Lindy 32849 User manual

  • Hello! I am an AI chatbot trained to assist you with the Lindy 32849 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (Jul 2001)
LINDY USB Webcam
Manual English
Benutzerhandbuch Deutsch
Manuel Français
Manuale Uso Italiano
LINDY Art. Nr. 32849
www.LINDY.com
English Manual
Overview
The LINDY USB Webcam is simple to install into the USB port of a computer. No further
hardware required, simply Plug & Play. The software supplied allows the capture of single
pictures or film sequences.
The camera is bundled with the following software for the PC:
Netmeeting (for video conferencing)
Photo Special Effects (Image editing)
Photo EZ (Photo Album)
Photo Greeting Cards
Video Capture (Editing of film sequences)
Video Email (sending videos by email)
Video Monitor (security program)
Software for the Mac is not included, however, you can easily download Apple Video Player
from the Apple website.
Features:
CMOS sensor, 300K pixels
Max. resolution: 640x480
Frame rate: up to 30 frames per second
Snapshot button
Min. Illumination: 5 Lux @ fl.4 (3000K)
No capture card and no power adaptor needed
Power supplied by USB Bus
Cable length: Approx. 1,4m
Operating systems: Windows 98/ME/2000, Mac OS 9.0 or above
Package Contents:
LINDY USB Webcam
CD with drivers and software
This manual
Driver Installation:
Windows 98/ME/2000:
Insert the CD into the CD-Rom drive. The installation will start automatically. Choose
”Installation of camera drivers“ and follow the instructions in the pop up menus. After the drivers
have been installed, restart the computer. Then connect the camera to the USB port of the
computer. The device will instantaneously become active.
When you install the drivers a small program will automatically be added and shown as an icon
on the screen. With this program you can take pictures by pushing the snapshot button on the
camera.
Software installation:
Insert the CD into the CD-Rom drive. The installation routine will start automatically. Choose
Installation of the software and follow the instructions in the pop up menus. You can choose
which programs to be installed.
Macintosh Installation:
Insert the CD ROM in to the CD reader.
Drag and drop the file TC 300_MAC.sit from the CD ROM into your extensions folder
In the extensions folder click the file and it will automatically open.
A new file will appear on your desktop called USBCAMERA".
Restart the Mac. Connect the USB camera.
Once the camera is detected an LED will become active on the camera.
Use appropriate software (not supplied, although Apple Video Player is available from the Apple
Website above) to utilise the camera.
Once the camera is operating, use the front lens to focus the picture by rotating left or right.
/