Bunker Hill Security Item 63129-UPC 193175352200 Owner's manual

Type
Owner's manual

Bunker Hill Security Item 63129-UPC 193175352200 is a security camera system that includes a monitor and two cameras. The monitor has a 3.5-inch color screen and can display the feeds from both cameras simultaneously or switch between them manually or automatically. The cameras have a 540 TVL resolution and night vision capabilities, making them suitable for both indoor and outdoor use. The system is easy to set up and use, with plug-and-play installation and intuitive controls. It can be used for a variety of security applications, such as home surveillance, business security, and baby monitoring. Here are some of the key features and possible use cases of the Bunker Hill Security Item 63129-UPC 193175352200:

Bunker Hill Security Item 63129-UPC 193175352200 is a security camera system that includes a monitor and two cameras. The monitor has a 3.5-inch color screen and can display the feeds from both cameras simultaneously or switch between them manually or automatically. The cameras have a 540 TVL resolution and night vision capabilities, making them suitable for both indoor and outdoor use. The system is easy to set up and use, with plug-and-play installation and intuitive controls. It can be used for a variety of security applications, such as home surveillance, business security, and baby monitoring. Here are some of the key features and possible use cases of the Bunker Hill Security Item 63129-UPC 193175352200:

!"#$%&"'%()*'+)%,-&."
/0,01%&2+%.'3,01'%)14%-115466...7-)+3&+8+'09-17(&*
:*)0#%&2+%1'(-"0()#%,255&+1%)14%5+&;2(1,255&+1<-)+3&+8+'09-17(&*
Owners Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back
of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep
this manual and the receipt in a safe and dry place for future reference. 20i
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
©
2020 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
To ols required for assembly and se rv ic e m ay n ot b e i nc lu de d .
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Page 2 =&+%1'(-"0()#%>2',10&",?%5#'),'%()##%@ABBBABCCADEFE7 Item 63129
GH=:IJ !K:LHIM!N OHMNI:NHNP:G:IQK
RHLNMNS%GJOT!UG%HNV%V:=MNMIM!NG
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
M*5&+1)"1%G)8'1$%M"8&+*)10&"
L');%)##%,)8'1$%.)+"0"9,%)";%0",1+2(10&",7%%
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury. %
G)W'%)##%.)+"0"9,%)";%0",1+2(10&",%8&+%8212+'%+'8'+'"('7
M",1)##)10&"%G)8'1$
1. X''5%(-0#;+'"%)";%3$,1)";'+,%).)$%
.-0#'%0",1)##0"9%1-'%()*'+),7%%Distractions
can cause you to lose control.
2. V&%"&1%&W'++')(-%.-'"%0",1)##0"9%
1-0,%5+&;2(17%%X''5%5+&5'+%8&&10"9%
)";%3)#)"('%)1%)##%10*',7 This enables
better control in unexpected situations.
3. Wear ANSI-approved safety
goggles during installation.
4. This product is not a toy. Mount
it out of reach of children.
!5'+)10&"%G)8'1$
1. V&%"&1%&5'+)1'%'#'(1+0()##$%5&.'+';%
5+&;2(1,%0"%'Y5#&,0W'%)1*&,5-'+',?%
,2(-%),%0"%1-'%5+','"('%&8%8#)**)3#'%
#0>20;,?%9),',?%&+%;2,17%Electrically
powered products create sparks which
may ignite the dust or fumes.
2. I-'%);)51'+%*2,1%*)1(-%1-'%&21#'17%%
N'W'+%*&;08$%1-'%5#29%0"%)"$%.)$7
Unmodified plugs and matching outlets
will reduce risk of electric shock.
3. V&%"&1%'Y5&,'%1-'%K&.'+%H;)51'+%&8%
1-0,%5+&;2(1%1&%+)0"%&+%.'1%(&";010&",7%
Water entering the Power Adapter will
increase the risk of electric shock.
4. V&%"&1%)32,'%1-'%K&.'+%P&+;7%%N'W'+%
2,'%1-'%(&+;%8&+%2"5#2990"9%1-'%5#29%
8+&*%1-'%&21#'17%%X''5%(&+;%).)$%
8+&*%-')1?%&0#?%,-)+5%';9',%&+%*&W0"9%
5)+1,7%%Damaged or entangled cords
increase the risk of electric shock.
Page 3=&+%1'(-"0()#%>2',10&",?%5#'),'%()##%@ABBBABCCADEFE7Item 63129
GH=:IJ!K:LHIM!NOHMNI:NHNP: G:IQK
5. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
G'+W0('%G)8'1$
1. K+&;2(1%,'+W0('%*2,1%3'%5'+8&+*';%
&"#$%3$%)%>2)#080';%1'(-"0(0)"7
2. R-'"%,'+W0(0"9%)%5+&;2(1?%2,'%&"#$%
0;'"10()#%+'5#)('*'"1%5)+1,7
3. O)0"1)0"%1-0,%5+&;2(1%.01-%()+'7%%
X''5%1-0,%5+&;2(1%(#')"7 Do not use
a damaged product. Tag damaged
products “Do not use” until repaired.
4. V0,(&""'(1%1-'%HP6VP%K&.'+%H;)51'+%
8+&*%1-'%5&.'+%,&2+('%3'8&+'%
*)Z0"9%)"$%);[2,1*'"1,?%(-)"90"9%
)((',,&+0',?%&+%,1&+0"9%1-0,%5+&;2(17%
Such preventive safety measures
reduce the risk of electric shock.
5. Maintain labels and nameplates on the unit.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
%GH/:%I\:G:%MNGILQPIM!NG7
S+&2";0"9
I!%KL:/:NI%:U:PILMP%G\!PX%HNV%V:HI\%=L!O%
MNP!LL:PI%SL!QNVMNS%RML:%P!NN:PIM!N4%
P-'(Z%.01-%)%>2)#080';%'#'(1+0(0)"%08%$&2%)+'%0"%;&231%),%1&%.-'1-'+%1-'%&21#'1%0,%
5+&5'+#$%9+&2";';7%%V&%"&1%*&;08$%1-'%5&.'+%(&+;%5#29%5+&W0;';%.01-%1-'%,$,1'*7%%
N'W'+%+'*&W'%1-'%9+&2";0"9%5+&"9%8+&*%1-'%5#297%%V&%"&1%2,'%1-'%,$,1'*%08%1-'%5&.'+%(&+;%&+%
5#29%0,%;)*)9';7%%M8%;)*)9';?%-)W'%01%+'5)0+';%3$%)%,'+W0('%8)(0#01$%3'8&+'%2,'7%%M8%1-'%5#29%.0##%
"&1%801%1-'%&21#'1?%-)W'%)%5+&5'+%&21#'1%0",1)##';%3$%)%>2)#080';%'#'(1+0(0)"7
=092+'%H4%%!21#'1,%8&+%]AK+&"9%K#29
1. The included adapter does
not require grounding.
2. The adapter may be used in either
of the 120 volt outlets shown in the
preceding illustration. ^G''%=092+'%H7_
Page 4 =&+%1'(-"0()#%>2',10&",?%5#'),'%()##%@ABBBABCCADEFE7 Item 63129
GH=:IJ !K:LHIM!N OHMNI:NHNP:G:IQK
:Y1'",0&"%P&+;,
N&1'4 Do not use an extension cord with this item’s adapter.
G$*3&#&9$
Double Insulated
/
Volts
`
Alternating Current
H
Amperes
Federal Communications
Commission
G5'(080()10&",
O!NMI!L
Monitor Input Rating 12 VDC / 500 m A
Screen Color
Operating Temperature 14º to 122º F
PHO:LH
Camera Resolution 540 TVL
Night Vision Active IR illumination
Camera Input Rating 12 VDC / 100 mA
Operating Temperature - 4º to 122º F
Mounts Swivel 360°
Ingress Protection Rating IP42
Page 5=&+%1'(-"0()#%>2',10&",?%5#'),'%()##%@ABBBABCCADEFE7Item 63129
GH=:IJ!K:LHIM!NOHMNI:NHNP: G:IQK
G'125
%L');%1-'%:NIML:%MOK!LIHNI%GH=:IJ%MN=!LOHIM!N%,'(10&"%
)1%1-'%3'90""0"9%&8%1-0,%*)"2)#%0"(#2;0"9%)##%1'Y1%2";'+%
,23-');0"9,%1-'+'0"%3'8&+'%,'1%25%&+%2,'%&8%1-0,%5+&;2(17
P&*5&"'"1,
O&"01&+
P)*'+)
P)*'+)
K&.'+%
H;)51'+
H/%P)3#'
H/%P)3#'
\)+;.)+' \)+;.)+'
Device
H/%!21%P)3#'%
^1&%L'(&+;0"9%V'W0('6O&"01&+%"&1%5+&W0;';_
H/%P)3#'
J'##&.%A%/0;'&
R-01'%A%H2;0&
L';%A%VP%K&.'+%^@]/%8+&*%K&.'+%H;)51'+_
H/%!21%P)3#'
J'##&.%A%/0;'&
R-01'%A%H2;0&
Page 6 =&+%1'(-"0()#%>2',10&",?%5#'),'%()##%@ABBBABCCADEFE7 Item 63129
GH=:IJ !K:LHIM!N OHMNI:NHNP:G:IQK
P&"1+&#,
H
System On/
Off Indicator
Lighted Blue LED indicates the system is turned on
T Power Indicator Lighted Red LED indicates the system is powered
P Monitor Displays selected feed(s) or Menu
V POWER Power button
: AUTO
Automatic continuous switching between the
two camera views at preset intervals
= MANUAL Manual switching between the two camera views
S MUTE Mute Button
\ MENU Make Menu selection
M
< / > ˄ / ˅
Left/Right and Up/Down buttons for navigating Menus
a AV OUT Audio/Video output to Monitor or Recording Device (not included)
X DC 12V 12 VDC Input
Page 7=&+%1'(-"0()#%>2',10&",?%5#'),'%()##%@ABBBABCCADEFE7Item 63129
GH=:IJ!K:LHIM!NOHMNI:NHNP: G:IQK
P&""'(10&",
1. Connect Cameras to Monitor:
a. Connect the cables on the
Cameras to the AV Cables.
b. Connect the AV Cables to AV1 and
AV2 sockets on Monitor.
2. Connect the Power Adapter to the DC
12V input socket on Monitor. Plug
the Power Adapter into a 120 VAC
grounded electrical outlet.
PHQIM!Nb%%The Monitor and Power Adapter
MUST be used indoors in a clean, dry location.
3. Connect to a Recording Device or another
Monitor (not included): Use AV Out
Cable to connect unit to other device.
N!IMP:4%%P\:PX%=:V:LHU?%GIHI:%
HNV%U!PHU%GQL/:MUUHNP:%UHRG%
T:=!L:%MNGIHUUMNS%/MV:!%HNV6!L%
HQVM!%GQL/:MUUHNP:%:cQMKO:NI7%
VP%@]/
H/%!QI
AV2
AV1
Not included
AV Out
Cable
To Monitor or
Recording
Device
Page 8 =&+%1'(-"0()#%>2',10&",?%5#'),'%()##%@ABBBABCCADEFE7 Item 63129
GH=:IJ !K:LHIM!N OHMNI:NHNP:G:IQK
P)*'+)%M",1)##)10&"
MOK!LIHNI4 Before mounting the Cameras, connect all the cables and test the system to ensure
unit and Cameras are working properly. Test the Cameras for the best location before installing.
1. When planning the mounting location and
angle of the Cameras, consider the following:
a. The cameras are not water resistant. They
must not be exposed to rain, mist, sprinkler
spray, or other sources of moisture.
b. Do not mount the Cameras in
bright or direct sunlight.
c. At night windows can reflect back
into the Camera, interfering with the
image. Test the Cameras in their
intended location before mounting.
d. Choose locations high enough so
that the Cameras are out of reach of
children and others who might tamper
with the units, but still cover the
desired viewing areas adequately.
e. Take into consideration the length of
the cables and the need to place the
Monitor in a safe, dry location. Do
not expose the Monitor to weather.
2. Route the AC/DC Adapter power cord
and all cabling along a safe route without
creating a tripping hazard or exposing the
cord and cables to possible damage.
3. Mount the Cameras to the
chosen locations as follows:
a. Place the Bracket Base against the
mounting surface. Use the base's
mounting holes as a template to mark
the two points for drilling pilot holes.
RHLNMNSb%%I!%KL:/:NI%G:LM!QG%
MNaQLJ4 Verify that installation surface
has no hidden utility lines or other wiring
before drilling or driving screws.
b. Drill the two pilot holes.
c. Mount the Cameras using the included
(or other appropriate) fasteners
and go through the two holes in the
Bracket Base of each Camera.
d. Adjust the Cameras to cover the desired
areas and tighten mounting screws.
e. Once Cameras are installed, run the AV
Cables to the Monitor and plug them in.
Protect connections with electrical tape.
!5'+)10"9%M",1+2(10&",
%L');%1-'%:NIML:%MOK!LIHNI%GH=:IJ%MN=!LOHIM!N%,'(10&"%
)1%1-'%3'90""0"9%&8%1-0,%*)"2)#%0"(#2;0"9%)##%1'Y1%2";'+%
,23-');0"9,%1-'+'0"%3'8&+'%,'1%25%&+%2,'%&8%1-0,%5+&;2(17
S'"'+)#%!5'+)10"9%M",1+2(10&",
1. K''#%&88%5+&1'(10W'%80#*%
(&W'+0"9%*&"01&+%,(+''"7
2. Press the POWER switch on the Monitor
to turn on the system. The camera's
view should appear on the screen.
3. Press the AUTO button to select automatic
switching from one camera view to the other.
4. Press the MANUAL button to manually select
between one camera view and the other.
5. Press the MUTE button to
turn the audio on or off.
6. Use the MENU button and Left/Right (< / >) or
Up/Down (˄ / ˅) buttons to make adjustments
or change settings following guidelines in
the MENU Settings section on page 9.
7. The system will operate continuously (day
and night) while the AC/DC Power Adapter
is plugged in and the system is turned on.
8. When not using the system, unplug the
Power Adapter from the AC electrical outlet.
Page 9=&+%1'(-"0()#%>2',10&",?%5#'),'%()##%@ABBBABCCADEFE7Item 63129
GH=:IJ!K:LHIM!NOHMNI:NHNP: G:IQK
O:NQ%G'110"9,
1. Press the POWER switch to turn on
the system. Press the MENU button to
scroll through and access menus. (See
Figure C on page 6 for control layout).
2. To adjust picture quality:
a. Select the PICTURE menu
using the MENU button.
b. Use the Up (˄) or Down (˅) buttons to
select BRIGHT, CONTRAST, or COLOR.
c. Use the Left (<) or Right (>) buttons
to adjust to the desired settings.
3. To adjust volume:
a. Select the VOLUME menu
using the MENU button.
b. Use the Left (<) or Right (>) buttons to
adjust volume to the desired level.
4. To adjust time interval in AUTO switch mode:
a. Select the OPTION menu
using the MENU button.
b. Select the desired setting by using
the Left (<) or Right (>) buttons to
adjust the time interval from 5 to 99
seconds for automatic switching from
one camera view to the other.
5. To select system video standard:
a. Select the SYSTEM menu
using the MENU button.
b. Use the Left (<) or Right (>) buttons to
select AUTO, PAL, NTSC, or SECAM.
6. To apply preset timer options:
a. Select the PRESET menu
using the MENU button.
b. Use the Up (˄) or Down (˅)
buttons to select SLEEP, TIME,
OFF-TIME, or ON-TIME.
c. Use the Left (<) or Right (>) buttons
to adjust to the desired settings.
N&1'4 If power to the Monitor is cut off or the
system is shut off any settings previously
entered in the PRESET menu will be lost and
the information will need to be re-entered.
Page 10 =&+%1'(-"0()#%>2',10&",?%5#'),'%()##%@ABBBABCCADEFE7 Item 63129
GH=:IJ !K:LHIM!N OHMNI:NHNP:G:IQK
M",5'(10&"?%O)0"1'")"('?%)";%P#')"0"9
%K+&(';2+',%"&1%,5'(080()##$%'Y5#)0"';%0"%1-0,%*)"2)#%*2,1%
3'%5'+8&+*';%&"#$%3$%)%>2)#080';%1'(-"0(0)"7
I!%KL:/:NI%G:LM!QG%MNaQLJ%=L!O%:U:PILMP%G\!PX4%
Q"5#29%1-'%K&.'+%H;)51'+%8+&*%01,%'#'(1+0()#%&21#'1%%
3'8&+'%0",5'(10&"?%*)0"1'")"('?%&+%(#')"0"97
O&"01&+
1. K:LM!VMPHUUJ? inspect the general
condition of the DVR. Check for:
loose hardware,
damaged cord/electrical wiring,
cracked or broken parts, and
any other condition that may
affect its safe operation.
2. K:LM!VMPHUUJ?%wipe external
surfaces with clean cloth.
P)*'+)
1. K:LM!VMPHUUJ? inspect the general
condition of the Camera. Check for:
loose hardware,
damaged cord/electrical wiring,
cracked or broken parts, and
any other condition that may
affect its safe operation.
2. K:LM!VMPHUUJ4
Wipe external surfaces
with clean, dry cloth.
Clean Camera lenses by applying
lens cleaning solution to scratch-free
cloth, then wiping lens. V&%"&1%
)55#$%,&#210&"%;0+'(1#$%1&%#'",',7
3. Maintain area surrounding Camera,
making sure obstacles don’t interfere with
visibility, such as overgrown bushes.
Page 11=&+%1'(-"0()#%>2',10&",?%5#'),'%()##%@ABBBABCCADEFE7Item 63129
GH=:IJ!K:LHIM!NOHMNI:NHNP: G:IQK
=PP%GIHI:O:NI
P)210&"4 The user is cautioned that changes or modifications
not expressly approved by the party responsible for compliance
could Void the users authority to operate the equipment.
This device complies with Part 15 of the FCC Rules Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
N!I:4% This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate
radio frequency energy and. if not installed and used in accordance With the
instructions, may cause harmful interference to radio communications However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
]CDd@%H9&2+)%L&);%%e%%P)#)3),),?%PH%F@fg]%%e%%@ABBBABCCADEFE
U0*01';%Fg%V)$%R)++)"1$
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality
and durability standards, and warrants to the original purchaser that this product is free from
defects in materials and workmanship for the period of 90 days from the date of purchase. This
warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or
accidents, repairs or alterations outside our facilities, criminal activity, improper installation,
normal wear and tear, or to lack of maintenance. We shall in no event be liable for death,
injuries to persons or property, or for incidental, contingent, special or consequential damages
arising from the use of our product. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation of exclusion may not apply to
you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with
transportation charges prepaid. Proof of purchase date and an explanation of the complaint
must accompany the merchandise. If our inspection verifies the defect, we will either repair or
replace the product at our election or we may elect to refund the purchase price if we cannot
readily and quickly provide you with a replacement. We will return repaired products at our
expense, but if we determine there is no defect, or that the defect resulted from causes not
within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
L'(&+;%G'+0)#%N2*3'+%\'+'4%
N&1'4 If product has no serial number, record month and year of purchase instead.
N&1'4 Replacement parts are not available. Reference UPC 193175352200.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Bunker Hill Security Item 63129-UPC 193175352200 Owner's manual

Type
Owner's manual

Bunker Hill Security Item 63129-UPC 193175352200 is a security camera system that includes a monitor and two cameras. The monitor has a 3.5-inch color screen and can display the feeds from both cameras simultaneously or switch between them manually or automatically. The cameras have a 540 TVL resolution and night vision capabilities, making them suitable for both indoor and outdoor use. The system is easy to set up and use, with plug-and-play installation and intuitive controls. It can be used for a variety of security applications, such as home surveillance, business security, and baby monitoring. Here are some of the key features and possible use cases of the Bunker Hill Security Item 63129-UPC 193175352200:

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI