Graco Inc. 309511 is a Pressure Roller Attachment, Model 245907, Series C, with a 9 in. (23 cm) roller frame, 45_ angle, 12 in. reach, and 1/2 in. (13 mm) nap roller cover. The maximum fluid inlet pressure is 3600 psi (24.8 MPa, 248 bar). It is designed to be used with MAGNUM or Graco paint hoses. The best operating pressure is the lowest pressure that provides an even paint supply to the roller and typically does not exceed 300 psi (2.1 MPa, 21 bar). The device helps to prevent the user from having to manually apply paint with a roller, which can be tiring and time-consuming.
Graco Inc. 309511 is a Pressure Roller Attachment, Model 245907, Series C, with a 9 in. (23 cm) roller frame, 45_ angle, 12 in. reach, and 1/2 in. (13 mm) nap roller cover. The maximum fluid inlet pressure is 3600 psi (24.8 MPa, 248 bar). It is designed to be used with MAGNUM or Graco paint hoses. The best operating pressure is the lowest pressure that provides an even paint supply to the roller and typically does not exceed 300 psi (2.1 MPa, 21 bar). The device helps to prevent the user from having to manually apply paint with a roller, which can be tiring and time-consuming.
Graco Inc. 309511 is a Pressure Roller Attachment, Model 245907, Series C, with a 9 in. (23 cm) roller frame, 45_ angle, 12 in. reach, and 1/2 in. (13 mm) nap roller cover. The maximum fluid inlet pressure is 3600 psi (24.8 MPa, 248 bar). It is designed to be used with MAGNUM or Graco paint hoses. The best operating pressure is the lowest pressure that provides an even paint supply to the roller and typically does not exceed 300 psi (2.1 MPa, 21 bar). The device helps to prevent the user from having to manually apply paint with a roller, which can be tiring and time-consuming.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI