Aiphone DMA2060 is a 60-watt paging amplifier that can be used for a variety of applications, including paging, background music, and intercom systems. It has four inputs, including a microphone input, an auxiliary input, a telephone input, and a remote volume input. The amplifier also has a built-in MOH (music on hold) function, which allows you to play music while callers are on hold. The DMA2060 is a versatile amplifier that can be used in a variety of applications, making it a great choice for businesses and organizations of all sizes. Here are some of the possible use cases for the Aiphone DMA2060:
Aiphone DMA2060 is a 60-watt paging amplifier that can be used for a variety of applications, including paging, background music, and intercom systems. It has four inputs, including a microphone input, an auxiliary input, a telephone input, and a remote volume input. The amplifier also has a built-in MOH (music on hold) function, which allows you to play music while callers are on hold. The DMA2060 is a versatile amplifier that can be used in a variety of applications, making it a great choice for businesses and organizations of all sizes. Here are some of the possible use cases for the Aiphone DMA2060:
P30BGM (30W); DMA2060 (60W); DMA2120 (120W)
Provided by Aiphone
- Supplemental Wiring Instructions for connecting with Aiphone Systems -
0315
Aiphone offers a series of Paging Amplifiers to provide paging and other features for many of our systems.
These amplifiers are manufactured by PASO, and are available in 30, 60, and 120 Watt sizes. When
adding background music to the NEM system or paging to a large variety of other Aiphone systems, these
amplifiers are tested and approved. This supplemental instruction manual includes wiring diagrams for
applications with Aiphone systems. See PASO Installation & Operation Manual included with the product
for complete information on these products.
AVAILABLE MODELS WATTAGE APPLICATIONS
P30BGM 30 Watts - Paging & Background Music
DMA2060 60 Watts - Paging & Background Music
DMA2120 120 Watts - Paging & Background Music
When using the above Amplifiers for Paging via an Aiphone system, match the appropriate
paging adaptor with the system being used. Choose the amplifier based on input and output
requirements for your application.
PAGING ADAPTOR SYSTEM
AXW-PA1 AX
BA-1 LEM, LEF, NEM, NDR, NDRM
MC-A/A MC-60/4A
PD-1 TD-H
PD-2 (w/Talkback) TD-H
30 Watt Amplifier 60 and 120 Watt Amplifiers
PA OUTPUT CONTACT OUTPUT
IS-RCU
P1 P2 P3 P4 L1 L2 L3 L4 L5 L6 L7 L8
1CX1 2CX1 3CX1 4CX1
1CX2 2CX2 3CX2 4CX2
AIPHONE IS-CCU
M1
M2
M3
M4
D1
D2
D3
D4
MASTER STATION
VIDEO / AUDIO
DOOR / SUB STATION
1MX1
1MX2
PA OUTPUT CONTACT OUTPUT
IS-RCU
P1 P2 P3 P4 L1 L2 L3 L4 L5 L6 L7 L8
1CX1 2CX1 3CX1 4CX1
1CX2 2CX2 3CX2 4CX2
AIPHONE IS-CCU
M1
M2
M3
M4
D1
D2
D3
D4
MASTER STATION
VIDEO / AUDIO
DOOR / SUB STATION
1MX1
1MX2
Page 2
WIRING DIAGRAM
P30BGM with the IS System:
Page through an overhead speaker system from an IS system using the IS-CCU, IS-SCU,
or IS-RCU (P1-P4 outputs).
Output to
Speaker System
WIRING DIAGRAM
DMA2060 or DMA2120 with the IS System:
Page through an overhead speaker system from an IS system using the IS-CCU, IS-CCU,
or IS-RCU (P1-P4 outputs).
Output to
Speaker System
MOH
LEVEL
GROUND
COM 8 25V 70V
paso
1 volt
600
0
MOH
2 watt max
8
0
ZONE1
MUTE
UNMUTE
G
24VDC
250ma
(-) (+)
G COM HOT RVC RVC G COM HOT G COM HOT G COM HOT
INPUT 3 (MIC) TEL (PAGING) INPUT 1 (MIC)
INPUT 3
REMOTE
VOLUME
AUX2
47k ohm
INPUT 4 (MIC-AUX2)
ZONE 1
LEVEL
VOX
SENS
MUTE
DELAY
3-60SEC
PRE
OUT
MIX
BUSS
LINE OUT
600
POWER
IN
(AUX 1)
ATTNEUATOR
INPUT 3
47k ohm
INPUT 4
47K ohm
L
R
(AUX 2)
ATTNEUATOR
When not using “EQ LINK” ports,
adjust switch to “INTERNAL”
To Tel (COM & HOT)
IS-CCU
IS-CCU
To P1-P4
To P1-P4
To Tel (COM & HOT)
MIC TEL
BALANCED BALANCED
COM
HOT
AUX
ATTENUATOR
AUX
47KΩ 200mv
IN PARALLEL
COM 8 25V 70V
GROUND
LINE FUSE
1.6A 250V
UNMUTE
600Ω
LINE OUT
120V 60Hz
AC 100VA
pasosound
SPEAKER OUTPUT
MOH
LEVEL
MOH
10KΩ/600Ω
10KΩ/600Ω
INTERNAL
JUMPER
SWITCHABLE
MUTE
MUTE
G
250Ω
1mV
600Ω
100mV
G
G
COM
HOT
50KΩ 100mV
TEL PAGE
UNBALANCED
L
R
MIC TEL
BALANCED BALANCED
COM
HOT
AUX
ATTENUATOR
AUX
47KΩ 200mv
IN PARALLEL
COM 8 25V 70V
GROUND
LINE FUSE
1.6A 250V
UNMUTE
600Ω
LINE OUT
120V 60Hz
AC 100VA
pasosound
SPEAKER OUTPUT
MOH
LEVEL
MOH
10KΩ/600Ω
10KΩ/600Ω
INTERNAL
JUMPER
SWITCHABLE
MUTE
MUTE
G
250Ω
1mV
600Ω
100mV
G
G
COM
HOT
50KΩ 100mV
TEL PAGE
UNBALANCED
L
R
Page 3
Yellow to # terminal on Master
Green to E on Master
TONE VOL
BA-1
Output to
Speaker System
WIRING DIAGRAM
P30BGM with the NB-U for Background Music for NEM System:
To A1 on NEM/NDR/NDRM Master
To A2 on NEM/NDR/NDRM Master
To A3 on NEM/NDR/NDRM Master
To A4 on NEM/NDR/NDRM Master
A1 A2 A3 A4
V4V3V2V1EYB
8
63
BGM
NB-U
To V4 on NEM/NDR/NDRM Master
To V3 on NEM/NDR/NDRM Master
To V2 on NEM/NDR/NDRM Master
To V1 on NEM/NDR/NDRM Master
To E on NEM/NDR/NDRM Master
To Y on NEM/NDR/NDRM Master
To B on NEM/NDR/NDRM Master
Tie the 25V output of the amplifier
to the 63
input of the NB-U.
WIRING DIAGRAM
P30BGM with the BA-1:
Page through an overhead speaker system from a channel selector on an Aiphone Master
Station. See page 1 for systems compatible with the BA-1.
MIC TEL
BALANCED BALANCED
COM
HOT
AUX
ATTENUATOR
AUX
47KΩ 200mv
IN PARALLEL
COM 8 25V 70V
GROUND
LINE FUSE
1.6A 250V
UNMUTE
600Ω
LINE OUT
120V 60Hz
AC 100VA
pasosound
SPEAKER OUTPUT
MOH
LEVEL
MOH
10KΩ/600Ω
10KΩ/600Ω
INTERNAL
JUMPER
SWITCHABLE
MUTE
MUTE
G
250Ω
1mV
600Ω
100mV
G
G
COM
HOT
50KΩ 100mV
TEL PAGE
UNBALANCED
L
R
Orange
Brown
-+
+ -
BGM Source
MIC TEL
BALANCED BALANCED
COM
HOT
AUX
ATTENUATOR
AUX
47KΩ 200mv
IN PARALLEL
COM 8 25V 70V
GROUND
LINE FUSE
1.6A 250V
UNMUTE
600Ω
LINE OUT
120V 60Hz
AC 100VA
pasosound
SPEAKER OUTPUT
MOH
LEVEL
MOH
10KΩ/600Ω
10KΩ/600Ω
INTERNAL
JUMPER
SWITCHABLE
MUTE
MUTE
G
250Ω
1mV
600Ω
100mV
G
G
COM
HOT
50KΩ 100mV
TEL PAGE
UNBALANCED
L
R
Page 4
WIRING DIAGRAM
P30BGM with the MC-A/A on the MarketCom System:
WIRING DIAGRAM
DMA2060 or DMA2120 with the MC-A/A on the MarketCom System:
MOH
LEVEL
GROUND
COM 8 25V 70V
paso
1 volt
600
0
MOH
2 watt max
8
0
ZONE1
MUTE
UNMUTE
G
24VDC
250ma
(-) (+)
G COM HOT RVC RVC G COM HOT G COM HOT G COM HOT
INPUT 3 (MIC) TEL (PAGING) INPUT 1 (MIC)
INPUT 3
REMOTE
VOLUME
AUX2
47k ohm
INPUT 4 (MIC-AUX2)
ZONE 1
LEVEL
VOX
SENS
MUTE
DELAY
3-60SEC
PRE
OUT
MIX
BUSS
LINE OUT
600
POWER
IN
(AUX 1)
ATTNEUATOR
INPUT 3
47k ohm
INPUT 4
47K ohm
L
R
(AUX 2)
ATTNEUATOR
To 24VDC + and 1 on MC-60/4
To 2 on MC-60/4
To 3 on MC-60/4
To 4 on MC-60/4
To 24VDC – and 5 on MC-60/4
MA G
1/+ 2 3 4 5/-
To 24VDC + and #1 on MC-60/4
To #2 on MC-60/4
To #3 on MC-60/4
To #4 on MC-60/4
To 24VDC – and # 5 on MC-60/4
76
EQLINK
Adjust (AUX 2) attenuator accordingly
to obtain optimum output
AUX2 “HOT”
AUX2 “COM”
MC-A/A
MC-A/A
Output to
Speaker System
Output to
Speaker System
When not using “EQ
LINK” ports, adjust
switch to “INTERNAL”
MA G
1/+ 2 3 4 5/-
76
WIRING DIAGRAM
DMA2060 or DMA2120 with the BA-1:
MOH
LEVEL
GROUND
COM 8 25V 70V
paso
1 volt
600
0
MOH
2 watt max
8
0
ZONE1
MUTE
UNMUTE
G
24VDC
250ma
(-) (+)
G COM HOT RVC RVC G COM HOT G COM HOT G COM HOT
INPUT 3 (MIC) TEL (PAGING) INPUT 1 (MIC)
INPUT 3
REMOTE
VOLUME
AUX2
47k ohm
INPUT 4 (MIC-AUX2)
ZONE 1
LEVEL
VOX
SENS
MUTE
DELAY
3-60SEC
PRE
OUT
MIX
BUSS
LINE OUT
600
POWER
IN
(AUX 1)
ATTNEUATOR
INPUT 3
47k ohm
INPUT 4
47K ohm
L
R
(AUX 2)
ATTNEUATOR
EQLINK
When not using “EQ LINK” ports,
adjust switch to “INTERNAL”
Yellow to # terminal on Master
Green to E on Master
Orange to AUX2 “HOT”
Brown to AUX2 “COM”
Output to
Speaker System
BA-1
TONE VOL
+ -
MIC TEL
BALANCED BALANCED
COM
HOT
AUX
ATTENUATOR
AUX
47KΩ 200mv
IN PARALLEL
COM 8 25V 70V
GROUND
LINE FUSE
1.6A 250V
UNMUTE
600Ω
LINE OUT
120V 60Hz
AC 100VA
pasosound
SPEAKER OUTPUT
MOH
LEVEL
MOH
10KΩ/600Ω
10KΩ/600Ω
INTERNAL
JUMPER
SWITCHABLE
MUTE
MUTE
G
250Ω
1mV
600Ω
100mV
G
G
COM
HOT
50KΩ 100mV
TEL PAGE
UNBALANCED
L
R
MIC TEL
BALANCED BALANCED
COM
HOT
AUX
ATTENUATOR
AUX
47KΩ 200mv
IN PARALLEL
COM 8 25V 70V
GROUND
LINE FUSE
1.6A 250V
UNMUTE
600Ω
LINE OUT
120V 60Hz
AC 100VA
pasosound
SPEAKER OUTPUT
MOH
LEVEL
MOH
10KΩ/600Ω
10KΩ/600Ω
INTERNAL
JUMPER
SWITCHABLE
MUTE
MUTE
G
250Ω
1mV
600Ω
100mV
G
G
COM
HOT
50KΩ 100mV
TEL PAGE
UNBALANCED
L
R
MA G
+
DC12V -
CSSVV
To 12VDC + on TD-nH/B
To 12VDC – on TD-nH/B
To # on TD-nH/B
To Talkback Paging Speakers
Page 5
WIRING DIAGRAM
P30BGM with the PD-1 or PD-2 and TD-H System:
WIRING DIAGRAM
DMA2060 or DMA2120 with the PD-1 or PD-2 and TD-H System:
C
MA G
+
DC12V -
To 12VDC + on TD-nH/B
To 12VDC – on TD-nH/B
To # on TD-nH/B
Output used
determined
by speakers
MA G
+
DC12V -
CSSVV
To 12VDC + on TD-nH/B
To 12VDC – on TD-nH/B
To # on TD-nH/B
To Talkback Paging Speakers
PD-1
PD-2
MOH
LEVEL
GROUND
COM 8 25V 70V
paso
1 volt
600
0
MOH
2 watt max
8
0
ZONE1
MUTE
UNMUTE
G
24VDC
250ma
(-) (+)
G COM HOT RVC RVC G COM HOT G COM HOT G COM HOT
INPUT 3 (MIC) TEL (PAGING) INPUT 1 (MIC)
INPUT 3
REMOTE
VOLUME
AUX2
47k ohm
INPUT 4 (MIC-AUX2)
ZONE 1
LEVEL
VOX
SENS
MUTE
DELAY
3-60SEC
PRE
OUT
MIX
BUSS
LINE OUT
600
POWER
IN
(AUX 1)
ATTNEUATOR
INPUT 3
47k ohm
INPUT 4
47K ohm
L
R
(AUX 2)
ATTNEUATOR
EQLINK
When not using
“EQ LINK” ports,
adjust switch to
“INTERNAL”
C
MA G
+
DC12V -
To 12VDC + on TD-nH/B
To 12VDC – on TD-nH/B
To # on TD-nH/B
PD-1
TONE
BYPASS
AUX2 INPUT 4 “HOT"
AUX2 INPUT 4 “COM"
MOH
LEVEL
GROUND
COM 8 25V 70V
paso
1 volt
600
0
MOH
2 watt max
8
0
ZONE1
MUTE
UNMUTE
G
24VDC
250ma
(-) (+)
G COM HOT RVC RVC G COM HOT G COM HOT G COM HOT
INPUT 3 (MIC) TEL (PAGING) INPUT 1 (MIC)
INPUT 3
REMOTE
VOLUME
AUX2
47k ohm
INPUT 4 (MIC-AUX2)
ZONE 1
LEVEL
VOX
SENS
MUTE
DELAY
3-60SEC
PRE
OUT
MIX
BUSS
LINE OUT
600
POWER
IN
(AUX 1)
ATTNEUATOR
INPUT 3
47k ohm
INPUT 4
47K ohm
L
R
(AUX 2)
ATTNEUATOR
EQLINK
When not using
“EQ LINK” ports,
adjust switch to
“INTERNAL”
PD-2
TONE
BYPASS
AUX2 INPUT 4 “HOT"
AUX2 INPUT 4 “COM"
Output
used
determined
by speakers
Output to
Speaker System
Output to
Speaker System
+ -
+ -
MIC TEL
BALANCED BALANCED
COM
HOT
AUX
ATTENUATOR
AUX
47KΩ 200mv
IN PARALLEL
COM 8 25V 70V
GROUND
LINE FUSE
1.6A 250V
UNMUTE
600Ω
LINE OUT
120V 60Hz
AC 100VA
pasosound
SPEAKER OUTPUT
MOH
LEVEL
MOH
10KΩ/600Ω
10KΩ/600Ω
INTERNAL
JUMPER
SWITCHABLE
MUTE
MUTE
G
250Ω
1mV
600Ω
100mV
G
G
COM
HOT
50KΩ 100mV
TEL PAGE
UNBALANCED
L
R
Page 6
WIRING DIAGRAM
P30BGM with the AXW-PA1 on the AX System:
WIRING DIAGRAM
DMA2060 or DMA2120 with the AXW-PA1 on the AX System:
MOH
LEVEL
GROUND
COM 8 25V 70V
paso
1 volt
600
0
MOH
2 watt max
8
0
ZONE1
MUTE
UNMUTE
G
24VDC
250ma
(-) (+)
G COM HOT RVC RVC G COM HOT G COM HOT G COM HOT
INPUT 3 (MIC) TEL (PAGING) INPUT 1 (MIC)
INPUT 3
REMOTE
VOLUME
AUX2
47k ohm
INPUT 4 (MIC-AUX2)
ZONE 1
LEVEL
VOX
SENS
MUTE
DELAY
3-60SEC
PRE
OUT
MIX
BUSS
LINE OUT
600
POWER
IN
(AUX 1)
ATTNEU ATOR
INPUT 3
47k ohm
INPUT 4
47K ohm
L
R
(AUX 2)
ATTNEUATOR
EQLINK
When not using
“EQ LINK” ports,
adjust switch to
“INTERNAL”
Output to
Speaker System
Output to
Speaker System
AXW-PA1
600 ohm, non-polarized
RJ45 to sub
output on AX-CEU
Set GAIN switch to match amplifier's
input level. (Default in L position.)
High Gain: 0dB output to 600 ohm load
Low Gain: -20dB output to 600 ohm load
INPUT OUTPUT
GAIN
L H
Wht
Wht
AXW-PA1
600 ohm, non-polarized
RJ45 to sub
output on AX-CEU
Set GAIN switch to match amplifier's
input level. (Default in L position.)
High Gain: 0dB output to 600 ohm load
Low Gain: -20dB output to 600 ohm load
INPUT OUTPUT
GAIN
L H
Wht
Wht
Page 7
MODELS WATTAGE INPUTS OUTPUTS
P30BGM 30 Watts Mic (250 ohm, 1 mV) 8 ohm
Telephone (600 ohm
1 mV) 25V
Auxiliary (47K ohm
100mV) 70V
Program (10K ohm)
DMA2060 60 Watts Mic (250 ohm, 1.5mV) 8 ohm
Telephone (600 ohm, 100mV) 25V
Input 3: Mic 3 - Aux 1 balanced 70V
Input 4: Mic 3 - Aux 2 balanced Zone 1 (8 ohm, 2W)
MOH (1V) Line out (600 ohm
DMA2120 120 Watts Mic (250ohm, 1.5mV) 8 ohm
Telephone (600ohm, 100mV) 25V
Input 3: Mic 3 - Aux 1 balanced 70V
Input 4: Mic 3 - Aux 2 balanced Zone 1 (8 ohm, 2W)
MOH (1V) Line out (600 ohm
P30BGM (30W)
DMA2060 (60W); DMA2120 (120W)
See PASO Amplifier Installation Manual & Operating Instructions for complete information.
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
FAX (425) 455-0071
TOLL FREE TECHNICAL SUPPORT:
(800) 692-0200
E-MAIL: [email protected]
Page 8
Aiphone-PASO Amp
0315
SERVICE ISSUES:
To receive Technical Support for connecting your Amplifier with an Aiphone system:
1. Contact Aiphone Technical Support at (800) 692-0200 during the hours of 6:00AM to 4:30 PM
Pacific Time.
2. For questions about the amplifier other than connection to the Aiphone system, contact Paso’s
Technical Support at (800) 231-3034.
To obtain Repair Service on your Paso Amplifier provided by Aiphone:
1. Call Paso at 1-800-231-3034 and ask for an SA Number (Service Authorization number).
2. Advice Paso that the unit was purchased from Aiphone and that you are an Aiphone customer
requesting to send the unit in for repair evaluation.
3. Provide Paso with Model No. and Serial No. and a brief description of the problem.
4. Return the unit well packed to Paso’s address below.
5. Paso will repair or replace the unit at their discretion and return it directly to you, Freight Prepaid
at no charge.
6. Paso Amplifiers have a 5-year warranty on parts and labor.
SA# xxxx
PASO SOUND PRODUCTS, INC.
4750 Goer Drive – Building F
Charleston, SC 29406
ATTN: SERVICE DEPARTMENT
SPECIFICATIONS and WARRANTY:
Refer to Paso Installation and Operating Instructions included with the Amplifier.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Aiphone DMA2060 User manual
- Category
- Musical Equipment
- Type
- User manual
Aiphone DMA2060 is a 60-watt paging amplifier that can be used for a variety of applications, including paging, background music, and intercom systems. It has four inputs, including a microphone input, an auxiliary input, a telephone input, and a remote volume input. The amplifier also has a built-in MOH (music on hold) function, which allows you to play music while callers are on hold. The DMA2060 is a versatile amplifier that can be used in a variety of applications, making it a great choice for businesses and organizations of all sizes. Here are some of the possible use cases for the Aiphone DMA2060:
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Aiphone DMA2060 User manual
-
-
-
Aiphone AXW-AZ Install Manual
-
-
-
-
-
-
Other documents
-
DSPPA MP35H User manual
-
TOA BG-220 CU User manual
-
CSI P-240A User manual
-
Moxa NDR Power Supply Series Quick setup guide
-
GP Batteries 040EU377U1 Datasheet
-
Paso Sound Products DMA2015 Installation Manual And Operating Instructions
-
Paso T3015DMA Installation Manual And Operating Instructions
-
TOA BG-1060 User manual
-
Facina VKPSU16 Engineer Manual
-
Optimus PD-1 User manual
