Pelco VideoXpert Professional Flex 2 Server Rack Kit Installation guide
- Category
- Rack accessories
- Type
- Installation guide
VideoXpert Professional Flex 2 Server
Rack Kit Installation Note
To convert the VideoXpert Professional Flex 2 Server from tower to rack mode, obtain and follow the
instructions in the Dell PowerEdge T330 Owner's Manual, in the section titled Converting the system from
tower mode to rack mode, with the following exceptions:
l Do not install the VGA module.
l Install only the right rack ear, not the left.
C6634M-A | 07/19 1
VideoXpert Professional Flex 2 Server Rack Kit Installation Note
International Standards Organization
Registered Firm; ISO9001 Quality System
Pelco, Inc.
625 W. Alluvial, Fresno, California 93711 United States
(800) 289-9100 Tel
(800) 289-9150 Fax
+1 (559) 292-1981 International Tel
+1 (559) 348-1120 International Fax
www.pelco.com
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred to in this publication are trademarks of Pelco, Inc.
or its affiliates. ONVIF and the ONVIF logo are trademarks of ONVIF Inc. All other product names and services are the property of their
respective companies. Product specifications and availability are subject to change without notice.
© Copyright 2019, Pelco, Inc. All rights reserved.
-
1
-
2
Pelco VideoXpert Professional Flex 2 Server Rack Kit Installation guide
- Category
- Rack accessories
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI