ESAB LPC 50 is a plasma cutting power source designed to cut through a variety of conductive materials, including non-alloy and high-alloy steel as well as aluminum. It features two cutting current settings, 25 A and 50 A, allowing users to adjust the power output based on the thickness and type of material being cut. With a maximum cutting capacity of 13 mm for non-alloy/high-alloy steel and 8 mm for aluminum, the LPC 50 is suitable for a wide range of cutting applications.
ESAB LPC 50 is a plasma cutting power source designed to cut through a variety of conductive materials, including non-alloy and high-alloy steel as well as aluminum. It features two cutting current settings, 25 A and 50 A, allowing users to adjust the power output based on the thickness and type of material being cut. With a maximum cutting capacity of 13 mm for non-alloy/high-alloy steel and 8 mm for aluminum, the LPC 50 is suitable for a wide range of cutting applications.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
ESAB LPC 50 is a plasma cutting power source designed to cut through a variety of conductive materials, including non-alloy and high-alloy steel as well as aluminum. It features two cutting current settings, 25 A and 50 A, allowing users to adjust the power output based on the thickness and type of material being cut. With a maximum cutting capacity of 13 mm for non-alloy/high-alloy steel and 8 mm for aluminum, the LPC 50 is suitable for a wide range of cutting applications.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
ESAB LPL 30 User manual
-
-
-
-
-
-
-
-
-
Other documents
-
Lincoln Electric 10475 User manual
-
Lincoln Electric IM637-A User manual
-
-
-
-
-
-
Lincoln Electric Tomahawk 1000 Operating instructions