Page is loading ...
Dok./Rev.-Nr. 10552_2018
Overview .....................................................................................4
Use ................................................................................................ 5
Scope of delivery/device parts ...................................................6
General information .................................................................... 7
Reading and storing the user manual ........................................... 7
Explanation of symbols .................................................................... 7
Safety ...........................................................................................9
Proper use ...........................................................................................9
Safety notes ........................................................................................9
General safety notes for power tools .............................................9
Residual risks .....................................................................................16
First use .......................................................................................17
Checking the drill and product contents ......................................17
Removing and charging the
battery
............................................
17
Checking the charge level of the
battery .....................................
18
Inserting and removing drills and drill bits
..................................
18
Using the drill .............................................................................19
Changing speeds ............................................................................. 19
Setting the torque ........................................................................... 19
Setting the di
rection of rotation ....................................................20
Switching the drill on and off ..........................................................21
Cleaning ..................................................................................... 22
Storage ...................................................................................... 23
Spare part list ............................................................................ 23
Technical data ........................................................................... 24
Noise/vibration information .................................................... 25
Declaration of conformity ......................................................... 27
Disposal ...................................................................................... 28
Disposing of the packaging ...........................................................28
Disposing of old devices .................................................................28
Warranty card ............................................................................ 29
Warranty conditions ..................................................................30
Contents
20V LITHIUM-ION
CORDLESS DRILL
Great care has gone into the manufacture of this product and it should there-
fore provide you with years of good service when used properly. In the event
of product failure within its intended use over the course of the first 3 years
elbissop sa ylkciuq sa melborp eht ydemer lliw ew ,esahcrup fo etad retfa
once it has been brought to our attention. In the unlikely event of such an
esaelp ,tcudorp eht tuoba noitamrofni yna eriuqer uoy fi ro ,ecnerrucco
dnuof eb ot era hcihw fo sliated ,secivres troppus enilpleh ruo aiv su tcatnoc
both in this manual and on the product itself.
PRODUCED IN CHINA FOR:
ALDI STORES LTD. PO BOX 26, ATHERSTONE
WARWICKSHIRE, CV9 2SH.
ALDI STORES (IRELAND) LTD.
PO BOX 726, NAAS, CO. KILDARE.
Visit us at www.aldi.com
User Manual
GB IRE
Original instructions
AFTER S
10552
ALES SUPPORT
support@coreservice.co.uk
YEARS
WARRANTY
3
01247 5150
01904 727506
GB
IRE
MODEL: D022-20V 01/2019
C
B
10
2
D
E
4
5
6
14
2
13
12
12
4 5
GB
GB
GBIRE
IRE
IRE
Product contents⁄device parts
1
Speed selector switch
2
Switch for the direction of rotation
3
On/Off switch
4
Battery
5
Charge level indicator
6
Release button
7
Integrated LED work light
8
Chuck
9
Torque control
10
Drills, 8×
Double-end bit, 1×; Bits, 8×; Connector, 1×
12
Charger
13
Quick charger (not shown) with connector cord
14
Button for the charge level indicator
11
A
9
1
3
2
4
6
7
5
8
/