ADJ MB DMX II User manual

Brand: ADJ

Model: MB DMX II

Category: Stroboscopes & disco lights

Type: User manual

ADJ MB DMX II is a unique intelligent mirror ball motor that can be operated in three modes: DMX-512, Stand-Alone, or Master/Slave. It allows you to control the operation of a mirror ball motor as well as lights via DMX. With two built-in DMX-controlled AC power sockets, you can link several MB DMX II motors together for universal speed and rotation. It also features micro-stepping motors for smooth rotation, variable head rotation speed, and a built-in rigging point for safe and stable mounting.

User Instructions

ADJ Products, LLC - www.adj.com - MB DMX II™ Instruction Manual Page 2

Unpacking.....................................................................................3

Introduction..................................................................................3

Customer Support.............................................................................3

Safety Precautions...............................................................................4

Features.........................................................................................5

Product Registration.......................................................................5

DMX Set Up.........................................................................................6

Operation.............................................................................................8

UC IR & Airstream App Control..........................................................10

Mounting............................................................................................12

Breaker Reset.....................................................................................12

DMX Traits..........................................................................................13

Dipswitch Settings............................................................................14

Warranty.........................................................................................15

Specifications..............................................................................16

MB DMX II General Information

DOCUMENT VERSION

Please check www.adj.com for the latest revision/update of this guide.

Date

Document

Version

Notes

12/09/19

UC IR Control Added

ADJ Products, LLC - www.adj.com - MB DMX II™ Instruction Manual Page 3

MB DMX II Safety Precautions

ADJ Products, LLC - www.adj.com - MB DMX II™ Instruction Manual Page 4

Safety Issues:

•Toreducetheriskofelectricalshockorre,donotexposethis 

unit rain or moisture

• Donotspillwaterorotherliquidsintoorontoyourunit

• Donotattempttooperatethisunitifthepowercordhasbeen 

 frayedorbroken

• Donotattempttoremoveorbreakothegroundprongfrom 

 theelectricalcord.Thisprongisusedtoreducetheriskof 

 electricalshockandreincaseofaninternalshort

• Disconnectfrommainpowerbeforemakinganytypeofconnection

•Donotremovethecoverunderanyconditions.Therearenouser

 serviceablepartsinside

• Neverplugthisunitintoadimmerpack

• Alwaysbesuretomountthisunitinanareathatwillallowproper

 ventilation.Allowabout6”(15cm)betweenthisdeviceandawall

• Donotattempttooperatethisunit,ifitbecomesdamaged

• Thisunitisintendedforindooruseonly,useofthisproduct 

 outdoorsvoidsallwarranties

• Duringlongperiodsofnon-use,disconnecttheunit’smainpower

• Alwaysmountthisunitinsafeandstablematter

• Powercordsshouldberoutedsotheyarenotlikelytobewalked

 on,pinchedbyitemsplaceduponoragainstthem.

• Heat-Theapplianceshouldbesituatedawayfromheatsources

 suchasradiators,heatregisters,stoves,orotherappliances 

 (includingamplifiers)thatproduceheat.

• Thefixtureshouldbeservicedbyqualifiedservicepersonnelwhen:

 A.Thepower-supplycordortheplughasbeendamaged.

 B.Objectshavefallen,orliquidhasbeenspilledintotheappliance.

 C.Theappliancehasbeenexposedtorainorwater.

 D.Thefixturedoesnotappeartooperatenormallyorexhibitsa

markedchangeinperformance.

General Instructions: Tooptimizetheperformanceofthisproduct,

pleasereadtheseoperatinginstructionscarefullytofamiliarizeyour-

selfwiththebasicoperationsofthisunit.Theseinstructionscontain

important safety information regarding the use and maintenance of

thisunit.Pleasekeepthismanualwiththeunit,forfuturereference.

Unpacking: ThankyouforpurchasingtheMBDMXIIbyADJProducts,LLC.

EveryMBDMXIIhasbeenthoroughlytestedandhasbeenshipped

inperfectoperatingcondition.Carefullychecktheshippingcartonfor

damagethatmayhaveoccurredduringshipping.Ifthecartonappears

tobedamaged,carefullyinspectyourxtureforanydamageandbe

sureallaccessoriesnecessarytooperatetheunithasarrivedintact.In

thecasedamagehasbeenfoundorpartsaremissing,pleasecontact

ourtollfreecustomersupportnumberforfurtherinstructions.Donot

returnthisunittoyourdealerwithoutrstcontactingcustomersup-

port.

Introduction: The MB DMX II is a unique intelligent mirror ball motor

thatmaybeoperatedinthreemodes;DMX-512,Stand-Alone,orMaster/

Slave. The MB DMX II allows you to control the operation of a mirror

ball motor as well as lights via DMX operation. You may also link sev-

eralMBDMXIImotorstogethertoobtainuniversal speedandrotation.

An optional MINI/C black out controller may be purchased separately.

Customer Support: ADJ Products, LLC provides a toll free cus-

tomersupportline,toprovidesetuphelpandtoansweranyquestion

shouldyouencounterproblemsduringyoursetuporinitialoperation.

Youmayalsovisitusonthewebatwww.adj.comforanycomments

orsuggestions.ServiceHoursareMondaythroughFriday8:00a.m.to

4:30p.m.PacicStandardTime.

 Voice:  (800)322-6337

 Fax:  (323)582-2941

 E-mail: [email protected]

Warning! Topreventorreducetheriskofelectricalshockorre,do

notexposethisunittorainormoisture.

Caution!Therearenouserserviceablepartsinsidethisunit.Donot

attempt any repairs yourself, doing so will void your manufactures

warranty. In the unlikely event your unit may require service please

contactyournearestADJdealer.

MB DMX II General Information

Power Supply:Beforepluggingyourunitin,besurethesourcevolt-

ageinyourareamatchestherequiredvoltageforyourADJMBDMX

II.Becauselinevoltagemayvaryfromvenuetovenue,youshouldbe

sureyourunitvoltagesmatchesthewalloutletvoltagebeforeattempt-

ingtooperateyouxture.

DMX-512: DMXisshortforDigitalMultiplex.Thisisauniversalpro-

tocol used as a form of communication between intelligent fixtures

and controllers. ADMXcontrollersendsDMXdatainstructionsfrom

thecontrollertothefixture.DMXdataissentasserialdatathattrav-

elsfromfixturetofixtureviatheDATA“IN”andDATA“OUT”XLRter-

minalslocatedonallDMXfixtures(mostcontrollersonlyhaveaDATA

“OUT”terminal).

DMX Linking: DMXisalanguageallowingallmakesandmodelsof

dierentmanufacturestobelinkedtogetherandoperatefromasin-

glecontroller,aslongasallxturesandthecontrollerareDMXcom-

pliant.ToensureproperDMXdatatransmission,whenusingseveral

DMX fixturestrytouse the shortest cable path possible. The order

inwhichfixturesareconnectedinaDMXlinedoesnotinfluencethe

DMXaddressing.Forexample;afixtureassignedaDMXaddressof1

maybeplacedanywhereinaDMXline,atthebeginning,attheend,

oranywhereinthemiddle.WhenafixtureisassignedaDMXaddress

of1,theDMXcontrollerknowstosendDATAassignedtoaddress1

tothatunit,nomatterwhereitislocatedintheDMXchain.

Data Cable (DMX Cable) Requirements (For DMX and Master/

Slave Operation):The MB DMX IIcan be controlledvia DMX-512

protocol.TheADJMB DMXIIisatwochannelDMX unit.TheDMX

addressissetonthesidepanelusingthedipswitches.Yourunitand

yourDMXcontrollerrequireastandard3-pinXLR

connectorfordatainputanddataoutput(Figure

1).Ifyouaremakingyourowncables,besureto

usestandardtwoconductorshieldedcable(This

cablemaybepurchasedatalmostallprosound

andlightingstores).Yourcablesshouldbemade

withamaleandfemaleXLRconnectoroneither

endofthecable.AlsorememberthatDMXcable

mustbedaisychainedandcannotbesplit.

ADJProducts,LLC-www.adj.com-MBDMXII™InstructionManualPage6ADJProducts,LLC-www.adj.com-MBDMXII™InstructionManualPage5

Figure 1

MB DMX II DMX Set Up

• Micro-Stepping Motors for Smooth Rotation

• Uses Two DMX Channels

• DMX-512 Protocol Compatible

• Variable Head Rotation Speed

• Built-In Rigging Point

• Stand-Alone or Master/Slave Operation

• Linkable

• Two Built-In DMX Controlled AC Power Sockets

• Heavy Duty Mirror Ball Motor

• Rated for 20” Mirror Balls

• UC IR & Airstream Control (Sold Separately)

MB DMX II Features

The MB DMX II carries a one year (365 days) limited warranty.

Pleasefillouttheenclosedwarrantycardtovalidateyourpurchase.

All returned service items whether under warranty or not, must be

freight pre-paid and accompany a return authorization (R.A.) num-

ber. The R.A. number must be clearly written on the outside of the

returnpackage.AbriefdescriptionoftheproblemaswellastheR.A.

numbermustalsobewrittendownonapieceofpaperandincluded

intheshippingcontainer.Iftheunitisunderwarranty,youmustpro-

videacopyofyourproofofpurchaseinvoice.YoumayobtainaR.A.

number by contacting our customer support team on our toll free

customer supportnumberat (800) 322-6337. All packagesreturned

toservicenot displayingaR.A.numberontheoutsideofthepack-

agewillbereturnedtotheshipper.

MB DMX II Product Registration

ADJProducts,LLC-www.adj.com-MBDMXII™InstructionManualPage7 ADJProducts,LLC-www.adj.com-MBDMXII™InstructionManualPage8

Figure 2

DMX512 IN

3-PIN XLR

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

DMX512

DMX+,DMX-,COMMON

Termination reduces signal errors and

avoids signal transmission problems

and interference. It is always advisable

to connect a DMX terminal, (Resistance

120 Ohm 1/4 W) between PIN 2 (DMX-)

and PIN 3 (DMX +) of the last fixture.

DMX +

DMX -

COMMON

DMX512 OUT

3-PIN XLR

Figure 3

1 Ground

XLR Male Socket

XLR Pin Conguration

3 Hot

2 Cold

3 Hot

XLR Female Socket

Pin 3 = Data True (positive)

Pin 2 = Data Compliment (negative)

Pin 1 = Ground

Special Note: Line Termination.

When longer runs of cable are

used,youmayneedtouseaterminatoronthelastunittoavoiderratic

behavior.Aterminatorisa90-120ohm1/4wattresistorwhichiscon-

nectedbetweenpins2and3ofamaleXLRconnector(DATA+and

DATA-).ThisunitisinsertedinthefemaleXLRconnectorofthelast

unitinyourdaisychaintoterminatetheline.Usingacableterminator

(ADJ part number ZDMX/T) will decrease the possibilities of erratic

behavior.

MB DMX II DMX Set Up

DMX512 IN

3-PIN XLR

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

DMX512

DMX+,DMX-,COMMON

Termination reduces signal errors and

avoids signal transmission problems

and interference. It is always advisable

to connect a DMX terminal, (Resistance

120 Ohm 1/4 W) between PIN 2 (DMX-)

and PIN 3 (DMX +) of the last fixture.

DMX +

DMX -

COMMON

DMX512 OUT

3-PIN XLR

Figure 4

Notice: Besuretofollowgurethreewhenmakingyourowncables.

DonotusethegroundlugontheXLRconnector.Donotconnectthe

cable’sshieldconductortothegroundlugorallowtheshieldconduc-

tor to come in contact with the XLR’s outer casing. Grounding the

shieldcouldcauseashortcircuitanderraticbehavior.

5-Pin XLR DMX Connectors:

Somemanufacturesuse5-pinXLR

connectorsforDATAtransmissioninplaceof3-pin.5-pinXLRxtures

maybeimplementedina3-pinXLRDMXline.Wheninsertingstan-

dard5-pinXLRconnectorsintoa3-pinlineacableadaptormustbe

used,theseadaptorsarereadilyavailableatmostelectricstores.The

chartbelowdetailsapropercableconversion.

Conductor 5-Pin XLR Male (In)3-Pin XLR Female (Out)

Pin 1

Do Not Use

Pin 3

Pin 2

Pin 1

Pin 3

Pin 2

Not Used

Data True (+ signal)

Data Compliment (- signal)

Ground/Shield

3-Pin XLR to 5-Pin XLR Conversion

MB DMX II™ Operation

Operating Modes: TheMB DMX II maybeoperatedinthreedif-

ferentmodes. Always be sure to disconnect thepower supply after

changingtheoperatingmode,thisallowstheunittoresettothenew

operatingmode.Failuretodisconnectthepowersupplyafterchang-

ingtheoperatingmodemaycausetheunittofunctionimproperly.

• Stand alone mode - Theunitwillrotatetothepre-definedspeed

set with the dip switches. You can also use the optional UC IR

remote(soldseparately)tocontrolvariousfunctions.

• Master/Slave mode -Youcandaisychainupto16unitstogether

togetsynchronizedmotor rotation. YoucanalsousetheoptionalUC

IRremotetocontrolvariousfunctions.

• DMX control mode - Thisfunctionwill allowyou to control each

unit’sindividualtraitswithastandardDMX512controller.

Stand-Alone Mode: This function allows a single unit to operate

to any of the presets using the dipswitches. Only use this function

whenrunningasingleunit,orwhenrunningseveralunitsasindividu-

als.Pleasenotethisfunctiondoesnotallowindividualcontrolofthe

DMX traits.

1. ToactivatetheStand-Alonemode, locatethedipswitchesonthe

 sideoftheunitandflipdipswitch10tothe“on”position.

2.Followthedipswitchchartonpage14toselectapresetspeed

 andtocontrolmirrorballrotationdirection.

3. Attachthemirrorballtothemotorandconnectmainpower.

4. TheoptionalUCIRremote(soldseparately)may alsobeused to

 controlthemotor.Pleaseseepage10forUCIRcontrols.

Master/Slave Mode: This function will allow you to link up to 16

unitstogetherwithouttheuse ofanexternal controller. In a Master/

Slavesetuponeunitwillactasthecontrollingunitandtheotherswill

reacttothecontrollingunitspresets.AnyunitcanactasaMasteror

asaSlave.Pleasenotethisfunctiondoesnotallowindividualcontrol

oftheDMXtraitsandwillonlyruntotheunitsbuilt-inprograms.

1. UsingstandardXLRmicrophonecables,asdescribedonpages

 sixandseven,daisychainyourunitstogetherviatheXLRconnec-

 torsontherearoftheunits.RemembertheMaleXLRconnector

 istheinputandtheFemaleXLRconnectoristheoutput.Therst

 unitinthechain(master)willusethefemaleXLRconnectoronly.

ADJ Products, LLC - www.adj.com - MB DMX II™ Instruction Manual Page 9 ADJ Products, LLC - www.adj.com - MB DMX II™ Instruction Manual Page 10

 ThelastunitinthechainwillusethemaleXLRconnectoronly.

Forlongercablerunswesuggestaterminatoratthelastfixture.

2. SelectaMBDMXIItobethe“master”unit.Locatethedip- 

 switchesonthesideoftheunitandflipdipswitch10tothe“on”

 position.

3. Followthedipswitchchartonpage13toselectadesiredrotation

 speedanddirection.Besuretonotethatthisselectionwillbe

 universalthroughoutallmotorsinthechain.

4. Forallothermotorsinthechain(slaves)locatedthedipswitches

 onthesideoftheunitsandbesuredipswitch10isinthe“off”

 position.

5. Connectmainpowertoallthemotorsandtheywillimmediately

 begintorotatetothepresetsofthe“master”unit.

6. TheoptionalUCIRremote(soldseparately)may alsobeused to

 controlthemotor.Pleaseseepage10forUCIRcontrols.

Universal DMX Control: Thisfunctionallowsyoutouseauniversal

DMX-512 controllertocontrolrotationspeed,rotationdirection,and

thebuilt-inpowersockets(usuallyforpinspots).Operatingthrougha

DMXcontrollerallowsyouthefreedomtocreateuniqueandcustomized

programstailoredtoyourspecificindividualneeds.

1. TheMBDMXIIusestwoDMXchannels.Channelonecontrols

 powersocketslocatedonthesideoftheunit.Channeltwo 

 controlthemotor’srotationspeedanddirection.

2. TocontrolyourmotorinDMXmode,followtheset-upprocedures

 onpages7-9aswellastheset-upspecificationsthatareincluded

 withyourDMXcontroller.

3. UsetheDMXcontroller’sfaderstocontrolthevariousDMXfixture

 traits.AlistoftheDMXtraitsandvaluesislocatedonpage12.

4. Thiswillallowyoutocreateyourownprograms.

5. WhenusingaDMXcontrollerandsettingupforDMXoperation

 followtheDMXaddressingprocedureinyourcontroller’smanual.

 AllfixturesmustfollowaspecificDMXaddressingprotocolfor

 properoperationinDMXmode.

6. ForhelpoperatinginDMXoperationconsultthemanualincluded

 withyourDMXcontroller.

7. Forlongercableruns(morethana100feet)useaterminatoron

 thelastfixture.

MB DMX II™ Operation MB DMX II UC IR & Airstream App Control

The UC IR (sold separately) infrared remote gives you control of

variousfunctions(Seebelow).Tocontrolthefixtureyoumustaimthe

remoteatthefrontofthefixtureandbenomorethan30feetaway.

TousetheADJUCIRyoumustfirstconnecttheincludedIRreceiver

cable.Connectthiscabletotheminiinputjacklocatedonthesideof

theunitnearthedipswitches.

The Airstream IR (sold separately) remote transmitter plugs into

the headphone jack of your iOS phone or tablet. To control your

IR fixture you must raise the volume to the maximum on your iOS

phoneortabletandaimthetransmitteratthefixturesensorandbe

nomorethan15feetaway.AfteryouhavepurchasedtheAirstream

IR transmitters, the app is a free download from the app store for

youriOSphoneortablet.Theappcomeswith3pagesofcontroldepending

onthefixtureyouareusing.PleaseseebelowforIRfunctionsincluding

thecorrespondingapppage.

Works with App page 1.

STAND BY -Pressingthisbuttonwillturntheremotecontroloption

OnandOff.

FULL ON - ThiswillturnaconnectedlightOnandOff.

FADE/GOBO -Thisbuttonisinvalid.

“DIMMER +” and “DIMMER -” - “Dimmer +” will rotate the ball

clockwiseand“Dimmer-”willrotatetheballcounter-clockwise.

STROBE -Pressthisbuttontoactivatestrobing.

COLOR -Thisbuttonisinvalid.

1-9 - Use buttons 1-8 to select your rotation speed. “1” being the

fastestand“8”beingtheslowest.“9”willpause/stopthemotorfrom

rotating.

SOUND ON & OFF & Show 0 -Thesebuttonswillcontrolthestrobe

rate of a connected pinspot. Sound On is slowest strobe speed,

Show0ismediumspeed,andSoundOffisthefastestspeed.

SoundOn-1Hz

Show0-3.5Hz

SoundOff-7Hz

ADJ Products, LLC - www.adj.com - MB DMX II™ Instruction Manual Page 12ADJ Products, LLC - www.adj.com - MB DMX II™ Instruction Manual Page 11

MB DMX II Breaker Reset

MB DMX II Mounting

Mounting: The MB DMX II ships with a built-in rigging point and

twolargeholesinthebaseoftheunit(thataretobeusedforsafety

cables).Theriggingpointislocatedonthetopoftheunit.Thisrigging

pointissecuredtothexturebytwolargePhillipsscrews.Whenthe

riggingpointisnottobeusedandwhenthextureisshippedfromthe

manufacture,theriggingpointisshippedinverted(insidethetopofthe

unit).Whenthextureistobehungbytrussorothermeans,please

usetheriggingpointandsecurethexturewithsafetycables.Always

besuretormlysecuretheriggingpointtotheunit.TheMBDMXIIis

tomountedinbottom-uppositiontoaceilingormayhungfromtruss

usingaC-Clampratedat50poundsorgreater.

This unit is equipped with a built-in safety breaker. This breaker is

designedto closethe powercircuitin theevent ofaninternalshort

orpowersurge.Thiswillreducetheriskofelectricalshockorreand

protectthecircuitry.Toresetthebreaker,pushthebreakerbuttonin

untilyouhearit“pop”backintoplace.Ifthebreakercontinuestopop,

stopusingtheunitandcontactourcustomersupportteam,theunit

mayneedtobereturnedforservice.

MB DMX II MINI/C Control

Blackout Button

30 Foot Extension Cable

Blackout Indicator

Optional MINI/C (Not Included):

TheoptionalMINI/Ccontrollerallows

all units linked together to blackout.

Thisunitwillonlyblackoutthextures

andwillnotchangeorselectdierent

programs.

Discontinued October 2016

MB DMX II UC IR & Airstream App Control

REMOTE ON/OFF

CLOCKWISE ROTATION

COUNTER-CLOCKWISE

ROTATION

POWER OUT ON/OFF

STROBING

ROTATION SPEED CONTROL

1-8 = FAST - SLOW

9 = PAUSE ROTATION

STROBE SPEED CONTROL

SOUND ON = 1Hz (Slow)

SHOW 0 = 3.5Hz (Medium)

SOUND OFF = 7Hz (Fast)

Added Support in November 2016

ADJ Products, LLC - www.adj.com - MB DMX II™ Instruction Manual Page 13

MB DMX II DMX Traits

ADJ Products, LLC - www.adj.com - MB DMX II™ Instruction Manual Page 14

MB DMX II Dipswitch Settings

Dipswitch Function Settings

Dipswitches 1

8 Used to change the rotation speed during

Stand-Alone or Master/Slave mode

Master Motor Speed List

Switch

Speed

DIP1 DIP2 DIP3 DIP4 DIP5 DIP6 DIP7 DIP8

-------

OFF

OFF OFF

OFF

OFFOFF

OFF

OFFOFF

OFF

------

- ----

----

---

SPEED1 (0.5 rpm)

SPEED8 (5rpm)

SPEED2 (1 rpm)

SPEED3 (1.5 rpm)

SPEED4 (2 rpm)

SPEED5 (2.5 rpm)

SPEED6 (3 rpm)

SPEED7 (4 rpm)

Dipswitch 9 Control Rotation Direction;

On = CW Rotation / Off = CCW Rotation

Dipswitch 10 Controls Master/Slave Operation;

On = Master / Off = Slave

Note: Dipswitch 10 must be in the off postion for DMX operation

" - " = Dip Switch Off

The optional MINI/C may be used during Master/Slave

operation to stop motor rotation and to blackout the

electrical sockets

The chart below details the DMX traits in depth. The individual trait

can only be accessed by using an universal DMX controller. Note:

“Lamp” in channel 1 refers to the power socket located on the front

of the motor (this socket is intended to be used with lamps to light up

the mirror ball).

The charts below details the Master/Slave setting for Master/Slave

configuration. Use this configuration when you will be using two or

more fixtures in a Master/Slave configuration. Note: The “Master” set-

tings should only be used once at the first motor, using the “master”

setting more than once in the chain may result in erratic operation.

Model: MB DMX II™

Voltage*: 120v~60Hz or 220v~50/60Hz

Dimensions: 8”(L) x 4.8”(W) x 5.75”(H)

Weight: 4 Lbs.

Breaker: 3 Amp

Duty Cycle: None

DMX: 2 Channels

Working Position: Any Safe, Secure Position

Warranty: 1 Year (365 days)

* Voltage is preset at the factory and is not user selectable.

Please Note: Specications and improvements in the design

of this unit and this manual are subject to change without any

prior written notice.

MB DMX II Technical Specification

ADJProducts,LLC-www.adj.com-MBDMXII™InstructionManualPage15

ADJ Products, LLC

6122S.EasternAve.LosAngeles,CA90040USA

Tel:323-582-2650/Fax:323-725-6100

Web:www.adj.com/E-mail:[email protected]

A.D.J.SupplyEuropeB.V.

Junostraat 2

6468EWKerkrade

Netherlands

[email protected]/www.adj.eu

Tel:+31455468500/Fax:+31455468599

MB DMX II Warranty

MANUFACTURER’SLIMITEDWARRANTY

A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products

to be free of manufacturing defects in material and workmanship for a prescribed period from

the date of purchase (see specific warranty period on reverse). This warranty shall be valid only if the

product is purchased within the United States of America, including possessions and

territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable

evidence, at the time service is sought.

B. For warranty service you must obtain a Return Authorization number (RA#) before sending back

the product–please contact ADJ Products, LLC Service Department at 800-322-6337. Send the pro-

duct only to the ADJ Products, LLC factory. All shipping charges must be pre-paid. If the requested

repairs or service (including parts replacement) are within the terms of this warranty, ADJ Products, LLC

will pay return shipping charges only to a designated point within the United States. If the entire instru-

ment is sent, it must be shipped in it’s original package. No accessories should be shipped with the product.

If any accessories are shipped with the product, ADJ Products, LLC shall have no liability whatsoever for

loss of or damage to any such accessories, nor for the safe return thereof.

C. This warranty is void if the serial number has been altered or removed; if the product is modified in any

manner which ADJ Products, LLC concludes, after inspection, affects the reliability of the product; if the

product has been repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior

written authorization was issued to purchaser by ADJ Products, LLC; if the product is damaged because

not properly maintained as set forth in the instruction manual.

D. This is not a service contract, and this warranty does not include maintnance, cleaning or periodic check

up. During the period specified above, ADJ Products, LLC will replace defective parts at its expense

with new or refurbished parts, and will absorb all expenses for warranty service and repair labor by

reason of defects in material or workmanship. The sole responsibility of ADJ Products, LLC under this

warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole

discretion of ADJ Products, LLC. All products covered by this warranty were manufactured after August

15, 2012, and bear indentifying marks to that effect.

E. ADJ Products, LLC reserves the right to make changes in design and/or improvements upon its products

without any obligation to include these changes in any products theretofore manufactured.

No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with

products described above. Except to the extent prohibited by applicable law, all implied warranties made

by ADJ Products, LLC in connection with this product, including warranties of merchantability or fitness,

are limited in duration to the warranty period set forth above. And no warranties, whether expressed or

implied, including warranties of merchantability or fitness, shall apply to this product after said period

has expired. The consumer’s and/or Dealer’s sole remedy shall be such repair or replacement as is

expressly provided above; and under no circumstances shall ADJ Products, LLC be liable for any loss or

damage, direct or consequential, arising out of the use of, or inability to use, this product.

This warranty is the only written warranty applicable to ADJ Products, LLC Products and

supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore

published.

MANUFACTURER’S LIMITED WARRANTY PERIODS:

• Lighting Products = 1-year (365 days) Limited Warranty (Such as: Special Effect Lighting, Intelligent

Lighting, UV lighting, Strobes, Fog Machines, Bubble Machines, Mirror Balls, Par Cans, Trussing,

Lighting Stands etc. excluding LEDs and lamps)

• Laser Products = 90-Day Limited Warranty

• L.E.D. Products = 2-year (730 days) Limited Warranty (excluding motors, PCB boards, and power

supplies, which have a 1-year (365 day Limited Warranty) and batteries which have a 180 day

limited warranty).

ADJ MB DMX II User manual

Brand: ADJ

Model: MB DMX II

Category: Stroboscopes & disco lights

Type: User manual

Download PDF

report

ADJ MB DMX II User manual

ADJ MB DMX II User manual

Related papers

Other documents