Britax B-Ready User manual

B-READY™ Stroller

User Guide

IMPORTANT: To ensure your child is as safe as possible, read all

instructions thoroughly before using this stroller. Store this manual for

future reference.

This product and its components are subject to change without notice.

Warnings.                                           .2

Features .                                           .4

In.the.Box.                                           5

Assembly .                                          .6

Operating.Instructions

Parking Brake                                          10

Attaching the Seat                                      10

Detaching the Seat                                      11

Folding                                               12

Swivel Wheels                                          12

Leg Rest                                              13

Reclining                                              13

Handle Angle                                          13

Securing.Your.Child.                                  14

Infant.Car.seat.Mode

Attaching Britax Infant Car seat Adapters                    16

Removing Britax Infant Car seat Adapters                    16

Attaching a Britax Infant Car seat                           17

Removing a Britax Infant Car seat                          18

Accessories .                                        19

Other.Available.Accessories .                           20

B-READY™.Stroller.Configurations.                      22

Care.and.Maintenance.                                25

Warranty.                                           26

Table of Contents

2

Section Title

WARNING!

DEATH or SERIOUS INJURY can occur:

•

Never leave child unattended.

•

Avoid serious injury from falling or sliding out. Always use harness to

secure child.

•

Do not use stroller for an infant younger than 6 months without an

infant car seat or bassinet.

•

Do not use stroller with a child who weighs more than 55 lbs (25

kg).

•

Do not use stroller with a child taller than 44 inches (111.8 cm).

•

Do not overload basket – Maximum weight in basket is 10 lbs (4.5

kg). Overloading the basket may cause the stroller to become

unstable.

• Do not overload the storage pouch - Maximum weight in storage

pouch is 1 lb (0.45 kg).

• Do not overload the seat-back storage pockets - Maximum weight in

storage pockets is 1 lb (0.45 kg).

• Do not overload the cup holder - Maximum weight in cup holder is

1 lb (0.45 kg).

• Do not place hot liquids in the cup holder.

•

Always make certain that the stroller is fully open and locked before

use.

•

Assembly of this stroller must be performed only by an adult.

•

Do not hang or place items on the stroller handle or frame except

for those approved by Britax. They may cause the stroller to become

unstable.

•

Only use Britax approved child restraints or car seats with this

stroller.

3

Section Title

WARNING!

DEATH or SERIOUS INJURY can occur:

•

Do not allow children to climb on or play with the stroller.

•

Never use stroller on stairs or escalators.

•

To avoid entrapment or pinching, do not fold or unfold stroller when

child is in or near stroller.

•

Stroller is intended for walking speed only. Do not use while jogging,

skating, etc.

•

Always set the parking brake when stroller is not moving.

•

Only use accessories and replacement parts approved by Britax

Child Safety, Inc.

• Do not lift the stroller by the arm bar of the seat.

•

Read and understand these instructions before using this product.

To ensure proper use, store this user guide in a convenient place

so it can be consulted often. Failure to follow all warnings and

instructions could result in serious injury or death.

• When using an infant car seat with this product, refer to the product’s

user guide for maximum weights and other instructions.

• Do not exceed the manufacturer’s maximum weight limit when using

an infant car seat with this product.

4

• Actual product may vary from images.

Canopy

Chassis.

Lock

On.right.side.

of.frame

Arm.Bar

Harness

Buckle

Leg.Rest

Front.Wheels

Rear.Wheels

Rear.Wheel.

Release.Button

Mud.Guards

Storage.Pouch

Frame.

Release.

Lever

Handle.

Height.

Adjuster

Seat.Locking.Latch

Chassis.Socket

Release.Lever

Under-Seat.

Storage.

Basket

Swivel.

Wheel.

Locks

Front.Wheel.

Release

Features

5

Front.Wheels.x2

Storage.Pouch

Rear.Wheels.x2

Main.Seat

Arm.Bar

Cup.

Holder

Stroller.Frame

Rain.Cover

Mud.Guards.x2

Britax.Infant.Car.

seat.Adapters

In the Box

6

• Lift chassis lock lever and

open the frame

• Lift handle until frame locks

into upright position as

shown

• Slide mounting pins into the

housing on the frame until

they lock into place

NOTE: The Britax logo imprinted

on the wheel should be facing the

outside of the stroller

Unfolding

Front Wheels

Assembly

7

Rear Wheel

Housing

NOTE: Left and right wheels are

marked with an L or R and are from

the perspective of standing behind

the stroller

• Hold in the release button in

the center of the wheel and

slide the mounting pin into

the housing on the rear axle

• Slide the mud guard onto

the mounting bracket above

each rear wheel housing

until it locks into place

Rear Wheels

Mud Guards

Assembly

8

• Attach hook and loop strip

to the strip on the inside of

the under seat basket

• Attaching: slide the pins into

the mounts on the seat until

they lock into place

• Removing: push the release

button on the bottom of the

mounts and pull arm bar out

NOTE: Armbar or cup holders must

always be used to avoid finger

entrapment in the open connectors

Arm Bar

• Slide the hook and loop

fasteners on both sides of

the pouch through the tabs

above each back wheel

Storage Pouch

Assembly

9

• Press and hold the release

button in the center of the

wheel and pull away from

the wheel housing

• Line up the arrow with the

pin just below the folding

release lever and snap the

cup holder mount onto the

frame

Removing Front

Wheels

Removing Rear Wheels

Cup Holder

• To remove, rotate the cap

in the direction indicated

by the arrows until wheel

releases

Assembly

10

Parking Brake

Attaching the Seat

• Step on the brake pedal

until the indicator window

changes color

Red indicates the brake is engaged

and green indicates the brake is off

• Insert the seat locking

latches into both chassis

sockets

• Push down until an audible

click is heard

NOTE: Seat attaches forward or rear

facing

Operating Instructions

11

Detaching the Seat

• Pull up on the seat to ensure

that it is locked into place

correctly

IMPORTANT: Always remove child

before detaching the seat

• Lift both release levers on

each seat locking latch at

the same time

• Lift upward

Operating Instructions

12

Always apply brake and remove

children before folding the stroller

• Pull up both frame release

levers located just below

the stroller handle, and step

back while guiding stroller

downward

• Continue folding until the

chassis lock engages

TIP: You may need to compress the

frame to engage the chassis lock

• Toggle the wheel lock on

the back of the front wheel

housing up or down.

Down will lock wheels

forward and up will allow

wheels to swivel

Folding

Swivel Wheels

Operating Instructions

13

• Depress buttons on both

sides of the leg rest hinge

and hold while raising or

lowering the leg rest to the

desired position

• Lift and hold the recline

lever on the back of the seat

and hold while raising or

lowering the seat back to the

desired position

• Depress and hold the two

release buttons on the inside

of the handle assembly

while raising or lowering

the handle to the desired

position

Leg Rest

Recline

Handle Angle

Operating Instructions

14

• Release the harness by

depressing the button in the

center of the buckle while

pulling the two top tongues

away from the buckle

assembly

• Sit child in seat and unzip

the seat back to access the

harness height adjuster

TIP: You may need to loosen the

harness to adjust the harness height.

• Squeeze the adjuster to

release and slide up or

down to one of the three

positions

NOTE: Adjusted harness height

should be at or above the shoulders

of the child

Securing Your Child

15

• Tighten or loosen the

harness straps by sliding the

harness adjusters

Buckle tongues separate for added

safety. To reconnect buckle tongues,

line up the two pieces and slide the

upper portion onto the track on the

lower piece

• Buckle the harness by

pressing the tongues on

the harness straps into the

buckle assembly

NOTE: Ensure the straps are

not twisted as they may become

uncomfortable for the child

Securing Your Child

16

Attaching Britax Infant

Car seat Adapters

• Slide each of the adapters

under the infant car seat

handle and into the shell

until they click into place

There is a left and right adapter and

orientation should be as shown

• Pull downward on the

adapter to ensure that it is

secure

Removing Britax Infant

Car seat Adapters

• Pull the release lever and

slide the adapters down and

out of the infant car seat

shell

Infant Car seat Mode

17

Attaching a Britax

Infant Car seat

• Align the adapters and insert

into both chassis sockets

• Push down until a click is

heard

• Pull up on the seat to ensure

that it is secure

Infant Car seat Mode

18

Removing a Britax Infant

Car seat

• Lift both release levers on

each seat locking latch at

the same time

NOTE: When removing infant car seat

from stroller, take care that the car

seat does not tip and fall

• Lift upward

NOTE: Once the infant car seat

adapters are installed, they do not

need to be removed. The infant car

seat will fit into the vehicle base while

they are attached

WARNING

• The infant car seat adapters are ONLY compatible with Britax

infant car seat and ONLY models from 2009 or newer

• Attempting to fit them into another infant car seat can

damage the car seat or cause the car seat to fall

• Use the universal adapter (sold separately) for infant car

seats other than Britax infant car seats

Infant Car seat Mode

Page is loading ...

Britax B-Ready User manual

Britax B-Ready User manual

Related papers

Other documents