2. aspenhome
  3. I287-371

aspenhome I287-371 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the aspenhome desk, model I287-371. This document details how to put together your new desk, including how to adjust the shelf, use the flip-down keyboard tray with an AC power pack, and the locking file drawers for letter or legal files. I'm ready to assist you with any questions you might have about these instructions or the desk.
  • What tool is required for assembly?
    What size files can the locking drawers hold?
    What should I do with the keys for the file lock?
    What is inside the keyboard tray?
    How do you disassemble the desk?
Page 1/2
ITEM NO: I287-371 Open Ped Desk
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference.
FOR INDOOR USE ONLY
FUNCTIONALITY INSTRUCTION
Press here to release
Hook latch
Metal plate
HARDWARE LIST:
No.
ADescription Sketch Quantity
Allen Wrench 1 PC
Flip down keyboard tray with
2 AC outlet Power Pack
Locking file drawers hold
letter or legal size files
Remove the wood screws on the
side of drawer box to remove the
rod loops and file rods if necessary.
Keys for file lock.
Do not trash.
08-05-2020
Page 2/2
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
To dis-assemble desk (If necessary):
Notes: To reassemble desk, replace bolts removed in STEP 2 above before proceeding
to STEP 3 below. Tighten all of the bolts completely.
STEP 2: Remove bolts, lock washers and flat washers from the metal base assemblies.
Adjust the leveler
when necessary
Leveler on legs
STEP 1: Put the case upside down on a soft surface.
STEP 3: Turn the assembled desk to the upright position.
ITEM NO: I287-371 Open Ped Desk
Desk Back
If you prefer to adjust the shelf
location, remove the screws and
move shelf brackets to the
desired location. Then secure the
brackets to shelf with screws.
Metal Base Assembly
08-05-2020
/