Pelco VideoXpert Professional Flex 2 Server Rack Kit Installation guide

Hello! I am an AI chatbot trained to assist you with the Pelco VideoXpert Professional Flex 2 Server Rack Kit Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

VideoXpert Professional Flex 2 Server

Rack Kit Installation Note

To convert the VideoXpert Professional Flex 2 Server from tower to rack mode, obtain and follow the

instructions in the Dell PowerEdge T330 Owner's Manual, in the section titled Converting the system from

tower mode to rack mode, with the following exceptions:

l Do not install the VGA module.

l Install only the right rack ear, not the left.

C6634M-A | 07/19 1

VideoXpert Professional Flex 2 Server Rack Kit Installation Note

International Standards Organization

Registered Firm; ISO9001 Quality System

Pelco, Inc.

625 W. Alluvial, Fresno, California 93711 United States

(800) 289-9100 Tel

(800) 289-9150 Fax

+1 (559) 292-1981 International Tel

+1 (559) 348-1120 International Fax

www.pelco.com

Pelco, the Pelco logo, and other trademarks associated with Pelco products referred to in this publication are trademarks of Pelco, Inc.

or its affiliates. ONVIF and the ONVIF logo are trademarks of ONVIF Inc. All other product names and services are the property of their

respective companies. Product specifications and availability are subject to change without notice.