Grizzly G0845P
Grizzly G0845P is a heavy-duty 50" electric metal shear machine that can cut mild steel up to 10 gauge and aluminum up to 8 gauge. It features a remote on/off foot pedal control, reversible hardened steel alloy cutting shear dies for extended life, adjustable front and rear stop scales, hand and foot-pedal operation, super-quiet operation, built-in non-marring hold-down clamp, and a shadow light.
With a maximum cutting width of 50 inches, the Grizzly G0845P is ideal for cutting large sheets of metal.
Grizzly G0845P
Grizzly G0845P is a heavy-duty 50" electric metal shear machine that can cut mild steel up to 10 gauge and aluminum up to 8 gauge. It features a remote on/off foot pedal control, reversible hardened steel alloy cutting shear dies for extended life, adjustable front and rear stop scales, hand and foot-pedal operation, super-quiet operation, built-in non-marring hold-down clamp, and a shadow light.
With a maximum cutting width of 50 inches, the Grizzly G0845P is ideal for cutting large sheets of metal.
The information contained herein is deemed accurate as of 3/30/2023 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 2
Model G0845P
MACHINE DATA
SHEET
Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901
MODEL G0845P HEAVY‐DUTY 50" ELECTRIC METAL
SHEAR ‐ POLAR BEAR SERIES
Product Dimensions:
Weight............................................................................................................................................................ 3197 lbs.
Width (side-to-side) x Depth (front-to-back) x Height..................................................................... 72-1/2 x 80 x 48 in.
Footprint (Length x Width)............................................................................................................... 28-1/2 x 66-1/2 in.
Space Required for Full Range of Movement (Width x Depth).................................................................... 96 x 80 in.
Shipping Dimensions:
Type.......................................................................................................................................................... Wood Crate
Content........................................................................................................................................................... Machine
Weight............................................................................................................................................................ 3748 lbs.
Length x Width x Height....................................................................................................................... 79 x 45 x 63 in.
Must Ship Upright................................................................................................................................................... Yes
Electrical:
Power Requirement................................................................................................................... 220V, 3-Phase, 60 Hz
Full-Load Current Rating..................................................................................................................................... 20.7A
Minimum Circuit Size..............................................................................................................................................30A
Connection Type............................................................................................................................................ Hardwire
Switch Type...................................................................... Foot-Operated ON/OFF Switch w/External Safety Padlock
Motors:
Main
Horsepower............................................................................................................................................. 7.5 HP
Phase.................................................................................................................................................... 3-Phase
Amps......................................................................................................................................................... 20.7A
Speed................................................................................................................................................ 1720 RPM
Type........................................................................................................................... TEFC w/Integrated Brake
Power Transfer ............................................................................................................................... V-Belt Drive
Bearings........................................................................................................ Sealed & Permanently Lubricated
Centrifugal Switch/Contacts Type................................................................................................................ N/A
Main Specifications:
Capacities
Maximum Width......................................................................................................................................... 50 in.
Maximum Thickness Mild Steel.......................................................................................................... 10 Gauge
Maximum Thickness at Full Width Mild Steel..................................................................................... 10 Gauge
Aluminum.............................................................................................................................................. 8 Gauge
Maximum Beam Lift.................................................................................................................. 1/2 – 1-13/16 in.
Bed Height Above Floor...................................................................................................................... 31-1/2 in.
Working Height.................................................................................................................................... 31-1/2 in.
Front Stop Scale Range.................................................................................................... 3-15/16 – 39-5/16 in.
Rear Stop Scale Range................................................................................................................. 0 – 25-5/8 in.
The information contained herein is deemed accurate as of 3/30/2023 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 2 OF 2
Model G0845P
Construction
Frame......................................................................................................................................................... Steel
Shear Table................................................................................................................................................ Steel
Shear Hold-Down Clamp............................................................................................................................Steel
Shear Blades.............................................................................................................................................. Steel
Shear Blade Type...................................................................................................................... Hardened Alloy
Other Specifications:
Country of Origin ................................................................................................................................................ China
Warranty ........................................................................................................................................................... 1 Year
Approximate Assembly & Setup Time .............................................................................................................2 Hours
Serial Number Location ................................................................................................................... Machine ID Label
Certified by a Nationally Recognized Testing Laboratory (NRTL) .......................................................................... No
Features:
Remote On/Off Foot Pedal Control
Reversible, Hardened Steel Alloy Cutting Shear Dies for Extended Life
Adjustable Front and Rear Stop Scales
Hand and Foot-Pedal Operation
Super-Quiet Operation
Built-In, Non-Marring Hold-Down Clamp
Shadow Light
-
1
-
2
Grizzly G0845P
Grizzly G0845P is a heavy-duty 50" electric metal shear machine that can cut mild steel up to 10 gauge and aluminum up to 8 gauge. It features a remote on/off foot pedal control, reversible hardened steel alloy cutting shear dies for extended life, adjustable front and rear stop scales, hand and foot-pedal operation, super-quiet operation, built-in non-marring hold-down clamp, and a shadow light.
With a maximum cutting width of 50 inches, the Grizzly G0845P is ideal for cutting large sheets of metal.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
