Zanussi ZYB590 User manual

FR

Notice d'utilisation 2

EN

User manual 20

DE

Benutzerinformation 37

NL

Gebruiksaanwijzing 55

Four

Oven

Backofen

Oven

ZYB590

Page is loading ...

Contents

Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 20

Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 22

Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 22

Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 23

Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ 27

Cooking tables _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 28

Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 32

What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 34

Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 35

Electrical connection _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 35

Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ 35

Subject to change without notice

Safety information

Before the installation and use, read this manual carefully:

• For your personal safety and the safety of your property

• For the respect of the environment

• For the correct operation of the appliance.

Always keep these instructions with the appliance also if

you move or sell it.

The manufacturer is not responsible if incorrect installa-

tion or use results in damage.

Children and vulnerable people safety

• Do not let persons, children included, with reduced

physical sensory, reduced mental functions or lack of

experience and knowledge to use the appliance. They

must have supervision or instruction for the operation

of the appliance by a person who is responsible for

their safety.

• Keep all packaging away from children. There is the

risk of suffocation or physical injury.

• Keep children and small animals away from the appli-

ance when the door is open or the appliance is in op-

eration. There is the risk of injury or other permanent

disability.

• If the appliance has Switch-on lock or Key lock func-

tion, use it. It prevents children and small animals from

accidental use of the appliance.

General safety

• Do not change the specifications of this appliance.

There is the risk of injury and damage to the appliance.

• Do not let the appliance stay unattended during oper-

ation.

• Switch off the appliance after each use.

Installation

• Only an approved electrician can install and connect

the appliance. Contact an approved service centre. This

is to prevent the risks of structural damage or physical

injury.

• Make sure that the appliance is not damaged because

of transport. Do not connect a damaged appliance. If

necessary, contact the supplier.

• Remove all packaging, stickers and layers from the

appliance before first use. Do not remove the rating

plate. It can invalidate the guarantee.

• Fully obey the laws, ordinances, directives and stand-

ards in force in the country where you use the appliance

(safety regulations, recycling regulations, electrical or

gas safety rules etc.).

• Make sure that the appliance is disconnected from the

power supply during the installation.

• Be careful when you move the appliance. The appliance

is heavy. Always use safety gloves. Do not pull the

appliance by the handle.

• The appliance must have the electrical installation

which lets you disconnect the appliance from the mains

at all poles with a contact opening width of minimum

3 mm.

• You must have correct isolation devices: line protect-

ing cut-outs, fuses (screw type fuses removed from the

holder), earth leakage trips and contactors.

• The shock protection parts must be fixed in such a way

that they cannot be undone without tools.

• Some parts of the appliance carry current. Close the

appliance with furniture and make sure that there are

no free spaces. It prevents electrical shock because you

cannot accidentally touch dangerous parts.

• Before the installation, make sure that the kitchen cab-

inet has the recess dimensions applicable.

• Make sure that the appliance is installed below and

adjacent safe structures.

20

• Keep the minimum distances to the other appliances

and units.

• Install the appliance with its back and one side close

to the higher appliance. The other side must be close

to appliance with the same height.

• The appliance cannot be positioned on a base.

• Built in ovens and built in cooking surfaces are at-

tached with special connection system. To prevent

damage to the appliance, only use an appliance with

the appliances from the same manufacturer.

Electrical connection

• The appliance must be earthed.

• Make sure that the electrical data on the rating plate

agree with your domestic power supply.

• Information on the voltage is on the rating plate.

• Always use a correctly installed shockproof socket.

• When you connect electrical appliances to mains sock-

ets, do not let cables touch or come near the hot ap-

pliance door.

• Do not use multi-way plugs, connectors and extension

cables. There is the risk of fire.

• Do not replace or change the mains cable. Contact the

service centre.

• Make sure not to squash or cause damage to the mains

plug (if applicable) and cable behind the appliance.

• Make sure that the mains connection is accessible after

the installation.

• Do not pull the mains cable to disconnect the appli-

ance. Always pull the mains plug – if applicable.

Use

• The appliance is only for domestic use. Do not use the

appliance for commercial and industrial use.

• Only use the appliance for domestic cooking tasks.

This is to prevent physical injury to persons or prevent

damage to property.

• Do not use the appliance as a work surface or storage

surface.

• Do not put flammable products or items that are wet

with flammable products, and/or fusible objects (made

of plastic or aluminium) in, near or on the appliance.

There is the risk of explosion or fire.

• The interior of the appliance becomes hot during use.

There is the risk of burns. Use gloves when you insert

or remove the accessories or pots.

• Be careful when you remove or install the accessories

to prevent damage to the oven enamel.

• Always stay away from the appliance when you open

the door while the appliance is in operation. Hot steam

can release. There is the risk of skin burns.

• To prevent damage or discoloration to the enamel:

– do not put any objects directly on the appliance floor

and do not cover it with aluminium foil;

– do not put hot water directly into the appliance;

– do not keep moist dishes and food in the appliance

after you finish the cooking.

• Discoloration of the enamel has no effect on the per-

formance of the appliance

• Do not use this appliance if it is in contact with water.

Do not operate the appliance with wet hands.

• Do not apply pressure on the open door.

• Always close the appliance door when you cook, even

while grilling.

Care and cleaning

• Before maintenance, switch off the appliance and dis-

connect the appliance from the power supply.

• Before maintenance, make sure that the appliance is

cold. There is the risk of burns. There is the risk that

the glass panels can break.

• Keep the appliance clean at all times. A build-up of fats

or other foodstuff can result in a fire.

• Regular cleaning prevents the surface material from

deteriorating

• For your personal safety and the safety of your prop-

erty, only clean the appliance with water and a soap.

Do not use flammable products or products that can

cause corrosion.

• Do not clean the appliance with steam cleaners, high-

pressure cleaners, sharp objects, abrasive cleaning

agents, abrasive sponges and stain removers

• Do not clean the glass door with abrasive cleaning

agents or metal scraper. Heat resistant surface of the

inner glass can break and shatter.

• When the door glass panels are damaged they become

weak and can break. You must replace them. Contact

the service centre.

• Be careful when you remove the door from the appli-

ance. The door is heavy!

• Do not clean catalytic enamel (if applicable).

21

Pyrolytic cleaning

• Do not leave the appliance unattended during Pyrolytic

cleaning.

• Do not try to open the door and do not cut the power

supply during Pyrolytic cleaning.

• Keep children away during pyrolytic cleaning. The ap-

pliance becomes very hot. There is the risk of burns.

• During pyrolytic cleaning, stubborn dirt can cause

discoloration to the enamel. Discoloration to the en-

amel has no effect on the performance of the appliance

Oven lamp

• Disconnect the appliance from the power supply before

the replacement of the oven lamp. There is the risk of

electrical shock!

Service centre

• Only an approved engineer can repair or work on the

appliance. Contact an approved service centre.

• Use only original spare parts.

Disposal of the appliance

• To prevent the risk of physical injury or damage

– Disconnect the appliance from the power supply.

– Cut off the mains cable and discard it.

– Discard the door catch. This prevents children or

small animals from being closed inside of the ap-

pliance. There is the risk of suffocation.

Product description

General overview

1

6

7

3

2

4

5

1 Control panel

2 Digital display

3 Air vents for cooling fan

4 Heating element

5 Oven lamp

6 Fan

7 Rating plate

Oven accessories

• Oven shelf

For cookware, cake tins, roasts.

• Flat baking tray

For cakes and biscuits.

• Deep roasting pan

To bake and roast or as pan to collect fat.

Before first use

Warning! Refer to "Safety information" chapter.

Initial Cleaning

• Remove all parts from the appliance.

• Clean the appliance before first use.

22

Caution! Do not use abrasive cleaning agents! This

can damage the surface. Refer to chapter "Care and

Cleaning".

Setting and changing the time

Set the time first to operate the oven.

When you connect the oven to the electrical supply or after

a power cut, the symbol for the time

and auto-

matically flashes.

12

Set the correct time with or .

Changing the time

1.

Push

again and again until the symbol flash-

es.

2.

Set the correct time with

or .

The clock shows the time and the flashing stops after

approximately 5 seconds .

Demo mode

You can do the test of the oven or see all the operating

steps in the Demo mode. The oven does not use the heat.

You can use Demo mode only when the appliance is first

connected or there was a power cut and "12:00" and

flash on the display.

Switching on the Demo mode

1.

Push

button for approximately 2 seconds. An

acoustic signal sounds.

2.

Push

and " " buttons at the same time. An

acoustic signal sounds and the display shows

"12:00".

If the display shows

, the Demo mode is on.

Switching off the Demo mode

1. Switch off the oven.

2. Follow above procedure again.

If there is a power cut the Demo mode function stays

saved.

Preheating

Set Conventional Cooking function and maximum tem-

perature and run an empty oven for 45 minutes (refer to

"Setting the oven function"). This is to burn off any residue

from the cavity surface. Accessories can become hotter

than in normal use. During this period an odour can be

emitted. This is normal. Make sure the room is well ven-

tilated.

Daily use

Warning! Refer to "Safety information" chapter.

The display

1 2 3

1 Cooking function

2 Temperature

3 Time

23

Button Function Description

ON/OFF To switch the appliance on or off.

SELECTOR To set the oven function.

RAPID HEAT UP To switch the rapid heat-up function on.

PYROLYTIC CLEANING To start the Pyrolytic cleaning.

/

PLUS, MINUS To adjust the values (temperature and time).

CLOCK To set the clock function.

Setting the oven function

12

1.

Push

again and again until necessary function

indicator flashes.

An automatic temperature comes on in the display. If

you do not change it in approximately 5 seconds, the

oven starts to operate.

2.

To change the temperature, use

or button.

If there is a power cut, the programmer keeps all the

settings for approximately 3 minutes. After more

than 3 minutes without power supply, you have to do the

settings (also the time of day) again.

Oven functions

Oven Function Application

Fan cooking

To roast or roast and bake the food that requires the same

cooking temperature, using more than one shelf, without

flavour transference.

Pre-set temperature: 175ºC

Conventional cooking

Heats both from the top and bottom element. To bake and

roast on one oven level.

Pre-set temperature: 200°C

Inner Grill

To grill flat food items in small quantities in the middle

of the shelf. To make toasts.

Pre-set temperature: 250°C

Thermal grilling

The grill element and the oven fan supply hot air around

the food. To cook large pieces of meat.

Pre-set temperature: 180°C

Important! Maximum temperature for this function: 200

°C.

24

Oven Function Application

Pizza Oven

The bottom element provides direct heat to the base of

pizzas, quiches or pies, while the fan ensures air is cir-

culated to cook the pizza toppings or pie fillings.

Pre-set temperature: 175°C

Full Grill

The full grill element is on. To grill flat food items in large

quantities. To make toasts.

Pre-set temperature: 250°C

Bottom oven

element

Heats only from the bottom of the oven. To bake cakes

with crispy or crusty bases.

Pre-set temperature: 250ºC

Top heating element

Heats only from the top of the oven. To complete cooked

dish.

Pre-set temperature: 250 °C

Defrosting

To defrost frozen food.

Suitable for defrosting delicate food, e.g. cream filled ga-

teaux, iced cakes, pastries, bread and other food made of

yeast.

Pyrolytic cleaning To remove stubborn dirt.

Setting the clock functions

12

1.

Push

again and again until necessary function

indicator flashes.

2.

To set the time for Minute minder

, Duration

or End , use or button.

The related function indicator comes on.

When the time period is completed, the function in-

dicator flashes and an acoustic signal sounds for 2

minutes.

With the functions Duration

and End the

oven switches off automatically.

3. Push any button to stop the signal.

Cancelling the clock functions

1.

Push

again and again until necessary function

indicator and

flashes.

2.

Push "

" again and again until the time is "00:00".

Clock function Application

Time of day Shows the time. To set, change or check the time.

Minute minder To set a countdown time.

A signal sounds, after the time period is completed.

This function has no effect on the operation of the oven.

Duration To set how long the oven has to be in operation.

25

Clock function Application

End To set the switch-off time for an oven function.

Duration and End can be used at the same

time, if the oven is to be switched on and off auto-

matically later. In this case first set Duration

, then

End .

Additional functions

Control Beep

Switching off the control beep

1.

Stop the oven with the On/Off control

.

2.

Touch and hold the

and controls at the same

time, until a sound operates (approximately 2 sec-

onds).

The control beep does not operate.

Switching on the control beep

1.

Touch and hold the

and controls at the same

time, until a sound operates (approximately 2 sec-

onds).

2. The control beep operates again.

Automatic cut-out

The appliance switches off after some time:

• if you do not switch off the appliance;

• if you do not change the oven temperature.

The last temperature set flashes in the temperature dis-

play.

Oven temperature Switch-off time

30 °C -120 °C 12.5 h.

120 °C - 200 °C 8.5 h.

200 °C -250 °C 5.5 h.

250 °C -maximum °C 3.0 h.

After an automatic cut-out, switch off the oven fully. Then

you can switch it on again.

Important! If you set the clock function Duration or

End , the automatic cut-out switches off.

Switch-on lock

When the switch-on lock is set, you can not operate

the oven.

Switching on the switch-on lock

2.

Push Selection

and at the same time, until the

display shows “SAFE”. The switch-on lock is switch-

ed on.

Switching off the switch-on lock

To switch off the switch-on lock, obey the same proce-

dure.

Residual Heat function

With Duration function, the oven automatically switches

off some minutes before the time period is completed. The

oven uses the residual heat to complete the cooking with-

out energy consumption.

Important! Residual heat function is applicable only if the

Duration is more than 15 minutes.

Rapid heat-up function

With Rapid heat-up function you decrease the pre-heating

time. You can use it with each cooking function.

Important! Do not put the food into the oven, until Rapid

heat up is completed.

1. Set an oven function.

If necessary, change the recommended temperature.

2.

Push

button. The display shows "FHU" and Rapid

heat-up function operates.

26

1.

Stop the oven with the On/Off control

.

3. When Rapid heat up is completed, an acoustic signal

sounds and "FHU" goes out.

At this time the appliance continues to heat in the set

oven function and oven temperature.

4. Put the food in the oven.

Error code

If some parameters are not correct, the control unit stops

the functions which operate and the display shows the

related error code. Refer to "What to do if" chapter.

Cooling fan

When the appliance operates, the cooling fan switches on

automatically to keep the surfaces of the appliance cool.

If you switch off the appliance, the cooling fan continues

to operate until the appliance cools down.

Safety thermostat

To prevent dangerous overheating (due to incorrect use

of the appliance or defective components), the oven has

a safety thermostat, which interrupts the power supply.

The oven switches back on again automatically, when the

temperature drops.

Helpful hints and tips

Warning! Refer to "Safety information" chapter.

• The appliance has four shelf levels. Count the shelf

levels from the bottom of the appliance floor.

• You can cook different dishes on two levels at the same

time. Place the shelves on level 1 and 3.

• The appliance has a special system which circulates

the air and constantly recycles the steam. With this

system you can to cook in a steamy environment and

keep the food soft inside and crusty outside. It decrea-

ses the cooking time and energy consumption to a

minimum.

• Moisture can condense in the appliance or on the glass

doors. This is normal. Always stand back form the ap-

pliance when you open the appliance door while cook-

ing. To decrease the condensation, run the appliance

for 10 minutes before cooking.

• Wipe away moisture after every use of the appliance.

• Do not put the objects directly on the appliance floor

and do not cover the components with aluminium foil

when you cook. This can change the baking results and

damage the enamel coating.

Baking cakes

• The best temperature for baking cakes is between 150

°C and 200 °C.

• Preheat the oven for approximately 10 minutes before

baking.

• Do not open the oven door before 3/4 of the set cooking

time is up.

• If you use two baking trays at the same time, keep one

level empty between them.

Cooking meat and fish

• Do not cook meat with weight below 1 kg. Cooking too

small quantities makes the meat too dry.

• To keep the red meat well cooked outside and juicy

inside set the temperature between 200 °C-250 °C.

• For white meat, poultry and fish set the temperature

between 150°C-175°C.

• Use a dripping pan for very fatty food to prevent the

oven from stains that can be permanent.

• Leave the meat for approximately 15 minutes before

carving so that the juice does not seep out.

• To prevent too much smoke in the oven during roast-

ing, add some water into the dripping pan. To prevent

the smoke condensation, add water each time after it

dries up.

27

Cooking tables

Baking and roasting table

CAKES

TYPE OF DISH

Conventional cook-

ing

Fan cooking

Cooking

time [min]

Notes

Level

Temp

[°C]

Level

Temp

[°C]

Whisked recipies 2 170 2 (1 and

3)

160 45-60 In cake mould

Shortbread dough 2 170 2 (1 and

3)

160 24-34 In cake mould

Butter-milk cheese

cake

1 170 2 160 60-80 In cake mould 26 cm

Apple cake (Apple

pie)

1 170 2 left +

right

160 100-120 2 cake moulds of 20 cm on the

oven shelf

Strudel 2 175 2 150 60-80 On baking tray

Jam- tart 2 170 2 160 30-40 In cake mould 26 cm

Fruit cake 2 170 2 155 60-70 In cake mould 26 cm

Sponge cake (Fat-

less sponge cake)

2 170 2 160 35-45 In cake mould 26 cm

Christmas cake/

Rich fruit cake

2 170 2 160 50-60 In cake mould 20 cm

Plum cake 2 170 2 160 50-60

In bread tin

1)

Small cakes 3 170 3 (1 and

3)

160 20-30 On flat baking tray

Biscuits 3 150 3 150 20-30

On flat baking tray

1)

Meringues 3 100 3 100 90-120 On flat baking tray

Buns 3 190 3 180 15-20

On flat baking tray

1)

Choux 3 190 3 180 25-35

On flat baking tray

1)

Plate tarts 3 180 2 170 45-70 In cake mould 20 cm

Victoria sandwich 1 or 2 180 2 170 40-55 Left + right in cake mould 20 cm

1) Preheat for 10 minutes.

28

BREAD AND PIZZA

TYPE OF DISH

Conventional cook-

ing

Fan cooking

Cooking

time [min]

Notes

Level

Temp

[°C]

Level

Temp

[°C]

White bread 1 190 1 190 60-70

1-2 pieces, 500 gr one piece

1)

Rye bread 1 190 1 180 30-45 In bread tin

Bread rolls 2 190 2 (1 and

3)

180 25-40

6-8 rolls on flat baking tray

1)

Pizza 1 190 1 190 20-30

On deep roasting pan

1)

Scones 3 200 2 190 10~20

On flat baking tray

1)

1) Preheat for 10 minutes.

FLANS

TYPE OF DISH

Conventional cook-

ing

Fan cooking

Cooking

time [min]

Notes

Level

Temp

[°C]

Level

Temp

[°C]

Pasta flan 2 180 2 180 40-50 In mould

Vegetable flan 2 200 2 175 45-60 In mould

Quiches 1 190 1 190 40-50 In mould

Lasagne 2 200 2 200 25-40 In mould

Cannelloni 2 200 2 190 25-40 In mould

Yorkshire pudding 2 220 2 210 20-30

6 pudding mould

1)

1) Preheat for 10 minutes.

MEAT

TYPE OF DISH

Conventional cook-

ing

Fan cooking

Cooking

time [min]

Notes

Level

Temp

[°C]

Level

Temp

[°C]

Beef 2 200 2 190 50-70 On oven shelf and deep roasting

pan

Pork 2 180 2 180 90-120 On oven shelf and deep roasting

pan

Veal 2 190 2 175 90-120 On oven shelf and deep roasting

pan

29

TYPE OF DISH

Conventional cook-

ing

Fan cooking

Cooking

time [min]

Notes

Level

Temp

[°C]

Level

Temp

[°C]

English roast beef

rare

2 210 2 200 44-50 On oven shelf and deep roasting

pan

English roast beef

medium

2 210 2 200 51-55 On oven shelf and deep roasting

pan

English roast beef

well done

2 210 2 200 55-60 On oven shelf and deep roasting

pan

Shoulder of pork 2 180 2 170 120-150 On deep roasting pan

Shin of pork 2 180 2 160 100-120 2 pieces on deep roasting pan

Lamb 2 190 2 190 110-130 Leg

Chicken 2 200 2 200 70-85 Whole on deep roasting pan

Turkey 1 180 1 160 210-240 Whole on deep roasting pan

Duck 2 175 2 160 120-150 Whole on deep roasting pan

Goose 1 175 1 160 150-200 Whole on deep roasting pan

Rabbit 2 190 2 175 60-80 Cut in pieces

Hare 2 190 2 175 150-200 Cut in pieces

Pheasant 2 190 2 175 90-120 Whole on deep roasting pan

FISH

TYPE OF DISH

Conventional cook-

ing

Fan cooking

Cooking

time [min]

Notes

Level

Temp

[°C]

Level

Temp

[°C]

Trout/Sea bream 2 190 2 (1 and

3)

175 40-55 3-4 fishes

Tuna fish/Salmon 2 190 2 (1 and

3)

175 35-60 4-6 fillets

Grilling

Preheat the empty oven for 10 minutes, before

cooking.

Quantity Grilling

Cooking time in minutes

TYPE OF DISH Pieces g

level

Temp. (°C) 1st side 2nd side

Fillet steaks 4 800 3 250 12-15 12-14

30

Quantity Grilling

Cooking time in minutes

TYPE OF DISH Pieces g

level

Temp. (°C) 1st side 2nd side

Beef steaks 4 600 3 250 10-12 6-8

Sausages 8 / 3 250 12-15 10-12

Pork chops 4 600 3 250 12-16 12-14

Chicken (cut in 2) 2 1000 3 250 30-35 25-30

Kebabs 4 / 3 250 10-15 10-12

Breast of chicken 4 400 3 250 12-15 12-14

Hamburger 6 600 3 250 20-30

Fish Fillet 4 400 3 250 12-14 10-12

Toasted sandwiches 4-6 / 3 250 5-7 /

Toast 4-6 / 3 250 2-4 2-3

Thermal grilling

Warning! Use this function with a maximum

temperature of 200°C.

Quantity Grilling

Cooking time in minutes

TYPE OF DISH Pieces g

level

Temp. (°C) 1st side 2nd side

Rolled joints (turkey) 1 1000 3 200 30-40 20-30

Chicken (cut in two) 2 1000 3 200 25-30 20-30

Chicken drumsticks 6 - 3 200 15-20 15-18

Quail 4 500 3 200 25-30 20-25

Vegetable gratin - - 3 200 20-25 -

pieces. Scallops - - 3 200 15-20 -

Mackerel 2-4 - 3 200 15-20 10-15

Fish slices 4-6 800 3 200 12-15 8-10

Pizza

Preheat the empty oven for 10 minutes, before

cooking.

TYPE OF DISH

Pizza Function

Cooking time in minutes NOTES

Level temp.°C

Pizza , large 1 200 15~25 on flat baking tray

Pizza , small 1 200 10~20

on flat baking tray or on

oven shelf

31

TYPE OF DISH

Pizza Function

Cooking time in minutes NOTES

Level temp.°C

Bread rolls 1 200 15~25 on flat baking tray

Care and cleaning

Warning! Refer to "Safety information" chapter.

Pyrolytic cleaning

Warning! The oven becomes very hot. There is the

risk of burns!

Important! Do not use Pyrolytic cleaning function and

hob at the same time (if it is installed with the appliance).

It can cause overheating and damage the appliance.

Before Pyrolytic cleaning:

• Remove all parts from the oven.

To remove shelf supports rails refer to section "Re-

moving the shelf support rails".

• Close the oven door correctly.

1. Remove the worst of the residual dirt manually.

2.

Push

button again and again until the display

shows

.

–

“ Pyro ” message and appear on the display.

– An acoustic signal sounds. This is to remind you

to remove all parts from the oven.

– The temperature display shows „P1“ or „P2“

– The clock display shows "2:00" or "2:30"

–

Duration

flashes for approximately 5 seconds.

3.

While Duration

flashes, use or to set the

necessary length for the procedure:

– 2:00 for a low degree of dirt,

– 2:30 for a high degree of dirt.

4.

Push the Pyrolytic cleaning

button to start the

cleaning.

When the oven starts to heat up, the rising bars on

the symbol

indicate that the temperature inside the

oven increases.

When the oven reaches pre-set temperature, the door

locks and

appears on the display.

At the end of the pyrolytic cleaning process, the display

shows the time of day. The oven door is locked. Once the

oven cools down, an acoustic signal sounds and the door

unlocks.

To stop the pyrolytic cleaning cycle at any time,

push

button.

Wait until the door lock is off to use the oven.

Switch off time for Pyrolytic cleaning

You can set the switch off time for Pyrolytic cleaning

with the clock function End

.

1. Repeat above procedure from point 1 to point 3.

2.

Push the time function button

.

The display shows

and the flashing arrow.

3.

Push

or to set required end of the cycle time.

Cleaning the oven door

The oven door has four panels of glass.

Remove the oven door and the internal panels of glass to

clean it.

Removing the oven door and the internal panels of glass

1

Open the door fully

and hold the two door

hinges .

2

Lift and turn the levers

on the two hinges

32

3

Close the oven door to

approx. 45°. Then pull for-

ward and remove it from

its seat.

4

Place the door on a

stable surface and a soft

cloth.

5

Release the locking

system to remove the in-

ternal panel of glass.

6

90°

7

Turn 2 fasteners by

90° and remove them from

their seats.

2

1

8

Carefully lift and re-

move the panels of glass

one after another. Start

from the uppermost.

Clean the glass panels with water and soap. Dry them

carefully.

Inserting the door and the glass panels

When the cleaning procedure is completed, insert the

glass panels and the oven door. To do so, follow above

steps in opposite order.

The glass panels are

marked. Make sure you

put the glass panels back

in the correct order, as the

picture shows.

Make sure you insert the

internal panels of glass in-

to the right seats, as the

picture shows.

Oven lamp

Before you change the oven lamp:

• Switch off the oven.

• Remove the fuses in the fuse box or switch off the cir-

cuit breaker.

Put a cloth on the bottom of the oven for protection

of the oven light and glass cover.

Replacing the oven light bulb/cleaning the glass

cover

Warning! Be careful! There is the risk of electrical

shock!

1. Turn the glass cover anti-clockwise to remove it.

2. Clean the glass cover.

3. Replace the oven light bulb with applicable 300°C

heat-resistant oven light bulb. New oven light bulb

must have the same parameters as your previous one.

4. Install the glass cover.

33

Shelf Support Rails

Removing the shelf support rails

1

Pull the front of the

shelf support rail away

from the side wall.

1

2

Pull the rear shelf sup-

port rail away from the side

wall and remove it.

Installing the shelf support rails

Install the shelf support rails in opposite sequence.

The rounded ends of the shelf support rails must

point to the front!

What to do if…

Warning! Refer to "Safety information" chapter.

Problem Possible cause Remedy

The oven does not heat up The oven is switched off Switch on the oven

The clock is not set Set the clock

The necessary settings are not set Check the settings

The automatic switch off is on Refer to “Automatic switch off”

The switch-on lock is on Refer to "Switching off the switch-on

lock"

The fuse in the fuse box is released Check the fuse

If the fuse is released more than one time,

contact a qualified electrician

Demo mode is on Refer to "Demo mode"

The display shows an error

code “F.."

There is an electronic fault. Write down the error code and contact

the Service Center.

The oven lamp does not op-

erate

The oven lamp is defective Replace the oven lamp

Steam and condensation set-

tle on the food and in the oven

cavity

You left the dish in the oven for too long Do not leave the dishes in the oven for

longer than 15-20 minutes after the

cooking process ends

If you cannot find a solution to the problem yourself,

contact your dealer or the service centre.

The necessary data for the service centre is on the rating

plate. The rating plate is on the front frame of the oven

cavity.

34

We recommend that you write the data here:

Model (MOD.) .........................................

Product number (PNC) .........................................

Serial number (S.N.) .........................................

Installation

Warning! Refer to "Safety information" chapter.

560

570

540

20

590

594

7

50

550

min

587

560-570

550 min

600

560-570

80÷100

A

B

Electrical connection

Warning! Refer to "Safety information" chapter.

Electrical installation

Warning! Only a qualified and competent person

must do the electrical installation.

The manufacturer is not responsible if you do not

follow safety precautions from chapter "Safety".

This appliance is only supplied with a main cable.

Environment concerns

The symbol on the product or on its packaging

indicates that this product may not be treated as

household waste. Instead it should be taken to the

appropriate collection point for the recycling of electrical

and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by inappropriate

waste handling of this product. For more detailed

information about recycling of this product, please

contact your local council, your household waste disposal

service or the shop where you purchased the product.

35

Packaging material

The packaging material is environmentally-friendly

and recyclable. Plastic parts are marked with international

abbreviations such as PE, PS, etc. Dispose of the pack-

aging material in the containers provided for this purpose

at your local waste management facility.

36

Page is loading ...

Zanussi ZYB590 User manual

This manual is also suitable for

Zanussi ZYB590 User manual

in other languages

Related papers

Other documents