Philips BTM2560 User manual

Brand: Philips

Model: BTM2560

Category: Home audio sets

Type: User manual

This manual is also suitable for

Micro music system

icro music s

stem

BTM2560

BTM2585

www.philips.com/support

User manual

1EN

Contents

1 Important 2

Safety 2

Notice 3

2 Your Micro Music System 4

Introduction 4

What's in the box 4

Overview of the main unit 5

Overview of the remote control 6

3 Get started 8

Connect speakers 8

Connect power 8

Prepare the remote control 9

Power on 9

Set the clock 9

4 Play 10

Play from disc 10

Play from USB 10

Control play 10

Skip tracks 10

Program tracks 11

Play from Bluetooth-enabled

devices 11

5 Listen to FM radio 12

Tune to a radio station 12

Store radio stations automatically 12

Store radio stations manually 13

Select a preset radio station 13

6 Adjust sound 13

Select a preset sound eect 13

Adjust volume level 13

Mute sound 13

7 Other features 14

Set the alarm timer 14

Set the sleep timer 14

Listen to an external device 14

Charge your devices 15

8 Product information 16

Specications 16

USB playability information 16

Supported MP3 disc formats 17

9 Trouble shooting 17

2 EN

1 Important

Safety

Read and understand all instructions

before you use this micro music system.

If damage is caused by failure to follow

the instructions, the warranty does not

apply.

This 'bolt of lightning' indicates

uninsulated material within the device

may cause an electrical shock. For the

safety of everyone in your household,

please do not remove the covering.

The 'exclamation mark' calls attention to

features for which you should read the

enclosed literature closely to prevent

operating and maintenance problems.

WARNING: To reduce the risk of re or

electric shock, the device should not be

exposed to rain or moisture and objects

lled with liquids, such as vases, should

not be placed on the device.

CAUTION: To prevent electric shock,

fully insert the plug. (For regions with

polarized plugs: To prevent electric

shock, match wide blade to wide slot.)

Warning

•

Never remove the casing of this apparatus.

• Never lubricate any part of this apparatus.

• Never look into the laser beam inside this

apparatus.

• Never place this apparatus on other

electrical equipment.

• Keep this apparatus away from direct

sunlight, naked ames or heat.

• Ensure that you always have easy access

to the power cord, plug or adaptor to

disconnect the apparatus from the power.

• Make sure that there is enough

free space around the product for

ventilation.

• Only use attachments/accessories

specied by the manufacturer.

• Battery usage CAUTION – To

prevent battery leakage which may

result in bodily injury, property

damage, or damage to the product:

• Install the battery correctly, +

and - as marked on the product.

• The battery (packed or installed)

shall not be exposed to

excessive heat such as sunshine,

re or the like.

• Remove the battery when the

product is not used for a long

time.

• The product shall not exposed to

dripping or splashing.

• Do no place any source of danger

on the product (e.g. liquid lled

objects. lit candles).

• Where the MAINS plug or an

appliance coupler is used as the

disconnect device, the disconnect

device shall remain readily

operable.

3EN

Notice

Any changes or modications made

to this device that are not expressly

approved by Gibson Innovations may

void the user’s authority to operate the

equipment.

Compliance

Hereby, Gibson Innovations declares

that this product is in compliance with

the essential requirements and other

relevant provisions of Directive 2014/53/

EU. You can nd the Declaration of

Conformity on www.philips.com/

support.

Care of the environment

Disposal of your old product and

battery

Your product is designed and

manufactured with high quality

materials and components, which can

be recycled and reused.

This symbol on a product means that

the product is covered by European

Directive 2012/19/EU.

This symbol means that the product

contains batteries covered by European

Directive 2013/56/EU which cannot be

disposed of with normal household

waste.

Inform yourself about the local separate

collection system for electrical and

electronic products and batteries.

Follow local rules and never dispose of

the product and batteries with normal

household waste. Correct disposal

of old products and batteries helps

prevent negative consequences for the

environment and human health.

Removing the disposable batteries

To remove the disposable batteries, see

battery installation section.

Environmental information

All unnecessary packaging has been

omitted. We have tried to make the

packaging easy to separate into three

materials: cardboard (box), polystyrene

foam (buer) and polyethylene (bags,

protective foam sheet.)

Your system consists of materials

which can be recycled and reused

if disassembled by a specialized

company. Please observe the local

regulations regarding the disposal

of packaging materials, exhausted

batteries and old equipment.

The Bluetooth® word mark and logos

are registered trademarks owned by

Bluetooth SIG, Inc. and any use of such

marks by Gibson Innovations is under

license.

The making of unauthorized copies

of copy-protected material, including

computer programs, les, broadcasts

and sound recordings, may be an

infringement of copyrights and

constitute a criminal oence. This

equipment should not be used for such

purposes.

4 EN

Care for your product

• Do not insert any objects other than

discs into the disc compartment.

• Do not insert warped or cracked

discs into the disc compartment.

• Remove the discs from the disc

compartment if you are not using

the product for an extended period

of time.

• Only use microber cloth to clean

the product.

This apparatus includes this label:

Note

•

The type plate is located on the back of the

product.

2 Your Micro

Music System

Congratulations on your purchase, and

welcome to Philips! To fully benet from

the support that Philips oers, register

your product at www.philips.com/

support.

Introduction

With this unit, you can:

• enjoy audio from discs, USB

devices, Bluetooth devices, and

other external devices;

• listen to FM radio stations.

The unit supports these media formats:

What's in the box

Check and identify the contents of your

package:

• Main unit

• Remote control (with one AAA

battery)

• Speaker boxes (×2)

• Printed materials

5EN

a IR sensor

b LED indicator

• Standby indicator: turns red

when this product is switched to

standby.

• Bluetooth indicator: turns

blue to indicate the Bluetooth

connection status.

• Switch this product on or to

standby.

• Connect USB storage devices.

• Open or close the disc

compartment.

f Disc compartment

g Volume knob

• Adjust volume.

h Display panel

• Show current status.

Overview of the main unit

AUDIO IN

6 EN

• Press to select a source: DISC,

USB, TUNER, AUDIO IN, BT.

• In Bluetooth mode, press and

hold for more than 2 seconds

to disconnect the currently

connected device and enter

pairing mode.

• Start or pause play.

• Stop play.

• Erase a program.

• Skip to previous/next track.

• Search within a track/disc.

• Tune to a radio station.

• Adjust time.

k antenna

• Improve FM radio reception.

• Connect external audio devices.

socket

• Connect with the speakers.

Overview of the remote

control

• Switch this product on or to

standby.

• Select CD source.

• Select FM source.

• Skip to the previous/next track.

• Search within a track/disc/USB.

7EN

• Tune to a FM station.

• Adjust time.

• Select shue mode to play

tracks randomly.

• Select repeat mode to play a

track or all tracks repeatedly.

• Select a preset radio station.

• Skip to previous/next album.

• Display playback information.

• Set sleep timer.

• Set alarm timer.

• Set the clock.

• View clock information.

• In standby, press and hold to

toggle clock display on or o.

• Program tracks.

• Program radio stations.

• Auto store radio stations.

• Mute or restore volume.

• Select a preset sound eect.

m +/- (volume)

• Adjust volume.

• Adjust display brightness.

• Stop play or erase a program.

• Press to start, pause, or resume

play.

• Select USB source.

• Select AUDIO IN source.

• Select Bluetooth source

• In Bluetooth mode, press and

hold for more than 2 seconds

to disconnect the currently

connected device and enter

pairing mode.

8 EN

3 Get started

Caution

•

Use of controls or adjustments or

performance of procedures other than

herein may result in hazardous radiation

exposure or other unsafe operation.

Always follow the instructions in this

chapter in sequence.

Connect speakers

Note

•

Insert the stripped portion of each speaker

wire into the socket completely.

• For better sound quality, use the supplied

speakers only.

1 For the right speaker, nd the

sockets on the back of the main unit

marked "R".

2 Insert the red wire into the red (+)

socket, and the black wire into the

black (-) socket.

3 For the left speaker, nd the sockets

on the main unit marked "L".

4 Repeat step 2 to insert the left

speaker wire.

To insert each speaker wire:

1 Hold down the socket ap.

2 Insert the speaker wire fully.

3 Release the socket ap.

AUDIO IN

FM ANT

Connect power

Caution

•

Risk of product damage! Ensure that the

power supply voltage corresponds to

the voltage printed on the back or the

underside of the unit.

• Risk of electric shock! Before you plug the

AC power cord, make sure that the plug is

xed securely. When you unplug the AC

power cord, always pull the plug, never pull

the cord.

• Before you connect the AC power cord,

make sure that you have completed all the

other connections.

AUDIO IN

FM ANT

Connect the power cable to the wall

socket.

9EN

Prepare the remote

control

Caution

•

Risk of product damage! When the remote

control is not used for long periods, remove

the batteries.

• Batteries contain chemical substances, so

they should be disposed of properly.

To insert the remote control battery:

1 Open the battery compartment.

2 Insert the supplied AAA battery with

correct polarity (+/-) as indicated.

3 Close the battery compartment.

Power on

Press .

» The product switches to the last

selected source.

Switch to standby mode

Press again to switch the product to

standby with no clock display, or to

standby with clock display.

» The red standby indicator lights up.

• In standby, you may press and hold

to toggle clock display on

or o.

Note

•

The product switches to standby mode

after 15 minutes inactive.

• To achieve the ecient energy saving

performance, unplug any external

electronic device from the USB port when

the device is not in use.

Set the clock

In power on mode, press and hold

CLOCK for more than 2 seconds to

enter the clock setting mode.

or is displayed.

2 Press / to select 24H or 12H

hour format, and then press

» The hour digits begin to blink.

3 Press / to set the hour, and

then press

» The minute digits begin to blink.

4 Press / to set the minute, and

then press

» The clock is set.

Note

•

To view clock in power on mode, press

briey .

• In standby, you may press and hold

to toggle clock display on or o.

• If clock display is turned on in standby,

power consumption increases.

10 EN

4 Play

Play from disc

Press to select CD source.

2 Press to open the disc

compartment.

3 Insert a disc with the label side up.

4 Press to close the disc

compartment.

» Play starts automatically. If not,

press

BTM2560

BTM2585

Play from USB

Note

•

Make sure that the USB device contains

playable audio content.

1 Insert a USB device into the

socket.

2 Press to select the USB source.

» Play starts automatically. If not,

press

BTM2560

BTM2585

Control play

Start, pause, or resume play.

Stop play.

/ Select an album or a folder.

/ Press to skip to the previous

or next track.

Press and hold to search

backward/forward within a

track.

Play a track or all tracks

repeatedly.

Play tracks randomly.

Increase or decrease the

volume.

Mute or unmute sound.

Select a preset sound

equalizer.

Adjust display brightness.

Show playback information.

Skip tracks

For :

Press

/ to select tracks.

11EN

For MP3 disc and USB:

1 Press / to select an album or a

folder.

2 Press / to select a track or a

le.

Program tracks

This function allows you to program

20 tracks in the desired sequence.

1 In stop mode, press to

activate the program mode.

is displayed.

2 For MP3 tracks, press / to select

an album.

3 Press / to select a track, and

then press

to conrm.

4 Repeat steps 2 to 3 to program

more tracks.

5 Press to play the programmed

tracks.

To erase the program

Press

twice.

Play from Bluetooth-

enabled devices

Note

•

Compatibility with all Bluetooth devices is

not guaranteed.

• Any obstacle between the unit and the

device can reduce the operational range.

• The eective operation range between this

unit and your Bluetooth enabled device is

approximately 10 meters (30 feet).

• The unit can memorize up to 8 previously

connected Bluetooth devices.

Philips BTM2560

Philips BTM2585

BTM2560

BTM2585

1 Press to select the Bluetooth

source.

(Bluetooth) is displayed.

» The Bluetooth indicator ashes

blue.

2 On your device that supports

Advanced Audio Distribution Prole

(A2DP), enable Bluetooth and

search for Bluetooth devices that

can be paired (refer to the user

manual of the device).

3 Select “Philips BTM2560” or

“Philips BTM2585” on your

Bluetooth enabled device and

if necessary input '0000' as the

paring password.

• If you fail to search for

“Philips BTM2560/2585” or

cannot pair with this product,

press and hold

for

more than 2 seconds to enter

pairing mode.

» After successful pairing and

connection, the Bluetooth

indicator turns solid blue, and

the unit beeps twice.

12 EN

4 Play audio on the connected

device.

» Audio streams from your

Bluetooth enabled device to this

product.

To disconnect the Bluetooth-enabled

device:

• Deactivate Bluetooth on your

device.

• Press and hold

for

2 seconds to enter pairing mode.

5 Listen to FM

radio

Tune to a radio station

Tip

•

Position the antenna as far as possible

from TV, or other radiation source.

• For optimal reception, fully extend and

adjust the position of the antenna.

1 Press to select FM source.

2 Press and hold / for more

than 2 seconds.

» The radio tunes to a station with

strong reception automatically.

3 Repeat step 2 to tune to more

stations.

To tune to a weak station:

Press

/ repeatedly until you nd

optimal reception.

Store radio stations

automatically

Note

•

You can store a maximum of 20 FM radio

stations.

1 Press to select FM source.

2 Press and hold for

more than 2 seconds.

» All available stations are

programmed in the order of

waveband reception strength.

» The rst programmed

radio station is broadcast

automatically.

13EN

Store radio stations

manually

Tune to an FM radio station.

2 Press to activate

program mode.

] is displayed.

3 Press / to allocate a number

from 1–20 to this radio station, and

then press

to conrm.

4 Repeat steps 1-3 to program more

stations.

Note

•

To overwrite a programmed station, store

another station in its place.

Select a preset radio

station

In FM mode, press / to select a

preset number.

6 Adjust sound

The following operations are applicable

to all supported media.

Select a preset sound

eect

• Press repeatedly to select a

preset sound eect.

Adjust volume level

• On the remote control, press

(volume) repeatedly.

• On the main unit, rotate the volume

knob.

Mute sound

• Press to mute or unmute the

sound.

14 EN

7 Other features

Set the alarm timer

This product can be used as an alarm

clock. You can select the disc, radio, or

.mp3 les on a USB storage device as

alarm source.

Note

•

Alarm timer is not available in AUDIO IN

mode.

• If CD/USB source is selected, but no disc is

placed or no USB device is connected, the

radio source is selected automatically.

1 Make sure that you have set the

clock.

2 In standby, press and hold

for more than 2

seconds.

» The hour digits blink.

3 Press / repeatedly to set the

hour, and then press

to conrm.

» The minute digits blink.

4 Press / to set the minute,

and then press

conrm.

» The last selected alarm source

blinks.

5 Press / to select an alarm

source (disc, USB or FM radio),

and then press

conrm.

» XX blinks (XX indicates the

volume level of alarm).

6 Press / to set the alarm

volume, and then press

to conrm.

Activate/deactivate alarm timer

In standby mode, press

repeatedly to activate or deactivate

timer.

» If timer is activated,

is displayed.

• In standby, you may press and hold

to toggle clock display on

or o.

Set the sleep timer

This music system can switch to

standby automatically after a set period

of time.

• When the music system is turned

on, press

repeatedly

to select a set period of time (in

minutes).

» When sleep timer is activated,

is displayed.

To deactivate sleep timer

• Press

repeatedly

until

(sleep o) is displayed.

» When sleep timer is deactivated,

disappears.

Listen to an external

device

You can listen to an external device

through this unit with an MP3 link cable.

1 Connect an MP3 link cable (not

supplied) between:

•

jack (3.5 mm) on the

product,

• and the headphone jack on an

external device.

2 Press repeatedly to select

AUDIO IN source.

3 Start to play the device (see the

device user manual).

15EN

AUDIO IN

FM ANT

AUDIO IN

BTM2560

BTM2585

Charge your devices

With this micro music system, you can

charge your external devices, such as

your cell phone, MP3 player or other

mobile devices.

1 Use a USB cable to connect the

USB socket of this product with the

USB socket of your devices.

2 Connect the product to power.

» Once the device is recognized,

the charging starts.

Note

•

Compatibility of this product with all

devices is not guaranteed.

16 EN

8 Product

information

Note

•

Product information is subject to change

without prior notice.

Specications

• Rated output power (Amplier):

• BTM2560: Total 70W (max.)

• BTM2585: Total 80W (max.)

• Acoustic frequency response:

66Hz - 20KHz

• Speaker driver: 2 x 4” woofer range,

8Ω; 2 x

20 tweeter range, 8Ω

• Bass enhancement: 2 x bass port

• Support disc type: CD-DA, CD-R,

CDRW, MP3-CD (8/12 cm)

• Bluetooth version: V2.1 + EDR

• Bluetooth supported proles:

A2DP V1.2, AVRCP V1.0

• Bluetooth frequency band / Output

power: 2.402GHz

2.480GHz ISM

Band / ≤ 4dBm (Class 2)

• USB playback:

• Type A, USB Direct 2.0, 5V / 1A ,

MSC le format, FAT 16/32,

• Support USB up to 32G

• USB charging:

2A max (Standby); 500mA max

(USB source); 1A max (BT/Radio/

CD/Audio in source)

* Actual charging current depends

on the mobile devices.

• Tuner frequency range:

FM 87.5-108MHz

• Preset stations: 20

• AUDIO IN input level:

600mV ±100mV RMS

• Power: 100 - 240V , 50/60 Hz

(AC Input)

• Operation power consumption:

45W

• Bluetooth standby power

consumption: < 2W

• Standby power consumption:

< 0.5W (clock display o)

• Dimensions (W x H x D):

220 x 104 x 242 mm (Main unit);

140 x 263 x 183 mm (Speaker box)

• Weight: 1.7 kg (Main unit);

2 x 1.76 kg (Speaker box)

USB playability

information

Compatible USB devices:

• USB ash memory (USB2.0 or

USB1.1)

• USB ash players (USB2.0 or USB1.1)

• memory cards (requires an

additional card reader to work with

this unit)

Supported USB formats:

• USB or memory le format: FAT12,

FAT16, FAT32 (sector size: 512 bytes)

• MP3 bit rate (data rate): 32-

320 Kbps and variable bit rate

• Directory nesting up to a maximum

of 8 levels

• Number of albums/ folders:

maximum 99

• Number of tracks/titles: maximum

999

• File name in Unicode UTF8

(maximum length: 32 bytes)

Unsupported USB formats:

• Empty albums: an empty album

is an album that does not contain

MP3/WMA les, and will not be

shown in the display.

17EN

• Unsupported le formats are

skipped. For example, word

documents (.doc) or MP3 les with

extension .dlf are ignored and not

played.

• WMA, AAC, WAV, PCM audio les

• DRM protected WMA les (.wav,

.m4a, .m4p, .mp4, .aac)

• WMA les in Lossless format

Supported MP3 disc

formats

• ISO9660, Joliet

• Maximum title number: 128

(depending on le name length)

• Maximum album number: 99

• Supported sampling frequencies:

32 kHz, 44.1 kHz, 48 kHz

• Supported Bit-rates: 32

256 (kbps),

variable bit rates

9 Troubleshooting

Warning

•

Never remove the casing of this device.

To keep the warranty valid, never try to

repair the system yourself.

If you encounter problems when using

this device, check the following points

before requesting service. If the problem

remains unsolved, go to the Philips Web

page (www.philips.com/support). When

you contact Philips, make sure that the

device is nearby and the model number

and serial number are available.

No power

• Make sure that the AC power cord

of the device is connected properly.

• Make sure that there is power at the

AC outlet.

• As a power-saving feature, the

system switches o automatically

15 minutes after track play reaches

the end and no control is operated.

No sound or poor sound

• Adjust the volume.

• Check that the speakers are

connected correctly.

• Check if the stripped speaker wires

are clamped.

No response from the unit

• Disconnect and reconnect the AC

power plug, then turn on the unit

again.

• As a power-saving feature, the

system switches o automatically

15 minutes after track play reaches

the end and no control is operated.

Remote control does not work

• Before you press any function

button, rst select the correct

18 EN

source with the remote control

instead of the main unit.

• Reduce the distance between the

remote control and the unit.

• Insert the battery with its polarities

(+/– signs) aligned as indicated.

• Replace the battery.

• Aim the remote control directly at

the sensor on the front of the unit.

No disc detected

• Insert a disc.

• Check if the disc is inserted upside

down.

• Wait until the moisture

condensation at the lens has

cleared.

• Replace or clean the disc.

• Use a nalized CD or correct format

disc.

Cannot display some les in USB

device

• The number of folders or les in the

USB device has exceeded a certain

limit. This phenomenon is not a

malfunction.

• The formats of these les are not

supported.

USB device not supported

• The USB device is incompatible

with the unit. Try another one.

Poor radio reception

• Increase the distance between the

unit and your TV or other radiation

sources.

• Fully extend the radio antenna.

Music playback is unavailable on this

unit even after successful Bluetooth

connection.

• The device cannot be used to play

music through this unit wirelessly.

The audio quality is poor after

connection with a Bluetooth-enabled

device.

• The Bluetooth reception is poor.

Move the device closer to this unit

or remove any obstacle between

them.

Bluetooth cannot be connected with

this unit.

• The device does not support the

proles required for this unit.

• The Bluetooth function of the

device is not enabled. Refer to the

user manual of the device to nd

out how to enable the function.

• This unit is not in pairing mode.

• This unit is already connected with

another Bluetooth-enabled device.

Disconnect that device and then try

again.

The paired mobile device connects and

disconnects constantly.

• The Bluetooth reception is poor.

Move the device closer to this unit

or remove any obstacle between

them.

• Some mobile phones may connect

and disconnect constantly when

you make or end calls. This does

not indicate any malfunction of this

unit.

• For some devices, the Bluetooth

connection may be deactivated

automatically as a power-saving

feature. This does not indicate any

malfunction of this unit.

Timer does not work

• Set the clock correctly.

• Switch on the timer.

Clock/timer setting erased

• Power has been interrupted or the

power cord has been disconnected.

• Reset the clock/timer.

19EN

How to keep clock display on or o in

standby?

• In standby, press and hold

to toggle clock display on or o.

Page is loading ...

Philips BTM2560 User manual

Brand: Philips

Model: BTM2560

Category: Home audio sets

Type: User manual

This manual is also suitable for

Download PDF

report

Philips BTM2560 User manual

This manual is also suitable for

Philips BTM2560 User manual

Related papers

Other documents