Gigabyte GV-N980X3WA-4GD Owner's manual

Type
Owner's manual

This manual is also suitable for

Gigabyte GV-N980X3WA-4GD: Experience exceptional graphics performance and immersive gaming with our top-of-the-line graphics card. Equipped with three powerful NVIDIA GeForce GTX 980 GPUs, this graphics card delivers ultra-smooth gameplay and stunning visuals in even the most demanding games. Its innovative water cooling system ensures optimal performance and stability, while the included accessories like SLI bridge and VGA jack provide a seamless setup. Unleash the ultimate gaming experience with Gigabyte GV-N980X3WA-4GD.

Gigabyte GV-N980X3WA-4GD: Experience exceptional graphics performance and immersive gaming with our top-of-the-line graphics card. Equipped with three powerful NVIDIA GeForce GTX 980 GPUs, this graphics card delivers ultra-smooth gameplay and stunning visuals in even the most demanding games. Its innovative water cooling system ensures optimal performance and stability, while the included accessories like SLI bridge and VGA jack provide a seamless setup. Unleash the ultimate gaming experience with Gigabyte GV-N980X3WA-4GD.

THE CONTENT OF TRUNK
A
A
E
B
C
D
F
WATERCOOLING BOX GRAPHIC CARDS + RADIATOR 1
GRAPHIC CARDS + RADIATOR 2
GRAPHIC CARDS + RADIATOR 3 CD-ROM BOX
VGA JACK
PIPE CLAMPS (total 6 pcs) 3-WAY SLI BRIDGE
STRAPS(total 2 pcs)
Installation Guide
Scan the QR code or visit http://www.gigabyte.com/MicroSite/374/index.html
to watch the installation video
12WE6-N980X3-00IR
1
1
2
2
3
3
B
C
D
E
F
The trunk is covered with the tearable plastic wrap.
Power supply module
Step 1
Open the trunk and take out WATERCOOLING BOX.
Place the box on the computer chassis, and use the pins
for stabilizing.
Open the top cover and front cover of WATERCOOLING BOX.
Remove the first drive bay cover from the computer chassis.
Step 2
A A
Connect the USB to the motherboard. And connect the power connector to the power supply module.
Step 3
Motherboard
Plug GRAPHICS CARD 1 into the
PCI-E slot on the motherboard and
pull out the RADIATOR 1 from the
chassis through the first drive bay.
Use PIPE CLAMPS to fix
the pipes Follow Step to to install
GRAPHICS CARD 2 and
GRAPHICS CARD 3 accordingly.
Step 4
B
4-24-1
4-1 4-2
4-3
Place RADIATOR 3 into WATERCOOLING BOX. Embed the pipes into the pipe slot.
Follow Step to to install RADIATOR 2 and RADIATOR 1 accordingly.
And embed the pipe 2 and pipe 1 into the pipe slot.
Step 5
A
5-1 5-2
5-1 5-2
5-3
push
push
1
1
1
12
3
1
2
3
1
1
2
2
3
3
3
321
Connect each VGA cards with
two 8-pin power cables.
Close the top cover and front cover of WATERCOOLING BOX.
Tips: Please note the power cables and water pipes need to be
well-stored as shown in picture.
Insert the CD-ROM BOX inside the drive bay.
Tips: If the CD-ROM BOX cannot be well-fixed to the chassis,
users may extend the arm of the CD-ROM BOX to strengthen
to structure.
Use VGA JACK to safely support the cards. Connect 3 VGA cards together
by using the 3-WAY SLI BRIDGE. Close the chassis, turn on the power, and
install OC GURU II and Graphics card driver to get started.
Step 8
C
DE
A
Step 6 Step 7
Power cables
Water pipes
Recommended area for VGA JACK
are
a f
or
VGA
JA
CK
Rec
omm
end
ed
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Gigabyte GV-N980X3WA-4GD Owner's manual

Type
Owner's manual
This manual is also suitable for

Gigabyte GV-N980X3WA-4GD: Experience exceptional graphics performance and immersive gaming with our top-of-the-line graphics card. Equipped with three powerful NVIDIA GeForce GTX 980 GPUs, this graphics card delivers ultra-smooth gameplay and stunning visuals in even the most demanding games. Its innovative water cooling system ensures optimal performance and stability, while the included accessories like SLI bridge and VGA jack provide a seamless setup. Unleash the ultimate gaming experience with Gigabyte GV-N980X3WA-4GD.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI