2. WarmlyYours
  3. SCV-120 Value Snow Melt Switch/Sensor

WarmlyYours SCV-120 Value Snow Melt Switch/Sensor Product information

  • I have reviewed the installation manual for the WarmlyYours Snow Switch LCD-7A. This document details the installation procedures, wiring instructions, and key features of the snow switch, including its moisture sensing grid and ambient air temperature sensor. I am ready to assist with any questions you have about this device.
  • What voltage does the snow switch operate on?
    What is the maximum load the snow switch can handle?
    What kind of conduit should be used?
INSTALLATION MANUAL
MODEL LCD®-7A Snow Switch
Part Number 21035
Installation Support • No Nonsense™ Warranty •(800) 875-5285 • www.WarmlyYours.com
Conduit body (or weatherproof box)
and rigid conduit supplied by user.
Make all threaded joints weathertight.
Ambient air temperature sensor.
Cool This Area Per Instructions When Testing
Insulate splices with wire nuts.
Grade or mounting
support surface.
1/2" NPT Galvanized Nipple.
Customer Supplied
Mount rigidly in upright postition
as shown above ground as
necessary to discourage animal
damage and vandalism.
0.75"
(19.1 mm)
Moisture sensing grid.
Windshield with
water drain slots.
2.00"
(50.8 mm)
2.25"
(57.2 mm)
2.65"
(67.3 mm)
3.86"
(98.1 mm)
3.86"
(98.1 mm)
120 Volt ac, load to 16 amps
/