Hitachi PJ-TX100E User manual

Projector

PJ-TX100

PJ-TX100W/E/U

ENGLISH

FRANÇAIS

DEUTSCH

ESPAÑOL

ITALIANO

TECHNICAL

User's Manual - Operating Guide

Please read this user's manual thoroughly to ensure correct usage understanding.

Manuel d'utilisation - Guide d'utilisation

Nous vous recommandons de lire attentivement ce manuel pour bien assimiler le

fonctionnement de l'appareil.

Bedienungsanleitung - Benutzerhandbuch

Um zu gewährleisten, dass Sie die Bedienung des Geräts verstanden haben, lesen Sie

dieses Handbuch bitte sorgfältig.

Manual de usuario - Guía de funcionamiento

Lea atentamente el manual de usuario del proyector para garantizar un uso adecuado del

mismo.

Manuale d'istruzioni - Guida operativa

Vi preghiamo di leggere attentamente il manuale d'istruzioni per garantire una corretta

comprensione delle istruzioni.

TECHNICAL

1

ENGLISH

Projector

PJ-TX100

User's Manual - Operating Guide

Thank you for purchasing this projector.

WARNING ►Before using, read the "User's Manual - Safety Guide" and

these manuals to ensure correct usage through understanding. After reading,

store them in a safe place for future reference.

About this manual

Various symbols are used in this manual. The meanings of these symbols are

described below.

WARNING This symbol indicates information that , if ignored, could possibly

result in personal injury or even death due to incorrect handling.

CAUTION This symbol indicates information that , if ignored, could result

possibly in personal injury or physical damage due to incorrect

handling.



Please refer to the pages written following this symbol.

NOTE • The information in this manual is subject to chance without notice.

• The manufacture assumes no responsibility for any errors that may appear in this manual.

• The reproductiob, transmission or use of this document or contents is not permitted without

express written authority.

Trademark acknowledgment

• VGA and XGA are registered trademarks of the International Business Machines

Corporation.

• Apple and Mac are registrered trademarks of the Apple Computer, Inc.

• VESA and SVGA are trademarks of the Video Electronics Standard Association.

• Internet Explorer is a trademark of Microsoft Corporation.

All other trademarks are the property of their respective owners.

2

About this manual . . . . . . . . . . 1

Contents . . . . . . . . . . . . . . . . . 2

Projector features . . . . . . . . . . 3

Preparations . . . . . . . . . . . . . . 3

About contents of package . . . . . . . 3

Fastening the lens cover . . . . . . . . . 3

Part names . . . . . . . . . . . . . . . 4

Projector . . . . . . . . . . . . . . . . . . . . . 4

Remote control . . . . . . . . . . . . . . . . 5

Setting up . . . . . . . . . . . . . . . . 6

Arrangement . . . . . . . . . . . . . . . . . . 6

Using the lens shift dials . . . . . . . . . 7

Adjusting the projector's elevator . . 7

Connecting your devices . . . . . . . . . 8

Connecting power supply . . . . . . . 10

Remote control . . . . . . . . . . . 10

Putting batteries . . . . . . . . . . . . . . 10

Using the LIGHT button . . . . . . . . . .11

Using the remote control . . . . . . . . .11

Power on/off . . . . . . . . . . . . . 12

Turning on the power . . . . . . . . . . . 12

Turning off the power . . . . . . . . . . . 12

Operating . . . . . . . . . . . . . . . 13

Selecting an input signal . . . . . . . . 13

Selecting an aspect ratio . . . . . . . . 13

Adjusting the zoom and focus . . . . 14

Using the automatic

adjustment feature . . . . . . . . . . . . . 14

Improving the contrast ratio . . . . . . 14

Selecting a mode of picture type . . 15

Adjusting a black image . . . . . . . . 15

Adjusting the picture . . . . . . . . . . . 16

Recalling your adjustment . . . . . . . 16

Multifunctional settings . . . . 17

Using the menu function . . . . . . . . 17

EASY Menu . . . . . . . . . . . . . . . . . . 18

ASPECT, KEYSTONE, MODE,

OPTICAL BLACK, BRIGHT, CONTRAST,

COLOR, TINT, SHRPNESS, WHISPER,

MIRROR, RESET, FILTER TIME,

LANGUAGE, Go To Advanced Menu

Contents

PICTURE Menu . . . . . . . . . . . . . . . 19

BRIGHT, CONTRAST, GAMMA, COLOR TEMP,

COLOR, TINT, SHARPNESS, PROGRESSIVE,

MY MEMORY

Adjustment steps of the CUSTOM GAMMA

or the CUSTOM COLOR TEMP

. . . 21

IMAGE Menu . . . . . . . . . . . . . . . . . 22

ASPECT, OVER SCAN, V POSITION,

H POSITION, H PHASE, H SIZE,

AUTO ADJUST

INPUT Menu . . . . . . . . . . . . . . . . . 24

COLOR SPACE, COMPONENT,

VIDEO FORMAT, DVI, S-ASPECT,

INFORMATION

SETUP Menu . . . . . . . . . . . . . . . . . 26

KEYSTONE, WHISPER, IRIS, MIRROR

SCREEN Menu . . . . . . . . . . . . . . . 27

LANGUAGE, MENU POSITION,

OSD BRIGHT, START UP, My Screen,

My Screen Lock, MESSAGE

How to register your picture as the

MyScreen . . . . . . . . . . . . . . . . . . 28

OPTION Menu . . . . . . . . . . . . . . . . 29

AUTO OFF, LAMP TIME, FILTER TIME, SERVICE

Maintenance . . . . . . . . . . . . . 31

Lamp . . . . . . . . . . . . . . . . . . . . . . . 32

Air ﬁ lter . . . . . . . . . . . . . . . . . . . . . 33

Inside of the projector . . . . . . . . . . 34

Caring for the lens . . . . . . . . . . . . . 34

Caring for the cabinet and remote control

. . 34

Troubleshooting . . . . . . . . . . 35

Related messages . . . . . . . . . . . . . 35

Regarding the indicator lamps . . . . 37

Phenomena that may easily be

mistaken for machine defects . . . . 39

Warranty and after-service

. . . 41

Speciﬁ cations . . . . . . . . . . . . 41

Technical (English only)

(Please see the end of this book,

although only in English.)

 

3

ENGLISH

Projector features / Preparations

Projector

features

This projector is used to project various computer signals as well as NTSC/PAL/

SECAP video signals onto a screen. Little space is required for installation and

large images can easily be realized.

This is the entertainment projector that will turn your room into a high

deﬁ nition theater!



Super focus ED (Extra-low dispersion) lenses are adopted for the highest

possible image quality.



720P wide LCD panels realize faithful reproduction of high-deﬁ nition images.



Motorized iris control is provided for realizing ﬁ lm-like images with blacker

black.



1.6x zoom lens and the optical lens shift allow ﬂ exible installation and viewing

position.

Preparations

About contents of package

Please see the "Contents of package" of the "User's manual - Quick guide". Your

projector should come with the items shown there. Contact immediately your

dealer if anything is missing.

NOTE • Keep the original packing materials for future reshipment. For

moving the projector, be sure to use the original packing material. Use special

caution for the lens part.

Strap ring

Strap

Strap ring

Fastening the lens cover

To avoid losing, please fasten the lens cover to the projector using the strap.

1.

Fix the strap to the strap ring of lens cover.

2.

Put the strap into the groove on rivet.

3.

Push the rivet into the strap hole.

Bottom side

Strap hole

4

Part names

Lens (



34)

radiates powerful light for projecting an image.

Lens cover (



3)

Vertical

lens shift dials (



7)

Horizontal

lens shift dials (



7)

Filter cover (



33)

(An air ﬁ lter is inside.)

Elevator button (



7)

is on the both sides.

Elevator foot (



7)

is on the both sides.

Remote sensor (



11)

Zoom knob (



14)

Focus knob (



14)

Exhaust vent (



6)

AC inlet (



10)

Power switch (



12)

Elevator button

DVI-D

Y

C

B/PB

CR/PR

COMPONENT VIDEO

S-VIDEO

VIDEO

COMPUTER CONTROL

DVI-D port (



8)

COMPONENT

VIDEO ports (



8)

Y

C

B

/P

B

C

R

/P

R

S-VIDEO port (



8)

VIDEO port (



8)

COMPUTER

port (



8)

CONTROL port

(



8)

Part names

Projector

Intake vent (



6)

Lamp cover (



32)

Strap hole (



3)

Elevator foot

(Bottom of projector)

Elevator foot

Exhaust vent (



6)

5

ENGLISH

Part names

STANDBY/ON button (



12)

prepares for turning the power

on/off.

POWER indicator (



12)

tells the state of power supply.

MENU button (



17)

operates the menu function.

INPUT button (



13)

toggles between the

signal ports.

COMPONENT

VIDEO

S-VIDEO

VIDEO

DVI-D

COMPUTER

POWER

MENU

ENTER

LAMP

TEMP

STANDBY/ON

INPUT

RESET

TEMP indicator (



37)

lights or blinks when any problem about

internal temperature has happened.

LAMP indicator (



37)

light or blinks when any problem about

the lamp has happened.

Cursor buttons (



17)

works for adjusting or menu controlling.

ENTER button (



17)

proceeds to the next operation at the

menu functions.

RESET button (



17)

cancels the adjustment in progress.

* Note that the items whose functions

are performed simultaneously with

operating are nor reset.

Remote control

POWER button (



12)

prepares for turning the

power on/off.

(the same as the

STANDBY/ON button above.)

OPT BLK button (



15)

toggles between the

modes for the optical black.

ASPECT button (



16)

toggles between the modes for

the aspect ratio.

Cursor buttons (



17)

(the same as the above.)

MENU button (



17)

(the same as the above.)

BRIGHT buttons (



16)

controls the brightness of the

whole screen.

DVI button (



13)

selects the DVI-D port input.

PC button (



13)

selects the COMPUTER port input.

COMPO button (



13)

selects the COMPONENT

VIDEO port input.

POWER LIGHT

OPT BLK

ASPECT

MENU

BRIGHT CONTRAST COLOR

IRIS

MODE

MEMORY

ENTER

RESET

DVI PC

AUTO

COMPO

S-VIDEO

VIDEO

LIGHT button (



11)

turn on/off the back light for

the remote control buttons.

MEMORY button (



16)

toggles between your

adjustments.

IRIS button (



14)

toggles between the modes

for the iris.

ENTER button (



17)

(the same as the above.)

RESET button (



17)

(the same as the above.)

CONTRAST buttons (



16)

controls the contrast of the

whole screen.

COLOR buttons (



16)

controls the color of the whole

screen.

AUTO button (



14)

executes automatic

adjustment.

VIDEO button (



13)

selects the VIDEO port input.

S-VIDEO button (



13)

selects the S-VIDEO port input.

MODE button

(



15)

toggles between

the modes for the

picture type.

6

Setting up

Arrangement

WARNING ►Install the projector in a suitable environment according to

instrictions of the "User's Manual - Safety Guide".

CAUTION ►In installation, pay attention enough to ventilation. If internal

temperature rises, it could cause malfunction. Avoid blocking vents. (about the

locations of vents please see



4.)

This projector has some intake vents also on

the bottom. Put nothing that is sucked or sticks to the bottom of projector.

Refer to the illustrations and tables below to determine the screen size and projection

distance.

The values shown in the table are calculated for a full size screen: 1280 x 720

(a) Distance from the projector to the screen (±10%)

(b) The height of the screen (±10%)

At 4:3 screen size

Screen size

(a)

(b)

Projector

Screen

Screen size

[inch (m)]

(a)Projection distance [inch (m)] (b)Screen height

[inch (cm)]

min. max.

30 (0.8) 39 (1.0) 65 (1.6) 18 (46)

40 (1.0) 53 (1.4) 87 (2.2)

24 (61)

50 (1.3) 67 (1.7) 109 (2.8)

30 (76)

60 (1.5) 81 (2.1) 131 (3.3)

36 (91)

70 (1.8) 95 (2.4) 153 (3.9)

42 (107)

80 (2.0) 109 (2.8) 175 (4.5)

48 (122)

90 (2.3) 122 (3.1) 198 (5.0)

54 (137)

100 (2.5) 136 (3.5) 220 (5.6)

60 (152)

120 (3.0) 164 (4.2) 264 (6.7)

72 (183)

150 (3.8) 206 (5.2) 330 (8.4)

90 (229)

200 (5.1) 275 (7.0) 441 (11.2)

120 (305)

250 (6.4) 344 (8.7) 552 (14.0)

150 (381)

300 (7.6) 413 (10.5) 663 (16.8)

180 (457)

At 16:9 screen size

Screen size

(a)

(b)

Projector

Screen

Screen size

[inch (m)]

(a)Projection distance [inch (m)] (b)Screen height

[inch (cm)]

min. max.

30 (0.8) 32 (0.8) 52 (1.3) 15 (37)

40 (1.0) 43 (1.1) 70 (1.8)

20 (50)

50 (1.3) 54 (1.4) 89 (2.3)

24 (62)

60 (1.5) 66 (1.7) 107 (2.7)

30 (75)

70 (1.8) 77 (2.0) 125 (3.2)

34 (87)

80 (2.0) 89 (2.2) 143 (3.6)

39 (100)

90 (2.3) 100 (2.5) 161 (4.1)

44 (112)

100 (2.5) 111 (2.8) 179 (4.6)

49 (125)

120 (3.0) 134 (3.4) 215 (5.5)

59 (149)

150 (3.8) 168 (4.3) 270 (6.9)

74 (187)

200 (5.1) 225 (5.7) 360 (9.2)

98 (249)

250 (6.4) 281 (7.1) 451 (11.5)

122 (311)

300 (7.6) 338 (8.6) 541 (13.8)

147 (374)

7

ENGLISH

Setting up

Using the lens shift dials

CAUTION ►Do not put your ﬁ ngers around the projection lens to prevent

them from being caught by the lens and lens ring.

The Lens of this projector can be shifted horizontally and vertically. When you

want to adjust the picture position, use the lens shift dials.

(a) Using the horizontal picture shift

dial shifts the picture to right or

left.

(b) Using the vertical lens shift dial

shifts the picture upward or

downward.

NOTE • Generally, better quality of a picture is available when the lens shift is set to

the center known by each click point of the dials.

Adjusting the projector's elevator

WARNING ►Do not touch about the lens and ventilation openings during

use or immediately after use to prevent a burn.

CAUTION ►If you press the elevator button without holding the projector,

the projector might crash down, overturn, smash your ﬁ ngers and possibly

result in malfunction. To prevent damaging the projector and injuring yourself,

always hold the projector whenever using the elevator buttons to adjust the

elevator feet.

►Except for inclining by the elevator feet adjustment, place the projector

horizontally.

You can use the elevator feet to make adjustments if the surface on which you

need to set the projector is uneven or if you otherwise need to adjust the angle of

projection. The adjustment range of the elevator feet is 0 to 9 degrees.

1.

Press and hold in the elevator buttons.

2.

Raise or lower the projector to the desired height

and the release the elevator buttons.

When you release the elevator buttons, the elevator

feet will lock into position.

3.

As necessary, you can also ﬁ nely adjust the height

of the projector by twisting the elevator feet by hand.

3/4

1/4

Elevator

feet

Elevator

button

8

Setting up

Connecting your devices

WARNING ►Incorrect connecting could result in ﬁ re or electrical shock.

Whenever attempting to connect other devices to the projector, please

thoroughly read the "User's Manual - Safety Guide", this manual and the

manual of each device to be connected.

CAUTION ►Turn off all devices prior to connecting them to the projector.

Attempting to connect a live device to the projector may generate extremely

loud noises or other abnormalities that may result in malfunction and/or damage

to the device and/or projector.

►Some cables have to be used with core set. A too long cable may cause

a certain picture degradation. Use the accessory cable or a designated-type

cable for the connection. Please consult with your dealer for details. For cables

that have a core only at one end, connect the core to the projector.

►Make sure that you connect devices to the correct port. Incorrect connection

may result in malfunction and/or damage to the device and/or projector.

Refer to the section “TECHNICAL” of this manual for the pin assignment of

connectors and RS-232C communication data.

NOTE • Whenever attempting to connect a laptop computer to the projector, be sure

to activate the laptop’s RGB external image output (set the laptop to CRT display or to

simultaneous LCD and CRT display). For details on how this is done, please refer to the

instruction manual of the corresponding laptop computer.

• Secure the screws on the connectors and tighten.

• Some computers may have multiple display screen modes. Use of some of these

modes will not be possible with this projector.

• For some COMPUTER input modes, the optional Mac adapter is necessary.

• When the image resolution is changed on a computer, depending on an input,

automatic adjust function may take some time and may not be completed. In this case,

you may not be able to see a check box to select “Yes/No” for the new resolution on

Windows. Then the resolution will go back to the original. It might be recommended to

use other CRT or TFT monitors to change the resolution.

About Plug-and-Play capability

Plug-and-Play is a system composed of the computer, its operating system and

peripheral equipment (i.e. display devices). This projector is compatible with VESA DDC

2B. Plug-and-Play can be achieved by connecting this projector to computers that are

VESA DDC (display data channel) compatible.

• Please take advantage of this function by connecting the accessory RGB cable to

the COMPUTER port (DDC 2B compatible) and/or the optional DVI cable to the DVI-D

port (DDC 2B compatible). Plug-and-Play may not work properly if any other type of

connection is attempted.

• Please use the standard drivers in your computer as this projector is a Plug-and-Play

monitor.

9

ENGLISH

Setting up

DVI-D

Y

C

B

/P

B

C

R

/P

R

COMPONENT VIDEO

S-VIDEO

VIDEO

COMPUTER CONTROL

DVI-D

Y

C

B

/P

B

C

R

/P

R

COMPONENT VIDEO

S-VIDEO

VIDEO

COMPUTER CONTROL

DVI-D

Y

C

B

/P

B

C

R

/P

R

COMPONENT VIDEO

S-VIDEO

VIDEO

COMPUTER CONTROL

DVI-D

Y

C

B

/P

B

C

R

/P

R

COMPONENT VIDEO

S-VIDEO

VIDEO

COMPUTER CONTROL

DVI-D

Y

C

B

/P

B

C

R

/P

R

COMPONENT VIDEO

S-VIDEO

VIDEO

COMPUTER CONTROL

RS-232C DVI out

DVI cable

RS-232C cable

RGB cable

RS-232C cable

S-video cable

VIideo cable

Video cable

RS-232C RGB out

Video out S-video out

Component cable

Component video out

SCART RGB out

SCART cable

SCART adapter

10

Settin up

Connecting power supply

WARNING ►Please use extra caution when connecting the power cord as

incorrect or faulty connections may result in ﬁ re and/or electrical shock.

• Only use the power cord that came with the projector. If it is damaged, contact

your dealer to newly get correct one.

• Only plug the power cord into an outlet rated for use with the power cord's

speciﬁ ed voltage range.

• Never modify the power cord. Never attempt to defeat the ground connection

of the three-pronged plug.

1.

Connect the connector of the power cord to the

AC inlet of the projector.

2.

Firmly plug the power cord's plug into the outlet.

R

emote control

Putting batteries

WARNING ►Always handle the batteries with care and use them only as

directed. Improper use may result in battery explosion, cracking or leakage,

which could result in ﬁ re, injury and/or pollution of the surrounding environment.

• Be sure to use only the batteries speciﬁ ed. Do not use batteries of different

types at the same time. Do not mix a new battery with used one.

• Make sure the plus and minus terminals are correctly aligned when loading a

battery.

• Keep a battery away from children and pets.

• Do not recharge, short circuit, solder or disassemble a battery.

• Do not allow a battery in a ﬁ re or water. Keep batteries in a dark, cool and dry

place.

• If you observe a leakage of a battery, wipe out the ﬂ ower and then replace

a battery. If the ﬂ ower adheres your body or clothes, rinse well with water

immediately.

1.

Remove the battery cover.

Slide back and remove the battery cover in the

direction of the arrow.

2.

I

nsert the batteries.

Align and insert the two AAA batteries according

to their plus and minus terminals as indicated in the

remote control.

3.

Close the battery cover.

Replace the battery cover in the direction of the

arrow and snap it back into place.

AC

inlet

Power

outlet

11

ENGLISH

Remote control

Using the LIGHT button

To illuminate the buttons of the remote control, press the

LIGHT button of it.

1.

Press the

LIGHT

LIGHT button.

If you don’t push the LIGHT button again, the lights will

turn off in several seconds.

Using the remote control

CAUTION ►Be careful in handling the remote control.

• Do not drop or otherwise expose the remote control to physical impact.

• Do not get the remote control wet or place it on wet objects. Doing so may

result in malfunction.

• Remove the batteries from the remote control and store them in a safe place if

you won’t be using the remote control for an extended period.

• Replace the batteries whenever the remote control starts to malfunction.

• When strong lights, such as direct sunlight or light from an extremely close

range (such as from an inverter ﬂ uorescent lamp), hit the projector’s remote

sensor, the remote control may cause to function. Adjust the direction of the

projector to keep light from directly hitting the projector’s remote sensor.

The remote control works with the projector’s remote sensor.

• The range of the remote sensor is 3 meters with

a 60- degree range (30 degrees to the left and

right of the remote sensor).

• Also a remote signal reﬂ ected in the screen etc.

may be available. If it is difﬁ cult to send a remote

signal to the sensor directly, please try.

• Since the remote control uses infrared light

to send signals to the projector (Class1 LED),

be sure to use the remote control in an area

free from obstacles that could block the remote

control’s output signal to the projector.

LIGHT

button

approximately

3 meters

30º

POWER LIGHT

OPT BLK

ASPECT

MENU

BRIGHT CONTRAST COLOR

IRIS

MODE

MEMORY

ENTER

RESET

DVI PC

AUTO

12

Power on/off

WARNING

►

When the power is on, a strong light is emitted. Do not look

into the lens or vents of the projector.

NOTE • Turn the power on/off in right order. Please power on the projector

before the connected devices. Power off the projector after the connected devices.

Power

switch

STANDBY/ON

button

POWER

indicator

POWER

LAMP

TEMP

STANDBY/ON

POWER

(Solid orange)

Turning on the power

1.

Make sure that the power cord is ﬁ rmly and correctly connected to the

projector and outlet.

2.

Remove the lens cover, and set the power switch to

the ON position.

The power indicator will light to solid orange. Then wait

several seconds because buttons may not function for

these several seconds.

3.

Press the button STANDBY/ON (projector) or POWER

(remote control).

The projector lamp will light up and the POWER

indicator will begin blinking green.

When the power is completely on, the indicator will stop blinking light green.

To display the picture, select an input signal according to the section "Selecting an

input signal" (



13

). Then select the aspect ratio (



13

), adjust the picture position

(



7

), and adjust the zoom and focus (



14

).

Turning off the power

1.

Press the button STANDBY/ON (projector) or POWER (remote control).

The message "Power off?" will appear on the

screen for approximately 5 seconds.

2.

Press the button STANDBY/ON (projector) or

POWER (remote control) again while the message

is visible.

The projector lamp will go off, and the POWER

indicator will begin blinking orange. Then the POWER

indicator will stop blinking and light to solid orange

when the lamp cooling is complete.

3.

Set the power switch to the OFF position. The

POWER indicator will go off.

Power off?

POWER

(Blinking green)

POWER

(Solid green)

POWER

(Blinking orange)

POWER

(Solid orange)

POWER

button

POWER LIGHT

OPT BLK

ASPECT

MENU

BRIGHT CONTRAST COLOR

IRIS

MODE

MEMORY

ENTER

RESET

DVI PC

AUTO

COMPO

S-VIDEO

VIDEO

13

ENGLISH

Operating

Selecting an input signal

1.

Using the projector's button, press the INPUT

button.

Each time you press the INPUT button, the projector

switches between its input ports. Select the signal

you wish to project.

COMPONENT VIDEO



S-VIDEO



VIDEO



DVI-D



COMPUTER

MENU

ENTER

INPUT

RESET

1.

Using the remote control's button, press the button

DVI, PC, COMPO, S-VIDEO or VIDEO according to

the input port to choose.



DVI button



DVI-D



PC button



COMPUTER



COMPO button



COMPONENT VIDEO



S-VIDEO button



S-VIDEO



VIDEO button



VIDEO

4:3

16:9

MOVIE1

MOVIE2

WIDE

16:9

MOVIE1

4:3

WIDE

MOVIE2

POWER LIGHT

OPT BLK

ASPECT

MENU

BRIGHT CONTRAST COLOR

IRIS

MODE

MEMORY

ENTER

RESET

DVI PC

AUTO

COMPO

S-VIDEO

VIDEO

DVI PC

AUTO

COMPO

S-VIDEO

VIDEO

Selecting an aspect ratio

1.

Press the ASPECT button (remote control) to toggle between the modes for

aspect ratio.

The NORMAL mode keeps the original aspect ratio of the signal. At a HDTV

signal of 1125i or 750p, only the 16:9 mode can be selected.



At a DVI-D port's input

4:3



16:9



WIDE



MOVIE1



MOVIE2



NORMAL



At a computer signal (not DVI-D port's input)

4:3



16:9



NORMAL



At a video signal

4:3



16:9



WIDE



MOVIE1



MOVIE2



At no signal

4:3



16:9

At a signal

for 4:3

At a signal

for 16:9

POWER LIGHT

OPT BLK

ASPECT

MENU

BRIGHT CONTRAST COLOR

IRIS

MODE

MEMORY

ENTER

RESET

DVI PC

AUTO

COMPO

S-VIDEO

VIDEO

OPT BLK

ASPECT

IRIS

MODE

MEMORY

14

Operating

Adjusting the zoom and focus

1.

Use the zoom knob to adjust the screen size.

2.

Use the focus knob to focus the picture.

Zoom knob

Focus knob

Using the automatic adjustment feature

1.

Press the AUTO button (remote control).

The automatic adjustment operation requires approximately 10 seconds. Also

please note that it may not function correctly with some input.



At a computer signal

The vertical position, the horizontal position,

the clock phase and horizontal size will be

automatically adjusted.

Make sure that the application window is set to

its maximum size prior to attempting to use this

feature. A dark picture may still be incorrectly

adjusted. Use a bright picture when adjusting.



At a video signal

The video format best suited for the respective input signal will be selected

automatically.

This function is available only when the AUTO mode is selected to the item

VIDEO FORMAT of the INPUT menu

(



24)

. For a component video signal,

the signal type is identiﬁ ed automatically independently of this function.

Improving the contrast ratio

1.

Press the IRIS button (remote control).

A dialog will appear on the screen to aid you in

adjusting the iris.

2.

Use the cursor buttons ▲/▼ (remote control/

projector) to adjust the iris.

3.

Press the IRIS button again to close the dialog and

complete this operation.

Even if you don't do anything, the dialog will

automatically disappear after about 5 seconds.

POWER LIGHT

OPT BLK

ASPECT

MENU

BRIGHT CONTRAST COLOR

IRIS

MODE

MEMORY

ENTER

RESET

DVI PC

AUTO

COMPO

S-VIDEO

VIDEO

DVI PC

AUTO

CO O

SO

O

POWER LIGHT

OPT BLK

ASPECT

MENU

BRIGHT CONTRAST COLOR

IRIS

MODE

MEMORY

ENTER

RESET

DVI PC

AUTO

COMPO

S-VIDEO

VIDEO

OPT BLK

ASPECT

IRIS

MODE

MEMORY

15

ENGLISH

Operating

Selecting a mode of picture type

1.

Press the MODE button (remote control) to toggle

between the modes for picture type.

These arrangements are combinations of a mode of

GAMMA

(



19)

and a mode of COLOR TEMP

(



19)

.

Choose a suitable mode according to the projected

source.

NORMAL



CINEMA



MUSIC



SPORTS



DYNAMIC

MODE

COLOR

TEMP

GAMMA Description

NORMAL 7500K #1 DEFAULT Standard image quality, it can be enjoyed with

various sources.

CINEMA 8000K #2 DEFAULT Film tone image that is best for cinema picture.

MUSIC 8500K #3 DEFAULT The image pursuits DVD source image that is best

for music video clip, and the DVD image other

than cinema.

SPORTS 9300K #4 DEFAULT The image that emphasis on higher contrast that is

best for HDTV and sports program.

DYNAMIC DYNAMIC #1 DEFAULT This is the brightest mode of all.

Adjusting a black image

1.

Press the OPT BLK button (remote control) to

toggle between the modes of OPTICAL BLACK

(



18)

.

These arrangements are combinations of a mode of

IRIS

(



26)

and a mode of WHISPER

(



26)

.

OFF



NATURAL



DEEP BLACK

OPTICAL BLACK IRIS WHISPER

OFF 10 NORMAL

NATURAL 4 WHISPER

DEEP BLACK 0 WHISPER

POWER LIGHT

OPT BLK

ASPECT

MENU

BRIGHT CONTRAST COLOR

IRIS

MODE

MEMORY

ENTER

RESET

DVI PC

AUTO

COMPO

S-VIDEO

VIDEO

POWER LIGHT

OPT BLK

MODE

MEMORY

POWER LIGHT

OPT BLK

ASPECT

MENU

BRIGHT CONTRAST COLOR

IRIS

MODE

MEMORY

ENTER

RESET

DVI PC

AUTO

COMPO

S-VIDEO

VIDEO

POWER LIGHT

OPT BLK

MODE

MEMORY

16

Operating

Recalling your adjustment

This projector can memorize 4 settings by the MY

MEMORY function of the PICTURE menu

(



20)

.

Pressing the MEMORY button (remote control) calls the

settings and adjusts the current picture.

The memory which is not registered is skipped. When

there is no memory registered, the picture isn't adjusted.

1.

Press the MEMORY button.

Each time you press the MEMORY button, one of

memorized settings comes in the order below.

LOAD1



LOAD2



LOAD3



LOAD4

Adjusting the picture (brightness, contrast, color)

Brightness and contrast can be adjusted using each (+)

and (-) button (remote control). At a video signal, the

color can also be adjusted.

1.

Press the (+) or (-) button under the item indication

to adjust. Use the (+) button to increase the item, or

use the (-) button to decrease the item.

A dialog will appear on the screen to aid you in

adjusting the item to adjust. You can inactivate the

display using the item "MESSAGE" of the SCREEN

menu

(



27)

.

2.

If you don't do anything, the dialog will automatically

disappear after about 5 seconds.

POWER LIGHT

OPT BLK

ASPECT

MENU

BRIGHT CONTRAST COLOR

IRIS

MODE

MEMORY

ENTER

RESET

DVI PC

AUTO

COMPO

S-VIDEO

VIDEO

MENU

BRIGHT CONTRAST COLOR

RESET

POWER LIGHT

OPT BLK

ASPECT

MENU

BRIGHT CONTRAST COLOR

IRIS

MODE

MEMORY

ENTER

RESET

DVI PC

AUTO

COMPO

S-VIDEO

VIDEO

POWER LIGHT

OPT BLK

MODE

MEMORY

17

ENGLISH

Multifunctional settings

Using the menu function

This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP,

SCREEN, OPTION and EASY MENU. Each of these menus is operated using the

same methods. The basic operations of these menus are as follows.

1.

Press the MENU button (remote control/projector).

The advanced MENU or EASY MENU will appear. Which

menu is displayed is dependent on the last use.

2.

Use the cursor buttons ▲/▼ (remote control/projector) to

select a menu.



At the EASY MENU, if you want it to change to the

advanced MENU, select the "Go to Advanced Menu".



At the advanced MENU, select a menu of PICTURE,

IMAGE, INPUT, SETUP, SCREEN or OPTION.

If you want it to change to the EASY MENU, select the

EASY MENU.

3.

Then press the cursor button ► or the ENTER button

(remote control/projector) to progress. The display of the

selected menu will active.

4.

Use the cursor buttons ▲/▼ to select an item to operate.

Then press the cursor button ► or the ENTER button to

progress. The operation display of the selected item will

appear.

5.

Use the cursor buttons▲/▼ to operate the item.

When you want to reset the operation, press the RESET button (remote

control/projector) during the operation. Note that items whose functions are

performed simultaneously with operation (ex. LANGUAGE, H PHASE etc.)

aren't reset.

When you want to return to the previous display, press the cursor button ◄.

6.

Press the MENU button again to close the menu and complete this operation.

Even if you don't do anything, the dialog will automatically disappear after

about 50 seconds.

MENU

[

RGB

]

:SELECT

PICTURE

IMAGE

INPUT

SETUP

SCREEN

OPTION

EASY MENU

BRIGHT

CONTRAST

GAMMA

COLOR TEMP

COLOR

TINT

SHARPNESS

PROGRESSIVE

MY MEMORY

+0

DEFAULT 1

6500K

+0

TURN OFF

SAVE 1

MENU

EASY MENU

ASPECT

KEYSTONE

MODE

OPTICAL BLACK

BRIGHT

CONTRAST

COLOR

TINT

SHRPNESS

WHISPER

MIRROR

RESET

FILTER TIME

LANGUAGE

4:3

+0

NORMAL

OFF

+0

+3

NORMAL

0

ENGLISH

Go To Advance Menu...

EASY MENU

POWER LIGHT

OPT BLK

ASPECT

MENU

BRIGHT CONTRAST COLOR

IRIS

MODE

MEMORY

ENTER

RESET

DVI PC

AUTO

COMPO

S-VIDEO

VIDEO

RESET button

ENTER button

MENU button

Cursor buttons

MENU

ENTER

INPUT

RESET

ASPECT

MENU

BRIGHT CONTRAST COLOR

IRIS

ENTER

RESET

18

Multifunctional settings

EASY Menu

Item Description

ASPECT

Select the ASPECT menu to toggle the mode of image aspect ratio.

Refer to description of “ASPECT” in the “IMAGE” menu. (



22)

KEYSTONE

Perform the KEYSTONE adjustment using ◄/► buttons.:

Refer to description of “KEYSTONE” in the “SETUP” menu. (



26)

MODE

Select a picture mode using ◄/► button.

NORMAL



CINEMA



MUSIC



SPORTS



DYNAMIC

OPTICAL BLACK

Select a Optical Black mode using ◄/► button.

OFF



NATURAL



DEEP BLACK

BRIGHT Refer to description of “BRIGHT” in the “PICTURE” menu. (



19)

CONTRAST

Refer to description of “CONTRAST” in the “PICTURE” menu.

(



19)

COLOR Refer to description of “COLOR” in the “PICTURE” menu. (



19)

TINT Refer to description of “TINT” in the “PICTURE” menu. (



19)

SHRPNESS

Refer to description of “SHARPNESS” in the “PICTURE” menu.

(



20)

WHISPER Refer to description of “WHISPER” in the “SETUP” menu. (



26)

MIRROR Refer to description of “MIRROR” in the “SETUP” menu. (



26)

RESET

EASY MENU reset window will appear. Select “RESET” using

“▲” button to reset the all of the items in the “EASY Menu” to the

default, except “FILTER TIME” and “LANGUAGE”.

FILTER TIME

FILTER TIME reset window will appear. Refer to the “FILTER TIME”

in the “OPTION” menu. (



29)

LANGUAGE

Select the LANGUAGE to toggle the menu language. Refer to

description of “LANGUAGE” in the “SCREEN” menu. (



27)

Go To

Advanced Menu

Select the “Go To Advanced Menu” to use the PICTURE, the

IMAGE, the INPUT, the SETUP, the SCREEN and the OPTION

menus.

With the EASY menu, items shown in the table below can be

performed. Perform each operation in accordance with the

instructions in the table below.

Select an item using the ▲/▼ buttons, and press the ◄/►

button to perform each function. :

EASY MENU

ASPECT

KEYSTONE

MODE

OPTICAL BLACK

BRIGHT

CONTRAST

COLOR

TINT

SHRPNESS

WHISPER

MIRROR

RESET

FILTER TIME

LANGUAGE

4:3

+0

NORMAL

OFF

+0

+3

NORMAL

0

ENGLISH

Go To Advance Menu...

Page is loading ...

Hitachi PJ-TX100E User manual

This manual is also suitable for

Hitachi PJ-TX100E User manual

Related papers

Other documents