HP V5020u Quick start guide

HP
Brand
HP
Model
V5020u
Category
Flat panel accessories
Type
Quick start guide

This manual is also suitable for

Left Button
Speaker
Right Button
Display
Delete Button
Record/
Ok Button
Lens
Microphone
Battery Cover
Strap Hook
SD Card Cover
HDMI Port
AV out Port
Power Button
Tripod Mount
ENGLISH
Tour of Your Camcorder
Tele/ Up Button/
Zoom In
Wide/ Down Button/ Zoom Out
LED
Battery Cover Latch
To reduce risk of loosing your video and photos, be sure
the camcorder is powered off before inserting and
removing the SD memory card.
Insert the SD memory card as illustrated. Push down on
the edge of the card until it "clicks" into position.
To remove the SD card, push down on the edge of the
card until it "clicks". Allow the card to eject and remove it
from the slot.
ENGLISH
Charge your battery
You must use the supplied AC adapter or USB cable.
You can charge your Camcorder whatever it is turned ON or OFF
Please allow 3 to 5 hours by AC adapter, 5 to 9 hours by USB cable
to recharge the battery.
Before using the camcorder, you must load the
Lithium-ion rechargeable battery.
1. Slide the latch at the bottom to remove cover.
2. Insert the battery following to the correct
polarity marks ( + or -).
3. Replace the battery cover.
1. Getting Started
2. Plug & Share
To view video recorded with this camcorder, it is recommended that the
bundled software, ArcSoft
®
MediaImpression, is installed on your PC/Laptop.
Note: This revision of ArcSoft
®
MediaImpression is Windows operating
systems ONLY.
Installing ArcSoft Software
1. Insert the supplied CD into your computer’s CD-ROM drive.
2. The autorun screen appears. Click Install Application Software.
Follow the on-screen instructions to complete the installation.
ArcSoft MediaImpression is a user-friendly application that helps
you managing your media, burning your video onto DVD, and
uploading your videos to YouTube easily.
1 Connect the Camcorder to the computer/laptop with the USB cable.
2 Highlight [PC Mode] and press the OK/Record button ( ) .
3 The Autoplay option screens should appear. There are two screens
represent the internal and external memory of the camcorder.
Choose one screen and click on the Import media files to hard disk.
4 The ArcSoft MediaImpression import options screen is launched. This will
transfer recorded video and photos to the desired folder location on the
computer/laptop hard disk drive . If content is on the other camcorder
memory source, please repeat step 3.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

HP V5020u Quick start guide

HP
Brand
HP
Model
V5020u
Category
Flat panel accessories
Type
Quick start guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents