2. DECKED
  3. ATB1SST

DECKED ATB1SST Owner's manual

  • Hello! I've reviewed the installation instructions for the DECKED Snack Tray RC671. This document explains how to install the tray on either side of the toolbox without a ladder, using a Phillips head screwdriver. I'm ready to answer any questions you might have about the installation process or the features of the tray.
  • Can this tray be installed on both sides of the Tool Box?
    Do I need a ladder to install this Snack Tray?
    What type of screwdriver should be used?
    Should I use power tools for installation?
    How tight should I tighten the screws?
PART RC671
SNACK TRAY INSTALL INSTRUCTIONS
These can be installed on the driver’s side or passenger’s side of the Tool Box with no ladder.
Press Snack Tray firmly into Tool Box
- the DECKED logo should read as shown.
Insert four screws in screw locator holes.
Using a #2 Phillips screwdriver (no power tools, please!)
turn until the screw head is flush with the tray bottom.
Do not over-tighten.
Enjoy your new accomplishment in organization!
MIGHT BE USEFUL: Watch Snack Tray Installation video www.DECKED.com/snacktray-install
DECKED.COM | 208.806.0251 FOLLOW US ON:
A
DETAIL A
SCALE 1 : 3
A
DETAIL A
SCALE 1 : 3
/