Axema Facia C84 User manual

  • Hello! I am an AI chatbot trained to assist you with the Axema Facia C84 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Axema Access Control AB | Box 90215 | 120 23 Stockholm, Sweden | 08-722 34 40 | info@axema.se | www.axema.se
Facia C84, C88, C86, C87 and C89
Facias are used for flush mounting Axema's readers A66, A63, A61 and A04.
Manual
Updated 2018-10-25
Facia
Facia C84 and C88 fits the flush mount box C83 and BB3
Facia C86 and C87 fits the flush mount boc C85 and BB5
Facia C89 fits the flush mount box TPIM
Facia C84, C88, C86, C87 and C89 1
If A04 or A05 is used. 3
Mounting 4
2 (5)
Manual Facia
If A04 or A05 is used.
1. Supply power the code lock
2. Mount the spacer with the "wing" towards the code lock..
3. The code lock will automatically enter the programming mode.
4. Press A20, enter the desired six digit programming code twice followed by
B.
5. Remove the power, mount the code lock with facia and supply power to the
code lock again.
3 (5)
Manual Facia
Mounting
1. If an existing flush mount box is not available, mount a new box in the wall.
2. Mount the spacer with the "wing" towards the code lock. and the support
plate on the reader insert (the reader without frame and backing. Screw the
insert to the facia using the thumb screws tight enough to hold them in
place, but not harder.
3. Connect the cable to the terminals on the reader.
4. Mount the unit in the flush mount box.
5. Place the rubber strip between the facia and the box.
6. Screw the facia tight using the supplied Secutorx screws.
4 (5)
Manual Facia
1/5