Spin Master AQUADOODLE User manual

  • Hello! I am an AI chatbot trained to assist you with the Spin Master AQUADOODLE User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Add water to pen.
1. Unscrew tip of pen counterclockwise.
2. Add water to pen. To avoid leakage, do not overfill.
3. Screw pen tip back on clockwise.
4. Using the water pen, draw and doodle on the mat. For best results,
make sure the lines are clear and solid.
Care of play mat and pen
To avoid mold and/or damage to
product performance, allow mat to
completely dry after use.
Store mat and pen in a dry area.
If cleaning is required, remove the
water pen or any accessories before
washing. Hand wash and line dry
only.
• Store water pen in elastic retainer
located on edge of mat.
1
2
Pen
Tip
Add
Water
3
4
Pen
Tip
• Once play mat is
completely dry it
may be rolled up
for storage.
• Use the attached
storage ties to
secure the rolled
play mat.
Roll n’Go
Ribbon
INSTRUCTION GUIDE
PREPARATION AND PLAY INSTRUCTIONS
BEFORE YOU PLAY
Contents:
• 1 Large Doodle Mat
70 cm x 70 cm
(27.63 in x 27.63 in)
1 Aquadoodle™ Pen
1 Instruction Guide
Pen Storage
Roll n’Go
Ribbon
Aquadoodle™
Pen
Doodle Mat
With a dry cloth, wipe the mat of any dust
or dirt.
NOTE: For best results, avoid play areas
with high humidity and ensure mat surface
is not overly moist. Since the technology is
moisture-sensitive, these factors can affect
performance.
Place the mat
on a flat surface.
Spin Master Ltd., 450 Front Street West,
Toronto, ON M5V 1B6 Canada
Spin Master Inc., PMB #10053, 300 International Drive,
Suite 100, Williamsville, NY 14221, USA
Customer Care: 1-800-622-8339
www.spinmaster.com www.aquadoodle.com
TM & © Spin Master Ltd. All rights reserved. The item inside this package may vary
from the photographs and/or illustrations. Keep addresses and phone numbers for
future reference. Please remove all packaging material before giving to children.
This product conforms to safety requirements ASTM D-4236. MADE IN CHINA.
20058119 NEN REV 0
T70678_0038_20058119_NEN_IS_R1
/