Griffin Technology Survivor Slim Owner's manual

Griffin Technology
Brand
Griffin Technology
Model
Survivor Slim
Type
Owner's manual

This manual is also suitable for

Griffin Technology Survivor Slim for iPad Air

This product is a protective case designed for iPad Air. It passed rigorous quality testing designed to simulate real-world conditions that may cause harm, ensuring superior protection from impacts, scratches, and dust. The case is easy to install, and to open you simply need to fold out the stand until it clicks into place. To close the case, press the locking tab to release and fold shut. To remove the iPad from the case, press out and down the top corners of the case to loosen the device, and repeat on the second adjacent corner.

Griffin Technology Survivor Slim for iPad Air

This product is a protective case designed for iPad Air. It passed rigorous quality testing designed to simulate real-world conditions that may cause harm, ensuring superior protection from impacts, scratches, and dust. The case is easy to install, and to open you simply need to fold out the stand until it clicks into place. To close the case, press the locking tab to release and fold shut. To remove the iPad from the case, press out and down the top corners of the case to loosen the device, and repeat on the second adjacent corner.

ALERT: No case is indestructible and we do not warrant that this case will protect your device in all circumstances. Failure to follow all installation, maintenance,
and operating instructions while using this case may cause damage to your device. Griffin cannot be held liable or responsible for any damages, malfunctions, or
destruction of a user’s device. UNDER NO CIRCUMSTANCES WILL GRIFFIN REPAIR OR REPLACE A DAMAGED DEVICE. Attention : Aucun étui n’est indestructible
et nous ne pouvons garantir que celui-ci protégera votre appareil en toutes circonstances. Utiliser cet étui sans avoir lu les instructions d’installation, d’entre-
tien et d’utilisation peut entraîner l’endommagement de votre appareil. Griffin rejette toute responsabilité en cas d'endommagement, de mauvais fonctionne-
ment ou de destruction de l’appareil d’un utilisateur. GRIFFIN N’EST EN AUCUN CAS TENU DE PROCÉDER À LA RÉPARATION OU AU REMPLACEMENT D’UN
APPAREIL ENDOMMAGÉ.
Starting at the top and working downward,
press on the edges of the frame in the 12 spots
shown above to snap locking tabs into place.
FR | En partant du haut vers le bas, appuyez sur
les bords du cadre aux 12 endroits indiqués
ci-dessus pour attacher les pattes de fixation.
Press out and down the top corners of the case to loosen the device. Repeat on second
adjacent corner. The tablet should now easily remove.
FR| Appuyez sur l’un des coins supérieurs de l’étui comme indiqué pour dégager l’appareil.
Faites de même sur le coin adjacent. L’appareil devrait alors s’extraire facilement.
CASE-01579© 2014 Griffin Technology Inc.
1
2
3
TO INSTALL
FR | INSTALLATION
1
2
TO REMOVE
FR | EXTRACTION
1 2
3 4
5 6
7 8
9 10
11 12
STAND
TO OPEN: Fold out the stand
until it clicks into place.
FR | POUR OUVRIR: dépliez le
support jusqu’à ce qu’il se fixe
en place
TO CLOSE: Press the locking tab
to release, and fold shut.
FR | POUR FERMER: appuyez sur
la patte de fixation pour la libérer
et repliez
griffintechnology.com/survivor
WHICH OTHER SURVIVOR PRODUCTS ARE RIGHT FOR YOU?
Sleek, layered
drop protection.
Colorful, fun
drop protection.
Minimalist design.
Tough in the corners.
The one that started
it all. Mil-spec tested.
Real-world proven.
A variety of protective
cases for tablets.
FOR TABLETS
  • Page 1 1

Griffin Technology Survivor Slim Owner's manual

Griffin Technology
Brand
Griffin Technology
Model
Survivor Slim
Type
Owner's manual
This manual is also suitable for

Griffin Technology Survivor Slim for iPad Air

This product is a protective case designed for iPad Air. It passed rigorous quality testing designed to simulate real-world conditions that may cause harm, ensuring superior protection from impacts, scratches, and dust. The case is easy to install, and to open you simply need to fold out the stand until it clicks into place. To close the case, press the locking tab to release and fold shut. To remove the iPad from the case, press out and down the top corners of the case to loosen the device, and repeat on the second adjacent corner.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents