2. NutriBullet
  3. N12-1007

NutriBullet N12-1007 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the NutriBullet N12-1007 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
C. Plug the Power Base into an
electrical outlet. Place the Blade and
Cup assembly blade-side-down onto the
Power Base, lining up the Activator Tabs
with their corresponding openings.
D. Push the Cup and Blade assembly
down, pressing Activator Tabs onto the
Activator Buttons. Once the machine
is running, gently rotate the Cup and
Blade attachment to lock the unit into
place. The G Button on the front of the
unit will glow GREEN when extraction
begins. The Power Base will automatically stop running when
your NutriBlast is fully extracted. If the Power Base does not
stop a er one minute, unplug it and call Customer Service.
WHAT’S INCLUDED
PIECE
SET
12
For recipes, see the NutriBullet User Guide, the NutriBullet app and NutriLiving.com.
NUTRIBULLET is a registered trademark of CAPBRAN HOLDINGS, LLC. Copyright © 2016 CAPBRAN HOLDINGS, LLC. LOS ANGELES, CA 90025, USA. ALL RIGHTS RESERVED. MADE IN CHINA.
1 HIGH-TORQUE
POWER BASE
1 900-ML
COLOSSAL CUP
WITH
1 VESSEL GRIP
1 STAINLESS STEEL CUP*
(KEEPS DRINKS COOL FOR
UP TO 8HRS)
WITH 1 VESSEL GRIP
2 COMFORT
LIP RINGS
2 FLIP-TOP
LIDS
1 USER GUIDE AND
RECIPE BOOK
1 EXTRACTOR
BLADE
1 900-ML COLOSSAL
CUP WITH HANDLE
*For use with NutriBullet
1000 and 1200 SERIES
STAINLESS STEEL VESSEL WARNINGS:
• NEVER BLEND HOT LIQUIDS OR FOOD.
• NEVER BLEND FOR MORE THAN ONE MINUTE.
• DO NOT OPEN UNTIL BLADES STOP.
• DO NOT EXCEED THE MAX LINE WHEN FILLING THE CUPS.
HOW IT WORKS
A. Add ingredients into your Cup and
fill with liquid up to the MAX line.
B. Twist the Extractor Blade onto your
Cup and gently tighten to make sure
the vessel is sealed.
TO ACTIVATE ONE TOUCH
SMART TECHNOLOGY
BUTTON MODE:
A. Follow the Classic NutriBlast
Mode directions.
B. Within the first five seconds of
extraction—this function will not work
a er that—
press the G Button on the
front of the unit so it changes from GREEN
to BLUE. This will activate One Touch SMART Technology Button
Mode — a pre-programmed cycle that extracts at first in short
pulses, then one longer extraction period before automatically
powering o . If the Power Base does not stop a er one minute,
unplug it and call Customer Service.
Do not run multiple extraction cycles without allowing the unit to
cool down for at least one minute between cycles.
TO ACTIVATE CLASSIC
NUTRIBLAST MODE:
/