Salora PA2210CD Owner's manual

Elite 2

INSTRUCTION MANUAL

Before operating the unit, please read this manual thoroughly and retain it for future reference.

GEBRUIKSAANWIJZING

Gelieve deze gebruiksaanwijzing te lezen alvorens het toestel te gebruiken. Bewaar hem voor

later gebruik.

MANUEL D’UTILISATION

Veuillez lire ce manuel d’utilisation avant d’utiliser l’appareil et gardez-le pour consultation

ultérieure.

1

CONTENTS

SAFETY AND CAUTION ........................................................................................................................... 2

OVERVIEW ................................................................................................................................................ 3

POWER SUPPLY ...................................................................................................................................... 5

GENERAL FUNCTIONS ........................................................................................................................ 7

TIME SETTING ........................................................................................................................................ 8

TUNER MODE ........................................................................................................................................ 9

CD MODE ................................................................................................................................................ 12

SD CARD AND USB MODE ............................................................................................................... 15

AUXILIARY INPUT MODE .................................................................................................................... 16

ALARM FUNCTION .............................................................................................................................. 17

SLEEP FUNCTION .............................................................................................................................. 18

REMINDER FUNCTION ....................................................................................................................... 18

INFORMATION ........................................................................................................................................ 19

2

SAFETY AND CAUTION

To ensure that the device provides you with long-term satisfaction and enjoyment, please observe the

following instructions.

 This device is connected to the mains with the AC cord. To completely disconnect the power input,

pull out the mains plug of the device from the mains.

 The device and the mains plug should not be obstructed or should be easily accessed during

intended use.

 It is recommended to avoid using or storing the device at extremes of temperature. Only use the

device in moderate climates.

 The device and the mains plug should not be exposed to water (dripping or splashing), steam, heat

(heater or direct sunlight) and sand.

 No objects ﬁlled with liquids such as vases, and no naked ﬂame sources such as lighted candles

shall be placed on the device.

 It is recommended minimum 10cm distances around the device for sufﬁcient ventilations.

 The ventilation should not be impeded by covering the ventilation openings with items such as

newspaper, tablecloths, curtains etc.

 In case of malfunctions occur due to electrostatic discharge; reset the unit by reconnecting the

power source to resume normal functions or press the Reset button at the back of the device.

3

OVERVIEW

MAIN UNIT

Keys & Controls on the Top

1. Disc window -

2. IR sensor Receive signal from the remote control.

3. Display -

4. Standby LED indicator Light on when the device is in standby mode.

5. On/Off Switches the unit to and from standby mode.

The unit is fully disconnected from the mains after the plug has

been pulled out.

6. Function Selects the FM Tuner, MW Tuner, CD, SD CARD, USB and

Auxiliary Input modes.

7. DSC/UBS Brieﬂy press to select the sound setting.

Press and hold down to activate and deactivate the Ultra Bass System.

8. Sleep Sets the sleep timer.

9. Play/Pause In CD, SD CARD and USB mode: Plays and pauses the playback.

In Tuner mode: Calls up the station types.

10. Stop In CD, SD CARD and USB mode: Stops the playback.

In FM Tuner mode: Selects Stereo or Mono reception.

11. Rewind / Tuning Down In Tuner mode: Searches station backwards.

In CD, SD CARD and USB mode: Selects ﬁles or tracks;

Searches backwards for a particular passage in a ﬁle or track.

12. Memory Down / Album Down

In Tuner mode: Selects stored radio stations.

13. Memory Up / Album Up

In CD, SD CARD and USB mode: Selects albums.

14. Forward / Tuning Up In Tuner mode: Searches station forwards.

In CD, SD CARD and USB mode: Selects ﬁles or tracks;

Searches forwards for a particular passage in a ﬁle or track.

15. Mute / Snooze Interrupts the alarm function or the reminder timer.

Switches the speakers to and from mute mode.

16. Volume Down Adjusts the volume.

17. Volume Up -

18. Open Open and Close the CD compartment door.

1 2 3

5

4

7

6 8

10

9

12

11

14

13

15 17

16 18

4

OVERVIEW

MAIN UNIT

Keys & Controls on the Front

19. Headphone socket For connecting headphone or earpiece with 3.5mm plug.

The loud speakers of the hi-ﬁ system are automatically switched off.

20. USB socket For connecting the USB memory device.

21. SD Card socket For inserting the SD or SDHC card.

Keys & Controls on the Rear

20 21

19

22 23 24 25 26

22. AC socket For connecting the power supply unit.

The only way to fully disconnect the hi-ﬁ system from the mains is to pull

out the plug.

23. Auxiliary Input socket Audio signal input for connecting an external device.

24. Reset Reset the device in case of malfunctions occur due to electrostatic discharge

25. FM Antenna socket Antenna socket for connecting the wire antenna supplied or the outdoor

antenna cable.

26. MW Antenna connector Clip connectors for connecting the MW loop antenna supplied.

5

OVERVIEW

REMOTE CONTROL

Keys & Controls

1. On/Off Switches the unit to and from standby mode.

The unit is fully disconnected from the mains after the plug has been pulled out.

2. Function Selects the FM Tuner, MW Tuner, CD, SD CARD, USB and Auxiliary input sources.

3. WEC Activates and deactivates the weekend cancellation function for alarm.

4. Play/Pause / PTY In CD or SD mode: Plays and pauses the playback.

In Tuner mode: Calls up the station types.

5. Rewind In Tuner mode: Searches station backwards.

In CD, SD CARD and USB mode: Selects ﬁles or tracks; Searches

backwards for a particular passage in a ﬁle or track.

6. Down In Tuner mode: Selects stored radio stations.

In CD, SD CARD and USB mode: Selects albums.

7. Sleep Sets the sleep timer.

8. Volume Up

Adjusts the volume level.

9. Volume Down

10. Dimmer Adjusts the intensity of the display.

11. Open Open and Close the CD compartment door.

12. DSC/UBS Brieﬂy press to select the sound setting.

Press and hold down to activate and deactivate the Ultra Bass System.

13. NAP Sets the reminder function.

14. Up In Tuner mode: Selects stored radio stations.

In CD, SD CARD and USB mode: Selects albums.

15. Forward In Tuner mode: Searches station forwards.

In CD, SD CARD and USB mode: Selects ﬁles or tracks; Searches forwards

for a particular passage in a ﬁle or track.

16. Stop / Stereo/Mono In FM Tuner mode: Selects Stereo or Mono reception.

In CD, SD CARD and USB mode: Stops the playback.

17. Display Switches to view information of the playing content.

18. Time / Prog. / Random In CD, SD CARD and USB mode: Programs the playback; Activates random

playback. Set the day and time.

19. Alarm / Int. / Repeat In CD, SD CARD and USB mode: Plays the introduction of each track;

Repeats the playback. Set the Alarm.

20. Snooze / Mute Interrupts the alarm function or the reminder timer.

Switches the speakers to and from mute mode.

9

8

7

3

2

1

6

5

4

18

17

13

14

11

10

16

15

12

19

20

6

POWER SUPPLY

Mains operation

Check if the mains voltage on the type plate (at the bottom of the device) corresponds to your local

mains supply. If not, consult your dealer or service organization.

1. Insert the power cord into the AC socket on the side of the device.

2. Plug the mains plug into the mains socket.

Caution:

In order to disconnect the device from the mains completely, the mains plug should be removed from the

mains socket completely.

Battery operation (Remote Control)

1. Open the battery compartment at the back of the remote control by pulling out the cover..

2. Insert two batteries (2 x 1.5V, Type R03 / UM4 / AAA size) with the correct polarity as shown in the

battery compartment.

3. Replace the cover.

4. If the remote is not to be used for any extended period of time, it is recommended that the batteries

are removed.

Caution:

Do not expose the batteries to excessive heat such as sunshine, ﬁre or the like.

Remove the batteries from the device when they will not be used for a long period of time.

Notes:

Batteries should not be disposed of by incineration and with household waste. Disposable batteries

should be taken to a suitable recycling centre if possible.

7

GENERAL FUNCTIONS

Switching the device on and off

1. Press the On/Off button to switch on the device from standby mode. The last function used is

automatically selected.

2. Switch the device to standby by pressing the On/Off button. The display shows ”GOOD BYE”

Adjusting the brightness of the display

1. Press the Dimmer button to adjust the brightness of display backlight in four levels (bright,

medium, low or off).

Notes:

Minimum power consumption in standby mode is only achieved if the display backlight is switched off.

Selecting the function mode

1. Repeatedly press the Function button to select the function between FM Tuner, MW Tuner, CD,

SD, USB and Auxiliary input modes.

Adjusting the volume

1. Adjusts the volume by pressing the Volume Down or Volume Up button.

Muting

1. Pressing the Mute button to switch the sound on and off. The display shows “Mute”.

Selecting the sound effects

You can select the sound settings USER, CLASSIC, POP, JAZZ and ROCK. The default setting is USER.

1. Repeatedly press the DSC/UBS button to select the desired sound setting.

Setting the equaliser and the Ultra Bass System (for USER sound setting)

The USER sound setting allows you to make your own personal equaliser settings.

1. Repeatedly press the DSC/UBS button to select the USER sound setting.

2. Press and hold the DSC/UBS button until “BASS 0” is shown on the display.

3. Set the value by using the Volume Down or Volume Up button.

4. Brieﬂy press the DSC/UBS button to switch to treble setting. “TRE 0” is shown on the display.

5. Set the value by using the Volume Down or Volume Up button.

6. Brieﬂy press the DSC/UBS button to switch to UBS setting. “UBS OFF” is shown on the display.

(The default is OFF.)

7. Switch the UBS on and off by using the Volume Down or Volume Up button.

Notes:

If you do not press any button within 5 seconds, the device will quit the setting.

Listening with UBS at high volume may have distortion. Recommend to use at low volume.

8

GENERAL FUNCTIONS

Switching the Ultra Bass System on and off

This function boosts the bass frequencies. You can follow the below procedure to switch on and off the

UBS when the sound setting is CLASSIC, POP, JAZZ or ROCK.

1. Press and hold the DSC/UBS button to switch the Ultra Bass System on and off.

Notes:

Listening with UBS at high volume may have distortion. Recommend to use at low volume.

Listening with headphones

1. Connect the headphones to the Headphone socket (Ø3.5mm).

– This switches off the loudspeakers.

Warning:

Excessive sound pressure from earphones and headphones can cause hearing loss.

TIME SETTING

In standby mode, when the time and day ﬂash on the display, this indicates that they need to be set.

Time setting may only be performed in standby mode.

1. Press the Time button to select the hour format between 12HR and 24HR.

2. Press and hold down the Time button until the hour digits ﬂash on the display.

3. Set the hour by using the Rewind or Forward button, and press the Time button to conﬁrm.

The minute digits ﬂash.

4. Use the Rewind or Forward button to set the minute, and then press the Time button to conﬁrm.

The day of week ﬂashes.

5. Set the day of week by using the Rewind or Forward button, and press the Time button to

conﬁrm.

“CT ON” ﬂashes on the display.

6. Use the Rewind or Forward button to set the RDS time synchronisation, press the Time button to

conﬁrm and ﬁnish the time setting.

Notes:

You must reset the time after a power failure or when the mains plug is pulled out.

Some RDS stations transmit an RDS time signal. If the selected RDS programme transmits this time

information, the time will be automatically updated. This may take a few minutes.

9

TUNER MODE

Connecting the antenna

1. Plug the wire antenna supplied or the outdoor antenna cable into the FM Antenna socket.

Fully extend the wire antenna for FM reception.

2. Insert the wires of the MW frame antenna supplied into the MW Antenna connector with the same

colour.

Adjust the position of the antenna to have better reception.

Notes:

The wires must be inserted into the connectors matched with the same colour; otherwise, no MW fre-

quency signal can be received.

Selecting the Tuner input source

1. Switch on the device by pressing the On/Off button

2. Press the Function button to select the input source, FM Tuner or MW Tuner.

Automatic station search

A radio station search starts automatically when you connect the device to the mains for the ﬁrst time.

The device searches for up to 40 stations (shared by FM and MW) with the best reception and stores

them as preset stations.

You can also start a new search to delete all the existing preset stations and replace them with new sta-

tions at the same time.

1. Start the automatic station search in tuner mode by pressing and holding the Prog. button.

After the search has ﬁnished, you will hear the station stored in preset position 1.

Notes:

The automatic station search can be interrupted by brieﬂy pressing the Stop button.

Automatic station search (one station)

You can search for a station without replacing the existing preset memory.

1. Press the Function button to select the frequency band, FM or MW.

2. Press and hold the Rewind or Forward button until the frequency display changes to rapid

run-through. The search will stop automatically when it ﬁnds a station with sufﬁcient strength.

3. When the end of the frequency band is reached, it will recommence searching from the opposite

end of the frequency band.

Notes:

The automatic station search can be interrupted by brieﬂy pressing the Stop button.

Manual station search

1. To move the frequency in step, brieﬂy press the Rewind or Forward button.

The frequency changes in steps of 50kHz (FM) or 9kHz (MW).

2. When the end of the frequency band is reached, it will recommence searching from the opposite

end of the frequency band.

10

TUNER MODE

Storing stations as presets

1. Press the Rewind or Forward button to select the station desired to store.

2. Press the Prog. button to activate the storing function. The preset position and “PROG” ﬂash on the

display.

3. Choose the desired preset position by using the Up or Down button.

4. Press the Prog. button to store the station.

5. To store more stations, repeat step 1 to 4.

Notes:

If stations are already stored in the preset positions, they are overwritten when new stations are stored.

If the device is disconnected from the mains for a period of time, all the preset stations are deleted.

Stereo / Mono reception

If the signal from the FM stereo is weak, you can improve the sound quality by switching to mono recep-

tion.

1. Press the Stereo/Mono button to switch to mono reception.

2. To switch back to FM stereo, press the Stereo/Mono button again.

Notes:

The mono or stereo setting is also saved when you store a station as preset.

11

TUNER MODE

RDS station service

RDS (Radio Data System) is an information system which inaudible digital information is transmitted in

addition to the normal FM radio programme. When the device is receiving a RDS station and the recep-

tion strength is sufﬁcient, the station name and “ ” appear in the display. It may take some time

before the RDS information is available.

RDS time synchronisation

Some RDS stations transmit a time signal. If reception is good, the time information will update the

time if you have selected the “CT ON” option during the time setting.

Time synchronisation can take several minutes, and even with good reception the accuracy

depends on the time signal being transmitted. The automatic time setting is always activated when

the device is switched from standby to tuner mode and receives a RDS station. When the device

is waiting for an RDS time signal, “ ” ﬂashes on the display. Once RDS time synchronisation

completes, “ ” keeps lighting.

Calling up RDS information

1. Repeatedly press the Display button to cycle through the information.

a. Station name Displays the name of the radio station being listened to.

b. Programme type Displays the type of station being listened to, e.g. Pop, Classic, News,

etc.

c. Text Displays the message about the station being listened to as ticker text.

d. Day and Time Displays the current time and day of the week.

e. Frequency Displays the waveband and the frequency of station being listened to.

Station types (PTY)

1. To call up the current station type, press the PTY button.

If no station type code is transmitted, “NO PTY” appears on the display.

2. Repeatedly press the PTY button to select the desired station type.

3. Press the Rewind or Forward button to start the station search by station type.

The search stops once a station of the selected type is found.

4. Press the PTY button to stop the search.

12

CD MODE

The device is suitable for music CDs displaying the logo shown here (CD-DA) and for

CD-Rs and CD-RWs with audio data or MP3 and WMA formats.

In MP3/WMA mode, the terms “album” and “ﬁle” are very important. “Album” cor-

responds to a folder on a PC, “ﬁle” to a ﬁle on a PC or CD-DA track. An MP3/WMA CD

may not contain more than 511 tracks/folders in total.

When burning CD-R and CD-RWs with audio ﬁles, various problems may arise which

could lead to problems with playback. This can be caused by faulty software or hardware settings or by

the CD being used. Should such problems arise, contact the customer services of your CD burner or

software manufacturer or look for relevant information, for example on the Internet. When you are mak-

ing audio CDs, observe all legal guidelines and ensure that the copyright of third parties is not fringed.

Always keep the CD compartment closed to prevent dust from collecting on the laser optics. Do not at-

tach adhesive labels to CDs. Keep the surfaces of CDs clean. You can play standard 12cm CDs as well

as 8cm CDs on the device. An adaptor is not necessary.

Selecting the CD input source

1. Press the Function button to select CD as the input source.

If there is no CD in the compartment, the display shows the message “NO DISC”. Otherwise, the

device scans the CD content.

Inserting a CD

1. Open the CD compartment by pressing the Open button. The display shows “OPEN”.

2. Insert a CD into the CD compartment with it printing facing outward.

3. Press the Open button to close the CD compartment. The device then reads the content of CD, and

the display shows “CD READ”

- In MP3/WMA mode: The display shows the total number of albums and ﬁles.

- In CD-DA mode: The display shows the total number of tracks and the total playing time.

CD playback

1. Press the Play/Pause button to start playback.

Playback always starts with the ﬁrst track (CD-DA) or the ﬁrst ﬁle of the ﬁrst album (MP3/WMA).

2. Press the Play/Pause button to pause the playback.

3. Press the Play/Pause button again to resume playback.

4. Press Stop button to end the playback.

Selecting a ﬁle or track

1. During playback, repeatedly press the Rewind or Forward button until the desired ﬁle or track is

reached. Playback of the selected ﬁle/track starts automatically.

–In MP3/WMA, you also can select the album by pressing the Up or Down button.

2. You can also select the ﬁles/tracks in the stop position. Press and hold Rewind or Forward button

to select the ﬁles/tracks more quickly.

13

CD MODE

Searching for a passage within a ﬁle or track

1. During playback, press and hold down the Rewind or Forward button until you ﬁnd the passage

you want to hear.

–Playback starts when you release the button.

–The volume is reduced during the search.

Repeating a ﬁle or track (Repeat One)

1. During playback, press the Repeat button, the display shows the symbol “ ”.

The current ﬁle/track will be played repeatedly.

2. To cancel this function, repeatedly press the Repeat button until the symbol “ ” disappears on

the display.

3. You may also press the Stop button to stop playback and quit the repeat function.

Repeating all ﬁles or tracks (Repeat All)

1. During playback, repeatedly press the Repeat button until the display shows a symbol “ ”.

The whole CD will be repeated.

2. To cancel this function, repeatedly press the Repeat button until the symbol “ ” disappears.

3. You may also press the Stop button to stop playback and quit the repeat function.

Repeating all ﬁles in an album (MP3/WMA only)

1. During playback, repeatedly press the Repeat button until the display shows a symbol “ ”.

All the ﬁles in the current album are played repeatedly.

2. To cancel this function, repeatedly press the Repeat button until the symbol “ ” disappears.

3. You may also press the Stop button to stop playback and quit the repeat function.

Playing the ﬁles or tracks in random order (Random)

1. During the playback, press the Random button to activate the random playback, the word

“RANDOM” is shown on the display.

–All ﬁles/tracks on the CD will be played once in random order.

2. To cancel this function, press the Random button again, the word “RANDOM” disappears.

–The current track and subsequent tracks will be played to the end in its default order.

3. You can also press the Stop button to cancel the function and quit the playback.

Playing the introduction of ﬁles or tracks (Intro.)

1. Press the Int. button in stop mode. The display shows the word “INTRO”.

–Playback starts, the ﬁrst ten seconds of each ﬁle/track are played.

2. To cancel this function, press the Int. button again, the word “INTRO” disappears on the display.

–The current track and the subsequent tracks are played to the end.

3. You can also press the Stop button to cancel the function and quit the playback.

14

CD MODE

Calling up ﬁle information (MP3/WMA only)

You can call up ﬁle information (ID3 tag and ticker text) with this function.

1. During playback, the display switches to show the album and ﬁle name.

2. Repeatedly press the Display button to cycle through the information.

Creating a track memory

You can create a track memory of up to 60 tracks (CD-DA) or up to 60 ﬁles from different albums (MP3/

WMA) of the current CD in any order you desired and then play the tracks in that sequence. A ﬁle or

track may be stored more than once. Programming is only possible in stop mode.

Selecting and storing tracks

1. In stop mode, press the Prog. button to call up the function.

–The word “PROG” ﬂashes during the programming.

–Display shows “P-01” for the ﬁrst preset

2. Select the ﬁle/track by pressing the Rewind or Forward button.

–In MP3/WMA, you also can select the album by pressing the Up or Down button.

3. Press the Prog. button to store.

4. To store more ﬁles/tracks, repeat step 2 and 3.

Playing the track memory

1. Press the Play/Pause button to start playing. Playback begins with the ﬁrst programmed ﬁle or

track.

–The word “PROG” lights on the display indicates there is a track memory.

2. Press the Play/Pause button to pause the playback, or press the Stop button to end the

playback.

3. To play the track memory again, press the Play/Pause button.

Viewing or changing the track selection

1. In stop mode, the display shows the ﬁrst programmed ﬁle/track number, and the word “PROG”

ﬂashes.

Repeatedly press the Prog. button to cycle through each preset of the track memory.

2. You can change any preset by pressing the Rewind or Forward, Up or Down button to select

a new ﬁle/track, and then press the Prog. button to conﬁrm.

Adding ﬁles or tracks

1. In stop mode, repeatedly press the Prog. button until the track number of a preset is zero.

2. Select the track by using the Rewind or Forward, Up or Down button.

3. Press the Prog. button to save the track.

Deleting the track memory

1. In stop mode, press the Stop button, “PROG” will disappears on the display

or

Open the CD compartment.

15

SD CARD AND USB MODE

Secure Digital (SD or SDHC) cards can be used with the device for playback of MP3 or WMA ﬁles.

SD or SDHC cards up to 16GB are supported. However, there are many different cards variants avail-

able and not all cards can be guaranteed to work in the device. SD or SDHC cards must be formatted

using the FAT or FAT32 ﬁling system in order to operate with the device.

Playback control in SD card and USB mode is similar to CD MP3/WMA mode, please refer to CD mode.

MP3/WMA ﬁles are played back in the order that they are written to the SD card and USB memory

device by your computer, except when Random playback is selected.

Playing the contents of a MMC/SD/SDHC memory card

1. Insert the card carefully with its label side facing outwards and gold contacts ﬁrst into the SD Card

socket.

Notes:

The hi-ﬁ system must be switched off while the memory card is being inserted. If it is not switched

off, data can be lost.

Do not use excessive force when inserting the memory card. Only apply slight pressure.

2. Switch on the hi-ﬁ system and press the Function button to select SD CARD.

The hi-ﬁ system then reads the content, and the display shows “READING”. The display will show

the total number of albums and ﬁles.

If there is no memory card inserted, “NO SD” is shown on the display.

3. Press the Play/Pause button to start playback with the ﬁrst ﬁle of the ﬁrst album.

Playing the contents of an USB memory stick

1. Insert the USB plug into the USB socket.

Notes:

The hi-ﬁ system must be switched off while the USB connection is being made. If it is not

switched off, data can be lost.

Do not use excessive force when inserting the memory card. Only apply slight pressure.

2. Switch on the hi-ﬁ system and press the Function button to select USB.

The hi-ﬁ system then reads the content, and the display shows “READING”. The display will show

the total number of albums and ﬁles.

If no device is connected, “NO USB” is shown on the display.

3. Press the Play/Pause button to start playback with the ﬁrst ﬁle of the ﬁrst album.

Note:

The USB socket on the hi-ﬁ system does not support a connection for a USB extension cable and is not

designed for directly connecting to a computer.

Removing the MMC/SD/SDHC card and USB device

1. Switch off the hi-ﬁ system.

2. To remove the USB memory stick, simply pull out the device.

To remove the MMC/SD/SDHC memory card, press the card inwards slightly until the latch is

released. Then pull out the card.

Note:

Never remove memory cards and USB devices during operation. This can damage the memory card, the

USB device and the hi-ﬁ system. This type of damage will invalidate your warranty.

16

AUXILIARY INPUT MODE

The device has an auxiliary input mode for listening audio signal from an external audio device, such as

iPod, MP3 player, CD player, etc.

1. Connect a stereo or mono audio source to the Auxiliary Input socket (Ø3.5mm) provided on the

side of the device.

2. Switch on the device, and press the Function button to select “AUX” as the input source.

3. Adjust the volume of your player and the device for comfortable listening.

17

ALARM FUNCTION

The device has an alarm function which can be set to wake you to buzzer, radio, CD or SD card input

source. The alarm duration is 90 minutes.

Setting the alarm time

1. With the device switched off, press and hold the Alarm button until the hour digits ﬂash on the

display.

2. Press the Rewind or Forward button to set the hour, and then press the Alarm button to conﬁrm.

–Display: the minute digits ﬂashes.

3. Press the Rewind or Forward button to set the minute, and press the Alarm button to conﬁrm.

–Display: the alarm source ﬂashes.

4. Press the Rewind or Forward button to set the alarm source between “CD”, “SD CARD”, “USB”,

“TUNER” and “BUZZER”.

5. If you select “CD”, “SD CARD”, “USB” or “TUNER”, the symbol “

” ﬂashes on the display, press

the Alarm button to conﬁrm.

If you select “BUZZER”, the symbol “

” ﬂashes, press the Alarm button to conﬁrm.

6. Set the alarm volume by using the Volume button.

7. Press the Alarm button to conﬁrm and ﬁnish the setting.

–Display: the current time and the symbol “

” or “ ” lights on.

Notes:

If no button is pressed for more than 5 seconds during the setting, the device will quit the process auto-

matically, and you have to start again.

If you select “CD”, “SD CARD” or “USB” as the alarm source, make sure that a CD, SD card or USB

device has been inserted. Otherwise there will be no alarm signal.

Viewing the alarm time

1. In standby mode, repeatedly press the Alarm button to cycle through the alarm settings.

You may change the settings according to the procedures of “Setting the alarm time”.

Interrupting the alarm

1. During the alarm is sounding, press the Snooze button.

–The alarm signal stops.

–The alarm goes off again at 5-minute intervals (overall alarm duration is 90 minutes).

Cancelling the alarm for the day

1. Press the On/Off button when the alarm is sounding.

–The alarm remains activated for the next day.

Switching off the alarm for the weekend

You can switch off the alarm function over the weekend while the alarm setting is saved.

1. Switch off the alarm function with WEC button on the remote control.

2. Press the WEC button again to reactivate the alarm function for weekend.

18

ALARM FUNCTION

Activating and deactivating the alarm

1. To deactivate the alarm, brieﬂy press the Alarm button in standby mode. The alarm symbol

disappears on the display.

The alarm setting is saved.

2. To activate the alarm, brieﬂy press the Alarm button again in standby mode. The display shows the

alarm symbol.

SLEEP FUNCTION

The device can be set to turn off after a preset time has elapsed. The sleep setting can be adjusted

between 10 and 90 minutes in 10-minute intervals.

Setting the sleep timer

1. Switch on the device, and select the listening source you desired.

2. Press the Sleep button to call up the function.

–The word “90 MIN” and the symbol >

< is shown on the display.

3. Repeatedly press the Sleep button to select the sleep time in 10-minute intervals.

The device will switch off after the preset sleep time has elapsed.

Cancelling the sleep timer

1. To cancel the sleep timer before the chosen sleep time has elapsed; press the Sleep button until

the word “00 MIN” shown on the display.

–The device remains switches on, and the symbol >

< disappears.

2. If you switch on the device and switch off the device before the sleep time has elapsed, press the

On/Off button.

–The symbol >

< disappears, and the device is switched off.

REMINDER FUNCTION

The device can be set to remind you by sounding the signal tone at a preset time. The reminder time

setting can be adjusted from 10 to 120 minutes in 10-minute intervals.

1. Switch the device to standby mode, press the NAP button on the remote control.

The display shows ”NAP 10” and the symbol “NAP” ﬂashes.

2. Repeatedly press the NAP button to select the reminder time in 10-minute intervals.

After the time has expired, a signal tone sounds.

3. Switch off the signal tone by pressing the On/Off button.

or

Interrupt the function early by setting the reminder time to “NAP 00” using the NAP button.

INFORMATION

Technical data

Power Supply Mains operation AC 230V, 50Hz~ only

Battery operation

(For remote control only) 2 x 1.5V (R03 / UM4 / AAA size)

Maximum Power Operation 32 W

Consumption Standby 0.5 W (with display and backlight are switched off)

Frequency Coverage FM 87.5 – 108MHz

MW 522 – 1620 kHz

Aerial System FM Wire Antenna

AM Loop Antenna

General Dimension of unit Approx. 380L x 275H x 170D (mm)

Technical and design modiﬁcations reserved.

Never open the device casing. The manufacturer will not accept any liability for damage resulting from

improper handling.

General information on laser devices

You will ﬁnd a symbol similar to the one shown here on the bottom of the

device.

CLASS 1 LASER PRODUCT means that the laser is designed in such a

way as to ensure that the maximum permissible emission value cannot be

exceeded under any circumstances.

If operating devices or methods other than those speciﬁed here are em-

ployed, it may lead to dangerous exposure to emissions.

Invisible laser radiation is emitted if the CD compartment is opened and the safety locking mechanism is

shorted. Do not expose yourself to this radiation.

Environmental note

This product has been made from high-quality parts and materials which can be reused

and recycled.

Therefore, do not throw the product away with normal household waste at the end of

its life. Take it to a collection point for recycling electrical and electronic device. This is

indicated by this symbol on the product, in the operating manual and on the packaging.

Please ﬁnd out about collection points operated by your local authority.

Help protect the environmental by recycling used products.

19

Page is loading ...

Salora PA2210CD, Elite 2 Owner's manual

Related papers

Other documents