Pro-Ject Rack it User manual

Pro-Ject
Brand
Pro-Ject
Model
Rack it
Category
Flat panel accessories
Type
User manual

Pro-Ject Rack it is a versatile and easy-to-assemble storage solution for your vinyl records. With its sturdy construction and adjustable shelves, it can accommodate a variety of record sizes and shapes. The Rack it is also stackable, so you can easily expand your storage capacity as your collection grows.

Here are some of the features and benefits of the Pro-Ject Rack it:

  • Sturdy construction: Made from high-quality MDF, the Rack it is built to last. It can support the weight of even the heaviest record collections.
  • Adjustable shelves: The shelves of the Rack it can be adjusted to accommodate different record sizes and shapes. This makes it easy to store your entire collection, from 7-inch singles to 12-inch LPs.

Pro-Ject Rack it is a versatile and easy-to-assemble storage solution for your vinyl records. With its sturdy construction and adjustable shelves, it can accommodate a variety of record sizes and shapes. The Rack it is also stackable, so you can easily expand your storage capacity as your collection grows.

Here are some of the features and benefits of the Pro-Ject Rack it:

  • Sturdy construction: Made from high-quality MDF, the Rack it is built to last. It can support the weight of even the heaviest record collections.
  • Adjustable shelves: The shelves of the Rack it can be adjusted to accommodate different record sizes and shapes. This makes it easy to store your entire collection, from 7-inch singles to 12-inch LPs.
Assembly Instructions
Rack it
© Pro-Ject Audio Systems · Pro-Ject Rack it · Revision 2018.09.07
2
Content:
2 Boards with the dimensions 536 x 25 x 440 mm (WxHxD)
2 Boards with the dimensions 440 x 25 x 376 mm (WxHxD)
8 Pieces metal dowels
16 Pieces wooden dowels
8 Pieces plastic heads
8 Pieces Cam Lock Nuts
Needed (not supplied):
1 Phillips head screwdriver
Preparation
Please remove the protection film from the boards.
Put the plastic heads on the threads of the metal dowels.
Place the metal- and wooden dowels according to the picture below. The Cam Lock Nuts have to be placed
in the respective holes of the smaller boards. When you put the boards together, please twist the Cam Lock
Nuts clock-wise, then the boards are fixed together and Rack it is finished.
Assembly
© Pro-Ject Audio Systems · Pro-Ject Rack it · Revision 2018.09.07
3
Service
Should you encounter a problem which you are not able to alleviate or identify despite the above information,
please contact your dealer for further advice. Only when the problem cannot be resolved there should the unit
be sent to the responsible distributor in your country.
Guarantee repairs will only be effected if the unit is returned correctly packaged. For this reason we recommend
keeping the original packaging.
Never return a record player without making sure that is it safely disassembled and correctly packaged in the
original packaging according to the diagrams on the last page of this user guide. Please remove these parts and
pack them separately: lid (10), counterweight (6), anti-skating weight (16) platter (5) and belt (3). Fit the
cartridge protection cap. Insert the transport lock for the tonearm (18) prior to carefully packaging the record
player.
Warranty
The manufacturer accepts no responsibility for damage caused by not adhering to these instructions
for use and/or by transportation without the original packaging. Modification or change to any part of
the product by unauthorized persons release the manufacturer from any liability over and above the
lawful rights of the customer.
Pro-Ject Audio Systems is a Registered Trademark
of H. Lichtenegger.
This guide was produced by: Pro-Ject Audio Systems
Copyright
©
2018. All rights reserved.
The information was correct at the time of going to
press. The manufacturer reserves the right to make
changes to the technical specification without prior
notice as deemed necessary to uphold the ongoing
process of technical development.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Pro-Ject Rack it User manual

Pro-Ject
Brand
Pro-Ject
Model
Rack it
Category
Flat panel accessories
Type
User manual

Pro-Ject Rack it is a versatile and easy-to-assemble storage solution for your vinyl records. With its sturdy construction and adjustable shelves, it can accommodate a variety of record sizes and shapes. The Rack it is also stackable, so you can easily expand your storage capacity as your collection grows.

Here are some of the features and benefits of the Pro-Ject Rack it:

  • Sturdy construction: Made from high-quality MDF, the Rack it is built to last. It can support the weight of even the heaviest record collections.
  • Adjustable shelves: The shelves of the Rack it can be adjusted to accommodate different record sizes and shapes. This makes it easy to store your entire collection, from 7-inch singles to 12-inch LPs.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents