Adidas Performance ADBE-10231 Assembly Manual

Hello! I am an AI chatbot trained to assist you with the Adidas Performance ADBE-10231 Assembly Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

ADBE-10231 AB BOARD

ASSEMBLY MANUAL

PART LIST

PART

NO.

DESCRIPTION QTY

1 BACK PAD FRAME 1

2 FRONT INCLINE FRAME 1

3 ADJUSTABLE BOTTOM FRAME 1

4 BACK PAD 1

5 SQUARE PLUG(38MM) 2

6 FOAM TUBE 1

7 ROLLER PADS 4

8 INCLINE ADJUSTMENT FOAM TUBE 1

9 INCLINE ADJUSTMENT KNOB 1

10 ROUND END CAP(38MM) 4

11 HEX BOLT(M8*55MM) 1

12 NYLON NUT M8 1

13 QUICK PIN 1

14 WASHER 6*16MM 4

15 ROUND HEAD PHILLIPS SCREWS(M6*15MM) 4

16 WASHER 8*25MM 1

17 ROUND PLUG(25.4MM) 4

PARTS CHECK LIST

HARDWARE PACK CHECK LIST

ASSEMBLY STEPS :

ATTACH THE BACK PAD FRAME(1) TO THE BRACKET ON FRONT INCLINE FRAME(2), THEN

INSERT QUICK PIN(13), FASTEN THE HEX BOLT M8*55 (11) TO FRAME WITH NYLON NUT M8

(12) AND WASHER 8 X 25MM (16).

INSTALL THE ADJUSTABLE BOTTOM FRAME(3) INTO FRONT INCLINE FRAME(2). INSTALL

THE INCLINE ADJUSTMENT FOAM TUBE(8) THROUGH FRONT INCLINE FRAME(2) AND

ADJUSTABLE BOTTOM FRAME(3) IN PROPER HEIGHT THEN FASTEN INCLINE ADJUSTMENT

KNOB (9). ATTACH THE FOAM GRIPS (7) ONTO BOTH SIDES OF THE INCLINE ADJUSTMENT

FOAM TUBE(8).

ATTACH THE FOAM TUBE(6) THROUH THE TOP HOLES OF FRONT INCLINE FRAME(2) AND

ATTACH FOAM GRIPS (7) ONTO BOTH SIDES OF FOAM TUBE (6).

ASSEMBLY COMPLETE.