sweet foods.

■ The following are not suitable for freezing:

Types of vegetable that are usually eaten raw, such

as lettuces or radishes, eggs in their shells, grapes,

whole apples, pears and peaches, hard-boiled eggs,

yoghurt, curds, soured cream, crème fraîche and

mayonnaise.

Packing frozen food

Pack food so that it is airtight to prevent it from losing

its flavour or drying out.

1. Store food in its packaging.

2. Press out any air.

3. Close the packaging tightly.

4. Label packaging with its contents and date of

freezing.

The following are suitable as packaging:

Plastic film, polyethylene hose film, aluminium foil,

freezer bags.

You will find these products at your specialist dealer.

The following are not suitable as packaging:

Wrapping paper, greaseproof paper, cellophane,

rubbish bags and used shopping bags.

The following are suitable for sealing packaging:

Rubber bands, plastic clips, pack-twines, cold-resistant

scotch tape, or similar.

Polyethylene bags and hose film can be fused closed

using a bag sealer.

Storage life of frozen foods

The storage life depends on the type of food.

At a temperature of -18 °C:

■ Fish, sausages, prepared dishes, baked goods:

Up to 6 months.

■ Cheese, poultry, meat:

Up to 8 months.

■ Vegetables, fruit:

Up to 12 months.

Defrosting frozen food

You can choose between the following options,

depending on the type of food and its intended use:

■ at ambient temperature

■ in the fridge

■ in an electric oven, with/without hot air convection

■ In the microwave oven.

m Caution

Do not refreeze defrosted food. It can only be refrozen

after it has been made into a ready-to-eat meal (cooked

or roasted).

Do not continue to use the complete max. storage time

for the frozen food.

en

25

Fittings

Glass shelve

The glass shelve can be removed and fitted at different

heights.

Removing

Lift the glass shelf at the back and pull it out.

Inserting

Slide the glass shelf backwards on the guide rails until

it snaps downwards into place.

Door pockets

The door pockets can be removed.

Removing

Press the door pocket on one side inwards until this

side can be removed by pulling it upwards.

Inserting

Insert the door pocket on one side into the guide. Slide

the other side down until it engages.

Crisper drawer

The crisper drawer is particularly suitable to storage of

fruit and vegetables.

The crisper drawer can be removed for loading and

unloading and cleaning.

The cover of the crisper drawer can be removed for

cleaning purposes.

en

26

Ice-cube tray

The ice-cube tray is for producing and keeping ice

cubes in.

1. Fill the ice-cube tray ¾ full of drinking water and

place in the frozen food container.

2. If the ice-cube tray is stuck to the freezer

compartment, loosen with a blunt implement only

(spoon-handle).

3. To loosen the ice cubes, twist the ice-cube tray

slightly or hold briefly under flowing water.

Egg tray

The egg tray is used to store eggs.

Switching off and shutting

down the appliance

Switch off the appliance

Unplug the appliance from the mains or switch off the

circuit-breaker.

Putting the appliance out of service

If you do not use the appliance for long periods:

1. Remove all food from the appliance.

2. Switch off the appliance.

3. Defrost the appliance.

4. Clean the appliance.

5. Leave the appliance door open.

Defrosting

Fridge compartment

While the appliance is in use, drops of condensation or

frost form on the back of the fridge compartment. As

the rear panel defrosts automatically, it is not necessary

to remove the frost or the condensation.

Freezer compartment

A layer of frost in the freezer compartment impairs the

cooling effect on the frozen food and increases the

power consumption. If there is a layer of frost, you must

defrost the appliance.

General tips

■ When putting food in or taking food out, open the

freezer compartment door for as little time as

possible.

■ Do not install the appliance in a damp room. A high

level of humidity aids the formation of frost.

■ Package fresh food so that it is as air-tight as

possible.

m Caution

Do not scrape away the layer of ice using a knife or a

sharp object. You could damage the refrigerant pipes. If

refrigerant shoots out, it may ignite or cause eye

injuries.

Defrosting the appliance

1. Turn the temperature controller to the coldest

temperature approx. 3 hours before the defrosting

to ensure that the food is thoroughly frozen.

2. After 3 hours, switch off the appliance.

3. Take out the food and store it in a cool place. Place

blocks of ice (if you have one) on the food.

4. Leave the appliance door and the freezer

compartment door open.

5. Put a wiping cloth inside the freezer compartment

and one in front of the appliance to collect water

that might escape during the defrosting process.

6. Wait until the layer of ice can be removed.

7. Remove the layer of ice, clean the freezer

compartment and wipe dry its inside.

8. Switch on the appliance and put the food back in.

Defrosting aids

To speed up the defrosting process, you can use a

plastic scraper to remove the layer of ice.

m Caution

Never use electrical appliances, defrosting sprays or

open flames to defrost the freezer, e.g. heaters, steam-

cleaning appliances, candles, oil lamps, etc. Do not

place any saucepans containing hot water in the

appliance in order to speed up the defrosting.

en

27

Cleaning the appliance

m Caution

■ Do not use gritty, acidic or chlorine-based cleaning

agents or solvents.

■ Do not use abrasive cleaning pads or sponges that

may scratch surfaces. This may lead to corrosion of

the metallic surfaces.

■ Never clean the shelves or containers in the

dishwasher. The parts may warp.

Proceed as follows:

1. Switch off the appliance before cleaning.

2. Unplug the appliance from the mains or switch off

the circuit-breaker.

3. Take out the food and store it in a cool place. Place

blocks of ice (if you have one) on the food.

4. Wait until the layer of frost has thawed out.

5. Clean the appliance with a soft cloth, lukewarm

water, and a little pH-neutral washing-up liquid. The

washing-up liquid solution must not be allowed to

get into the lights or run into the evaporation tray

through the drain hole.

6. Only wipe the door seal with clean water and then

rub it until it is dry.

7. Clean the condensator, air intake and exhaust

opening with a brush or vacuum cleaner.

8. Clean the drain hole with a cotton swab.

9. After cleaning, reconnect the appliance to the

mains and switch it on.

10. Put the food back in.

Fittings

All the variable components of the appliance can be

removed for cleaning (see section headed Fittings).

Smells

If you notice unpleasant smells:

1. Switch off the appliance.

2. Remove all food from the appliance.

3. Clean the inside of the appliance (see section

headed Cleaning the appliance).

4. Clean all packaging.

5. Pack strongly smelling food in air-tight containers to

prevent odours.

6. Switch on the appliance again.

7. Arrange the food.

8. After 24 hours, check again to see if the smells

have reappeared.

Lighting (LED)

Your appliance is equipped with a maintenance-free

LED light.

Any repair work on the lighting must only be carried out

by the after-sales service or authorised experts.

Saving energy

■ Install the appliance in a dry, well ventilated room.

The appliance must be installed out of direct sunlight

and away from heat sources (e.g. heating elements,

cooker).

Use an insulating plate if necessary.

■ Allow hot food and drinks to cool before placing

them in the appliance.

■ Place frozen food in the fridge compartment to

defrost and utilise the low temperature of the frozen

food to cool other food.

■ Only open the appliance door for as short a time as

possible.

■ To prevent the food warming up quickly in the event

of a power cut or a fault, place blocks of ice (if you

have one) on the food.

■ Make sure that the appliance door is always closed.

■ The arrangement of the equipment parts shown in

the section Getting to know the appliance requires

the least amount of energy. Any other arrangements

can result in higher energy consumption.

■ To prevent increased power consumption,

occasionally clean the air vent with a soft brush or

vacuum cleaner.

Operating noises

Completely normal noises

Humming

Motors running (e.g. refrigeration units, ventilator).

Bubbling, whirring or gurgling noises

Refrigerant circulating through the pipes.

Clicking

Motors, switches or solenoid valves are switching on/

off.

Preventing noises

The appliance is not standing straight

Make sure the appliance is exactly aligned by using a

spirit level. To adjust the position of the appliance, use

the adjustable feet or place something underneath.

The appliance is touching adjacent units or

appliances

Move the appliance away from adjacent furniture or

appliances.

Containers or shelves are wobbling or sticking

Check the removable parts and re-insert them if

necessary.

Containers are touching

Move the containers apart slightly.

en

28

Rectifying minor faults yourself

Before calling After-sales Service:

Check whether you can rectify the fault yourself by using the notes below.

You must pay the cost of the After-sales Service call out – even during the guarantee period.

Problem Possible cause Remedy

Appliance is not cooling/

freezing.

The lighting is not working.

Power cut. Check whether there is power to the

appliance.

Circuit-breaker is switched off. Check circuit-breaker.

Power plug not properly plugged in. Check whether power plug is properly

plugged in.

The refrigeration unit switches

on with increasing frequency

and for longer periods.

The appliance door is being opened

frequently.

Do not open the appliance door

unnecessarily.

The ventilation openings are covered. Remove any obstructions.

Placing large quantities of food in the

appliance.

Set a lower temperature.

The temperature setting is too low. Set a higher temperature.

The appliance is too close to a heat

source or the ambient temperature is

too warm.

See section headed Installing the appliance.

The fridge compartment/

freezer compartment is too

warm.

The appliance door is being opened

frequently.

Do not open the appliance door

unnecessarily.

Placing large quantities of food in the

appliance.

Set a lower temperature.

The temperature setting is too high. Set a lower temperature.

The appliance is too close to a heat

source or the ambient temperature is

too warm.

See section headed Installing the appliance.

The fridge compartment/

freezer compartment is too

cold.

The temperature setting is too low. Set a higher temperature.

The (LED) lighting does not

work.

The LED lighting is faulty. See section headed Lighting (LED).

Door switch is sticking. Check whether you can move the door

switch.

Unpleasant smells are

noticeable.

Strongly smelling food not packed in

air-tight containers.

Clean the appliance. Pack strongly smelling

food in air-tight containers (see section

headed Smells).

In the appliance a layer of ice

is forming.

The ventilation openings are covered. Remove any obstructions.

The appliance door was not closed

completely.

Close the appliance door completely.

The door seal is dirty. Clean the door seal. See section headed

Cleaning the appliance.

The appliance door can only

be closed with difficulty.

Food prevent the appliance door from

closing correctly.

Remove any obstructions.

The appliance is not aligned. Align the appliance with a spirit level. See

section headed Aligning the appliance.

After a cooler temperature was

set, the cooling machine does

not switch on immediately.

This is normal, there is no fault.

On the appliance bottom or on

the trays, water has

accumulated.

The drain hole is plugged. Clean the drain hole with a cotton swab.

See section headed Cleaning the appliance.

en

29

After-sales Service

You can find your local After-sales Service centre in the

phone book or the After-sales Service directory. Please

quote the product number (E-Nr.) and production

number (FD-Nr.) of your appliance.

You will find this information on the rating plate.

Please help us to avoid unnecessary journeys by

quoting the appliance and production number. By

doing so, you will save any associated additional

charges.

Booking a repair call-out and advice on

faults

The After-sales Service contact details for all countries

are listed in the attached After-sales Service directory.

GB 0344 892 8979 Calls charged at local or

mobile rate.

IE 01450 2655 0.03 € per minute at peak.

Off peak 0.0088 € per

minute.

US 800 944 2904 toll-free

Page is loading ...

Bosch KIR24V21 & KIR24V20GB Owner's manual

Bosch KIR24V21 & KIR24V20GB Owner's manual

in other languages

Related papers

Other documents