Rangemaster 92820 CLASSIC 90cm HOOD CREAM/CHROME User manual

Libretto di Istruzioni

Instructions Manual

Manuel d’Instructions

Bedienungsanleitung

Gebruiksaanwijzing

Manual de instrucciones

Manual de Instruções

Käyttöohje

www.rangemaster.co.uk

2

INDICE

CONSIGLI E SUGGERIMENTI.............................................................................................................................................. 4

CARATTERISTICHE.............................................................................................................................................................. 7

INSTALLAZIONE................................................................................................................................................................... 8

USO...................................................................................................................................................................................... 14

MANUTENZIONE ................................................................................................................................................................15

INDEX

RECOMMENDATIONS AND SUGGESTIONS................................................................................................................... 17

CHARACTERISTICS...........................................................................................................................................................20

INSTALLATION.................................................................................................................................................................... 21

USE...................................................................................................................................................................................... 27

MAINTENANCE...................................................................................................................................................................28

SOMMAIRE

CONSEILS ET SUGGESTIONS.......................................................................................................................................... 30

CARACTERISTIQUES......................................................................................................................................................... 33

INSTALLATION.................................................................................................................................................................... 34

UTILISATION....................................................................................................................................................................... 40

ENTRETIEN......................................................................................................................................................................... 41

INHALTSVERZEICHNIS

EMPFEHLUNGEN UND HINWEISE................................................................................................................................... 43

CHARAKTERISTIKEN.........................................................................................................................................................46

MONTAGE........................................................................................................................................................................... 47

BEDIENUNG........................................................................................................................................................................53

WARTUNG........................................................................................................................................................................... 54

INHOUDSOPGAVE

ADVIEZEN EN SUGGESTIES............................................................................................................................................. 56

EIGENSCHAPPEN.............................................................................................................................................................. 59

INSTALLATIE....................................................................................................................................................................... 60

GEBRUIK............................................................................................................................................................................. 66

ONDERHOUD...................................................................................................................................................................... 67

ÍNDICE

CONSEJOS Y SUGERENCIAS........................................................................................................................................... 69

CARACTERÍSTICAS ........................................................................................................................................................... 72

INSTALACIÓN..................................................................................................................................................................... 73

USO...................................................................................................................................................................................... 79

MANTENIMIENTO...............................................................................................................................................................80

IT

EN

FR

DE

NL

ES

3

ÍNDICE

CONSELHOS E SUGESTÕES............................................................................................................................................ 82

CARACTERÍSTICAS ........................................................................................................................................................... 85

INSTALAÇÃO....................................................................................................................................................................... 86

UTILIZAÇÃO........................................................................................................................................................................ 92

MANUTENÇÃO.................................................................................................................................................................... 93

SISÄLTÖ

OHJEET JA SUOSITUKSET...............................................................................................................................................95

MITAT JA OSAT .................................................................................................................................................................. 98

ASENNUS............................................................................................................................................................................99

KÄYTTÖ............................................................................................................................................................................. 107

HUOLTO ............................................................................................................................................................................108

PT

FI

Page is loading ...

EN

1

17

RECOMMENDATIONS AND SUGGESTIONS

The Instructions for Use apply to several versions of this appliance.

Accordingly, you may find descriptions of individual features that do not

apply to your specific appliance.

INSTALLATION

• The manufacturer will not be held liable for any damages resulting from

incorrect or improper installation.

• The minimum safety distance between the cooker top and the extractor hood

is 650 mm (some models can be installed at a lower height, please refer to

the paragraphs on working dimensions and installation).

• Check that the mains voltage corresponds to that indicated on the rating

plate fixed to the inside of the hood.

• For Class I appliances, check that the domestic power supply guarantees

adequate earthing.

Connect the extractor to the exhaust flue through a pipe of minimum

diameter 120 mm. The route of the flue must be as short as possible.

• Do not connect the extractor hood to exhaust ducts

carrying combustion fumes (boilers, fireplaces, etc.).

• If the extractor is used in conjunction with non-electrical

appliances (e.g. gas burning appliances), a sufficient

degree of aeration must be guaranteed in the room in

order to prevent the backflow of exhaust gas. The

kitchen must have an opening communicating directly

with the open air in order to guarantee the entry of clean air. When the

cooker hood is used in conjunction with appliances supplied with energy

other than electric, the negative pressure in the room must not exceed 0,04

mbar to prevent fumes being drawn back into the room by the cooker hood.

• The air must not be discharged into a flue that is used for

exhausting fumes from appliances burning gas or other

fuels (not applicable to appliances that only discharge the

air back into the room).

• In the event of damage to the power cable, it must be

replaced by the manufacturer or by the technical service

department, in order to prevent any risks.

2°

EN

1

18

• If the instructions for installation for the gas hob specify a greater distance

specified above, this has to be taken into account. Regulations concerning

the discharge of air have to be fulfilled.

• Use only screws and small parts in support of the hood.

Warning: Failure to install the screws or fixing device in accordance with

these instructions may result in electrical hazards.

• Connect the hood to the mains through a two-pole switch having a contact

gap of at least 3 mm.

USE

• The extractor hood has been designed exclusively for domestic use to

eliminate kitchen smells.

• Never use the hood for purposes other than for which it has been designed.

• Never leave high naked flames under the hood when it is in operation.

• Adjust the flame intensity to direct it onto the bottom of the pan only, making

sure that it does not engulf the sides.

• Deep fat fryers must be continuously monitored

during use: overheated oil can burst into flames.

• Do not flambè under the range hood; risk of fire.

• This appliance can be used by children aged from

8 years and above and persons with reduced

physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given supervision or instruction

concerning use of the appliance in a safe way and understand the hazards

involved. Children shall not play with the appliance. Cleaning and user

maintenance shall not be made by children without supervision.

• This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

EN

1

19

• “CAUTION: Accessible parts may become hot when used with cooking

appliances.”

MAINTENANCE

• Switch off or unplug the appliance from the mains supply before carrying out

any maintenance work.

• Clean and/or replace the Filters after the specified time period (Fire hazard).

• The Grease filters must be cleaned every 2 months of operation, or more

frequently for particularly heavy usage, and can be washed in a dishwasher.

• The Activated charcoal filter is not washable and cannot be regenerated,

and must be replaced approximately every 4 months of operation, or more

frequently for particularly heavy usage.

• "Failure to carry out cleaning as indicated will result in a fire hazard".

• Clean the hood using a damp cloth and a neutral liquid detergent.

The symbol on the product or on its packaging indicates that this product

may not be treated as household waste. Instead it shall be handed over to the

applicable collection point for the recycling of electrical and electronic

equipment. By ensuring this product is disposed of correctly, you will help

prevent potential negative consequences for the environment and human

health, which could otherwise be caused by inappropriate waste handling of

this product. For more detailed information about recycling of this product,

please contact your local city office, your household waste disposal service or

the shop where you purchased the product.

EN

2

20

CHARACTERISTICS

Dimensions

75 85

Components

Ref. Q.ty Product Components

1 1 Hood Body, complete with: Controls, Light,

Blower, Filters

2 1 Telescopic Chimney comprising:

2.1 1 Upper Section

2.2 1 Lower Section

9 1 Reducer Flange ø 150-120 mm

10 1 Adapting ring ø 120-125 mm

15 1 Air Outlet Connection

Ref. Q.ty Installation Components

7.2.1 2 Upper Chimney Section Fixing Brackets

11 6 Wall Plugs

12a 6 Screws 4.2 x 44,4

12c 6 Screws 2.9 x 9.5

16 2 Screws M5 x 16 (Optional)

17 1 Styling rail (Optional)

18 2 Cap (Optional)

Q.ty Documentation

1 Instruction Manual

16

17

18

EN

2

21

209

X

110 110

INSTALLATION

Wall drilling and bracket fixing

W

all marking:

• Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the

centre of the area in which the hood will be installed.

• Draw a horizontal line at 650 mm above the hob for installation without the back panel, or at

height H (height of the visible part of the panel) for installation with the back panel.

• Place bracket 7.2.1 on the wall as shown about 1-2 mm from the ceiling or upper limit align-

ing the centre (notch) with the vertical reference line.

• Mark the wall at the centres of the holes in the bracket.

• Place bracket 7.2.1 on the wall as shown at X mm below the first bracket (X = height of the

upper chimney section supplied), aligning the centre (notch) with the vertical line.

• Mark the wall at the centres of the holes in the bracket.

• Mark a reference point on the horizontal reference line as indicated, 110 mm from the verti-

cal reference line and 209 mm above the horizontal reference line.

• Repeat this operation on the other side.

• Drill ø 8 mm holes at all the centre points marked.

• Insert the wall plugs 11 in the holes.

• Fix the brackets using the 12a (4,2 x 44,4) screws supplied.

• Insert the two screws 12a (4,2 x 44,4) supplied in the hood body fixing holes, leaving a gap

of 5-6 mm between the wall and the head of the screw.

REAR PANEL (OPTIONAL)

The Rear Panel must be fitted before fixing the hood body and, for both upper and lower posi-

tion fixing, must be fitted at the correct height prior to installing the bases. As this operation is

rather complex, it should be carried out either by the kitchen installer or a qualified person

who knows the final dimensions of the units.

For the upper fixing position, proceed as follows:

• Rest the back panel on the base, inserting the lower plate between the upper surface and the

wall, centring it on the vertical reference line.

• Mark the centres of the two holes in the upper plate.

• Drill ø 8 mm holes at all the centre points marked.

• Insert the wall plugs 11 in the holes.

• Fix the brackets using the 12a screws supplied.

• Fix the back panel (where present) using the 12a screws supplied.

Page is loading ...

EN

2

24

Mounting the hood body

• Hook the hood body onto the screws 12a.

• Fully tighten the support screws 12a.

Connections

DUCTED VERSION AIR EXHAUST SYSTEM

When installing the ducted version, connect the hood to

the chimney using either a flexible or rigid pipe ø 150 or

125 mm, the choice of which is left to the installer.

• To install a ø 125 mm air exhaust connection, insert

the reducer flange 9 on the hood body air outlet and

the adapting ring ø120-125 10a on the reducer flange.

• Fix the pipe in position using sufficient pipe clamps

(not supplied).

• Remove any activated charcoal filters.

9

ø 125

10

ø 150

Exhausted mode Recommendations and suggestions

Connect the extractor to the exhaust flue through a pipe of minimum diameter 125 mm.

The route of the flue must be as short as possible.

Ideal ducting distance to discharge outlet is maximum of 3 meters straight run, or 2 meters and one 90 degree

bend preferably rigid duct.

Maximum ducting distance should be 3 meters, with one 90 degree bend.

For each additional 90 degree bend, the maximum distance is reduced by 1 meter.

If the ducting is not correct it will increase noise and reduce performance.

EN

2

25

RECIRCULATION VERSION AIR OUTLET

• Push fit the air outlet fitting 15 onto the air outlet

of the hood body.

• Ensure that the activated charcoal filters have

been inserted.

15

ELECTRICAL CONNECTION

• Connect the hood to the mains through a two-

pole switch having a contact gap of at least 3

mm.

• Remove the grease filters (see paragraph Mainte-

nance) being sure that the connector of the feed-

ing cable is correctly inserted in the socket

placed on the side of the fan.

Fix the Utensil Rail

• Position the Utensil rail on the front part of the

hood.

•

Fix using the Utensil rail to the hood using the

Screws 16.

• Insert the plugs 18.

16

18

EN

2

26

Chimney assembly

Upper exhaust Chimney

• Slightly widen the two sides of the upper chim-

ney and hook them behind the brackets 7.2.1,

making sure that they are well seated.

• Secure the sides to the brackets using the 4

screws 12c (2,9 x 9,5) supplied.

Lower exhaust Chimney

• Slightly widen the two sides of the chimney and

hook them between the upper chimney and the

wall, making sure that they are well seated.

• Fix the lower part laterally to the hood body us-

ing the 2 screws 12c (2,9 x 9,5) supplied.

12c

2.2

2.1

2

EN

2

27

USE

1

0

1

0

2

3

L

M

V

L Light Switches the lighting system on and off

M Motor Switches the extractor motor on and off

V Speed Sets the operating speed of the extractor:

1. Low speed, used for a continuous and silent air change in the presence of

light cooking vapour.

2. Medium speed, suitable for most operating conditions given the optimum

treated air flow/noise level ratio.

3. Maximum speed, used for eliminating the highest cooking vapour emis-

sion, including long periods.

EN

2

28

MAINTENANCE

Grease filters

CLEANING METAL SELF- SUPPORTING GREASE FILTERS

• The filters must be cleaned every 2 months of operation, or

more frequently for particularly heavy usage, and can be

washed in a dishwasher.

• Remove the filters one at a time by pushing them towards the

back of the group and pulling down at the same time.

• Wash the filters, taking care not to bend them. Allow them to

dry before refitting.

• When refitting the filters, make sure that the handle is visible

on the outside.

Grease filters

CLEANING METAL GREASE FILTERS

The filters are washable at least every 2 months of operation, or

more frequently for particularly heavy usage.

• Remove the filters one at a time by supporting them with one

hand and turning the safety knobs (pull and turn).

• Wash the filters, taking care not to bend them. Allow them to

dry before refitting.

• Refit them and fix them using the safety knobs provided (pull

and turn).

Activated charcoal filter (Recirculation version)

REPLACING THE ACTIVATED CHARCOAL FILTER

• The filter is not washable and cannot be regenerated, and must

be replaced approximately every 4 months of operation, or

more frequently for particularly heavy usage.

• Remove the metal grease filters.

• Remove the saturated activated carbon filter by releasing the

fixing hooks.

• Fit the new filter by hooking it into its seating.

• Refit the metal grease filters.

EN

2

29

Lighting

LIGHT REPLACEMENT

28 W halogen light.

• Remove the metal grease filters.

• Unscrew the bulbs and replace them with new ones having the

same characteristics.

• Replace the metal grease filters.

Lighting

LIGHT REPLACEMENT

20 W halogen light.

• Remove the 2 screws fixing the Lighting support, and pull it out

of from the Hood.

• Extract the lamp from the Support.

• Replace with another of the same type, making sure that the two

pins are properly inserted in the lamp holder socket holes.

• Refit the Support, fixing it in place with the two screws removed

as above.

Lamp Power (W) Socket Voltage (V) Dimension (mm) ILCOS Code

28 E14

220 – 240 104 x 35

HSGSB/C/UB-28-220/240-E14

28 E14 230 85x25

HDG-28-230-E14-25

20 G

4

12

33

x 9

HSG

/C/UB-20-12-G4

35 GU10 230 51 x 50,7 HAGS-35-230-GU10-51/40

50 G

U10 230 51 x 50,7 HAGS-35-230-GU10-51/20

20 GU4 12 40 x 35 HRGS-20-12-GU4-35/30

20 G

U5.3 12 46 x 51 HRGS-20-12-GU5.3-50/10

16 G13 95 720 x 26

FD-16/40/1B-E-G13-26/720

18

G

13 57 589,8 x 26

FD-18/40/1B-E-G13-26/600

9 G23

60 (lamp)

220-240 (starter)

167 x 28 FSD-9/27/1B-I-G23

11 G23

91 (l

amp)

220-240 (starter)

235,8 x 28 FSD-11/40/1B-I-G23

Page is loading ...

Rangemaster 92820 CLASSIC 90cm HOOD CREAM/CHROME User manual

This manual is also suitable for

Rangemaster 92820 CLASSIC 90cm HOOD CREAM/CHROME User manual

in other languages

Related papers

Other documents