4
Instruction Manual Musical Nightlight Goodnight Moon
GB
USA
Age: From 0 Months +
GENERAL WARNING
Please read these instructions carefully and keep for future reference.
This toy requires 2 x “AAA” 1.5 Volt alkaline type batteries.
For your child’s safety: Warning!
• Before use remove and dispose of any plastic bags and any other packaging (e.g. fasteners,
xing ties, etc.) and keep them out of reach of children.
• Check the toy regularly for signs of wear and damage. Should any part be damaged, do not
use and keep out of reach of children.
• This toy must be used under adult supervision.
INSTRUCTIONS ON HOW TO FIT THE TOY TO THE COT
• This toy must only be tted by an adult.
• The toy is designed to be tted to cots with rigid sides, and should not be used on cots with
mesh sides.
• The panel must be tted to the cot only by using the components contained in the package.
Do not use any additional laces or ties. Ensure that the lower part of the panel is placed on
the cot.
• Ensure that the fabric strap is fastened to the cot correctly with the Velcro strap.
• Check the toy regularly to ensure that it is securely tted to the cot.
INSTRUCTIONS FOR USE
The cot panel soothes the newborn baby to sleep with sweet melodies and light effects.
The luminous notes on the moon create a magic atmosphere with soft, colourful lights moving
at the rhythm of a reassuring classical melody by Mozart. The music stimulates the develop-
ment of visual skills and soothes baby to sleep.
2 different function modes can be selected by moving the switch located on the side of the
panel:
melody accompanied by colourful light effects, for approximately 5 minutes.
lights only, for reassuring baby to sleep, for approximately 5 minutes.
FITTING AND/OR REPLACING BATTERIES
• Batteries must only be tted by an adult.
• To replace the batteries:
• Locate the battery compartment, as shown in diagram A. Loosen the screw on the battery
compartment cover, remove the spent batteries and t 2 x “AAA” 1.5 Volt type batteries,
ensuring that they have been tted in the correct polarity (as shown on the product). Close
the battery cover, and tighten the screw.