Atlona AT-ANC-108D Installation guide

AT-ANC-108D
Atlona
Brand
Atlona
Model
AT-ANC-108D
Type
Installation guide

Atlona AT-ANC-108D is an 8-button network control panel for Atlona IP-based switchers, designed for easy configuration using the free Atlona Management System (AMS) software. It simplifies AV system control by sending IP commands to compatible switchers, which in turn control connected devices like displays. With PoE (Power over Ethernet) support, it requires only a single cable for both power and control, reducing installation time and clutter. Its compact design fits into a standard US 1-gang junction box, and it comes with a Decora-style face plate for a sleek and professional look.

Atlona AT-ANC-108D is an 8-button network control panel for Atlona IP-based switchers, designed for easy configuration using the free Atlona Management System (AMS) software. It simplifies AV system control by sending IP commands to compatible switchers, which in turn control connected devices like displays. With PoE (Power over Ethernet) support, it requires only a single cable for both power and control, reducing installation time and clutter. Its compact design fits into a standard US 1-gang junction box, and it comes with a Decora-style face plate for a sleek and professional look.

atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
The Atlona AT-ANC-108D is an 8-button network control panel for Atlona IP-based switchers. It is designed
for easy configuration using the free Atlona Management System (AMS) software resource. Only one
category cable needs to be connected to the AT-ANC-108D ensuring fast, hassle-free installation of control
signal and power. Configuration is also fast. Simply download a configuration file from within AMS for
Atlona single output switchers such as the HDVS Series, SW-5 Series, AT-UHD-CLSO-601, or AT-UHD-
CLSO-612ED. Combined with Atlona IP-controllable switching products for huddle spaces, classrooms and
conference rooms, the network control panel acts as a remote control to send IP commands to the switcher.
The switcher in turns acts on those commands or translates the IP commands into RS-232 commands to
control external devices such as displays to create a seamless AV system. The AT-ANC-108D fits into a US
1-gang junction box and is compatible with Decora-style wall plates.
• 1 x Unit
• 1 x Installation guide
• 1 x Decora face plate
• 1 x Blank button template
• 1 x Predefined button template
Package Content
8-Button Network Control Panel
AT-ANC-108D Installation Guide
Please check http://www.atlona.com/product/AT-ANC-108D
for the most recent firmware update or manual.
2
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Panel Descriptions
DC 5V
+
-
2
3
4
5
1
1. Buttons - Preprogrammed buttons to control connected Atlona device
2. LAN port - Connect network switch or router for device control
Note: Connect a PoE switch or injector to provide power to the unit without the need for a 5V power supply
3. DC 5V - Connect optional 5V power supply to this port (purchasable at atlona.com)
4. Mini USB - Used for manually updating, if needed
5. Reset button - Used to reset the unit, in case of lock ups or loss of signal.
Captive Screw
The captive screw connectors allow you to cut cables to a suitable length, reducing cable clutter
while providing a more reliable connection.
Connecting
The captive screw connectors have
a contact bar that is adjusted to
compress the wire against the top
contact plate. Use the screws at the
top of the connector to compress
the wire against the contact plate.
When connecting the cables to the female captive screw connector it is important that the wires be
terminated correctly. The female captive screw connector has a contact plate at the top and must
have the wires touching it for signal to pass. When wired correctly (see picture A) the signal will pass,
incorrectly (see picture B) no signal will pass.
A female captive screw power
connector is included with the
optional power supply
(see picture 1)
The power cable
(picture 2) will have
exposed wires. Each
wire is encased in
a different colored
cover.
1
Power
Clockwise
Counter
Clockwise
Turn the screws clockwise to
raise the contact bar to the
upper contact plate and hold
the wires in place.
Turn the screws counter
clockwise to lower the
contact bar to release the
wires.
A
B
Black: - White: +
- +
2
3
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Mounting
The ANC-108D is a 1-gang wall plate. To install the unit, simply connect the Ethernet cable to the
unit, place the unit in the back box, and use the two wall plate screws to secure the unit to the
box.
Ethernet
For convenience, the ANC-108D comes with DHCP on. This enables the switcher to be connected
to a network without knowing available IP addresses.
AMS
For simple and complete control, the ANC-108D is supported by the AMS. Follow the AMS
installation and discovery instructions found within the AMS manual.
To download AMS, go to http://atlona.com/product/at-sw-ams/
To get to the log in screen of AMS: type localhost:8080 into the web browser on the computer AMS is
running on. It will go straight to the log in for AMS.
A login screen will appear (this is the same log in for admin and general users). For the first log in
the username is “admin” and password is “admin123”.
Once the installation and discovery are finished (see AMS manual for instructions), the device will be
found within the Domain View. Select the ANC-108D from the devices to control and view the
device GUI. (Device is highlighted in the picture above)
Note: For full configuration instructions, the manual can be found at http://www.atlona.com/product/AT-ANC-108D
4
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Connection Diagram
1 2
3
4
HDMI IN
AT-UHD-CLSO-612ED
RS-232 RS-232
POWER 1 2 3 4 5 6 ENTER MUTE
VOLUME
>
<
<
<
MENU
AUDIO INMIC/LINE IN
5 6
HDBaseT IN
VGA IN HDMI OUT
HDBaseT OUT
INPUT FUNCTION
1
2
5 6 7L R
5
L R
6
TX TXRX RX
TXRX
RS-232
OUT
MASTER
IN
L R
TXRX
RS-232
TXRX
RS-232
TXRX
-
+
-
+
-
+
AUDIO IN
-
+
-
+
AUDIO OUT
-
+
-
+
P
S
S
48V
MIC
LINE
DC 48V
-
+
FW
LAN
RS-232
RX TX
IR IN
S
IR OUT
S
HDBaseT OUT
ETHERNET
HDMI IN
FW
DC 48V
LINK
POWER
AT-UHD-EX-100CE-TX
-
+
FW
LINK
POWER
AT-UHD-EX-100CE-RX
RS-232
RX
TX
IR IN
P
S
IR OUT
S
HDBaseT IN
ETHERNET
HDMI OUT
USB
LAN 2
2
1
2
1
16
15
PDU 2 Modem
SETUP
PDU 1LAN 1
PWR
MUTE
VOL +
INPUT 1
INPUT 2
INPUT 3
INPUT 4
DC 5V
+
-
VOL -
AT-UHD-EX-100CE-TX
Set Top Box
Laptop
PoE Switch
Display
Display
VCR
AT-UHD-EX-100CE-RX
AT-UHD-CLSO-612ED
AT-ANC-108D
Video
Audio
HDBaseT
Control
Troubleshooting
1. Why am I receiving no power when I connect my 108D to a network switch?
The 108D requires a PoE connection. Check to make sure the switch is PoE capable or
connect a PoE injector to provide power to the unit.
2. Why is a red X showing up on my 108D in AMS?
When the 108D is linked to another product it may temporarily lose connection. Manually
ping the device within AMS or wait 1 or 2 minutes for AMS to automatically ping the 108D
3. Why is my device not connecting with the AMS?
The 108D may have locked up. Manually reset the unit, by removing the Decora wallplate
and pressing the small reset button below the mini USB port.
MIC
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Atlona AT-ANC-108D Installation guide

AT-ANC-108D
Atlona
Brand
Atlona
Model
AT-ANC-108D
Type
Installation guide

Atlona AT-ANC-108D is an 8-button network control panel for Atlona IP-based switchers, designed for easy configuration using the free Atlona Management System (AMS) software. It simplifies AV system control by sending IP commands to compatible switchers, which in turn control connected devices like displays. With PoE (Power over Ethernet) support, it requires only a single cable for both power and control, reducing installation time and clutter. Its compact design fits into a standard US 1-gang junction box, and it comes with a Decora-style face plate for a sleek and professional look.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents