DECKED ATB1SST Owner's manual

Type
Owner's manual
PART RC671
SNACK TRAY INSTALL INSTRUCTIONS
These can be installed on the driver’s side or passenger’s side of the Tool Box with no ladder.
Press Snack Tray firmly into Tool Box
- the DECKED logo should read as shown.
Insert four screws in screw locator holes.
Using a #2 Phillips screwdriver (no power tools, please!)
turn until the screw head is flush with the tray bottom.
Do not over-tighten.
Enjoy your new accomplishment in organization!
MIGHT BE USEFUL: Watch Snack Tray Installation video www.DECKED.com/snacktray-install
DECKED.COM | 208.806.0251 FOLLOW US ON:
A
DETAIL A
SCALE 1 : 3
A
DETAIL A
SCALE 1 : 3
  • Page 1 1

DECKED ATB1SST Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI