2. American Standard
  3. 7692.000.020

American Standard 7692.000.020, 7692.008.020, 7692008.020 User manual

  • Hello! I am an AI chatbot trained to assist you with the American Standard 7692.000.020 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
M48
© 2013 AS America Inc.
Revised 5/13
To Be Specied:
❏ Faucet: 8340.235 exposed yoke wall-mount
utility faucet
❏ Faucet: 8340.243 same as above
with vacuum breaker
❏ Faucet: 8341.076 same as above
with vacuum breaker and stops in shank
❏ Alternative Faucet
❏ Trap Standard: 7798.030 cast iron “P” trap
standard to wall and strainer for 3" iron pipe
❏ Trap Standard: 7798.020 cast Iron “P” trap
standard to wall and strainer for 2" iron pip
LAKEWELL
™
SERVICE SINK
ENAMELED CAST IRON
LAKEWELL™ SERVICE SINK
• Enameledcastiron(insideonlyenameled)
• Suppliedwithwallhangerandrimguard
• Availablewithplainbackordrilledback
for faucet
❏ 7692.008 With drilled back 2 holes on 8"
centersandrimguard
❏ 7692.000Withplainbackandrimguard
(nofaucetholedrilling)
Nominal Dimensions:
559 x 457mm
(22"x18")
Bowl sizes:
18-1/2"(470mm)wide
14-1/8"(359mm)fronttoback
10-1/2"(267mm)deep
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.1forCastIronPlumbingFixtures
NOTES:
PROVIDESUITABLEREINFORCEMENTFORALLWALLSUPPORTS.
FITTINGANDTRAPSTANDARDNOTINCLUDEDANDMUSTBE
ORDEREDSEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within
therangeoftolerancesestablishedbyANSIStandardA112.19.2.These
measurementsaresubjecttochangeorcancellation.Noresponsibilityis
assumedforuseofsupersededorvoidedpages.
11-1/4"
(286mm)
15" REF.
(381mm)
26-1/4"
(667mm)
6"
(152mm)
14"
(356mm)
1"
(25mm)
10-1/4"
(260mm)
2"
(51mm)
9"
(229mm)
FINISHED WALL
HANGER
C/L OF
SPOUT
BRACE
8"
(203mm)
9"
(229mm)
3" REF.
(76mm)
22"
(559mm)
42-1/4"
(1073mm)
18"
(457mm)
5"
(127mm)
10-1/2"
(267mm)
1/2" COLD
1/2" HOT
FINISHED
FLOOR
2 or 3 N.P.T. NIPPLE
AND FLANGE
NOT FURNISHED
/