BitFenix Nova Mesh SE TG 4ARGB Installation guide

BitFenix
Brand
BitFenix
Model
Nova Mesh SE TG 4ARGB
Type
Installation guide
6+6 Controller Introduction
6+6 Controller
•Rated voltage DC12V/DC5V
•With 6 ARGB 3Pin 5V sockets, 6 12-volt
fan sockets and a ARGB header connected
to Motherboard
•A single ARGB socket can bear 80 LEDs
•A single fan socket can withstand 6 12-volt
fans
•A total of 60 lighting illumination modes
•If you connect the controller to the
Motherboard, long press the switch for
the first time to enter the Motherboard
follow mode and long press the switch
again, the fan will flash white light then
turn off.
•If you only use the controller, long press
the switch and the LED will flash white
light then turn off.
•This controller compatible with Asus
AURA SYNC, MSI Mystic Light, Gigabyte
RGB Fusion 2.0 and Asrock Poloychrome
SYNC
6+6 Controller
Connect to Fan
Addressable RGB 3pin 5V socket
Connect to Motherboard Addressable RGB 3pin socket
Front RGB switch
SATA power cable (Connect to Power supply )
If your motherboard comes with VDG socket, please go to BitFenix support ticket for assistant.
Connect to
Motherboard
Fan socket
6+6 Controller
Please remove the 6+6 controller from the case ,
before you connect the ARGB cable or fan.
Remove
S ATA
ARGB LED connector
Connect to ARGB LED
connectoron motherboard or
controller with 3pin.
Fan power header
Connect to fan header
on motherboardor
controller for power.
6+6 Controller
How to connect ARGB header on 6+6 controller
Each socket support up to 80 LEDs
6+6 Controller
6+6 Controller
Please turn it over and plug in
How to connect fan header on 6+6 controller
Each socket support up to 6 fans
6+6 Controller
How to connect by Motherboard Addressable RGB 3pin socket
•If you connect the controller to the Motherboard, long press the switch for the
first time to enter the Motherboard follow mode and long press the switch again,
the fan will flash white light then turn off.
•This controller compatible with Asus AURA SYNC, MSI Mystic Light, Gigabyte RGB
Fusion 2.0 and Asrock Poloychrome SYNC
•A total of 60 lighting illumination modes
•If you connect the controller to the Motherboard, long press
the switch for the first time to enter the Motherboard
follow mode and long press the switch again, the fan will
flash white light then turn off.
•If you only use the controller, long press the switch and the
LED will flash white light then turn off.
•This controller compatible with Asus AURA SYNC, MSI
Mystic Light, Gigabyte RGB Fusion 2.0 and Asrock
Poloychrome SYNC
Please press LED button to switch the light mode
6+6 Controller
How to daisy chain with 6+6 controller and other Bitfenix ARGB accessaries
6+6 Controller
How to daisy chain with 6+6 controller and other Bitfenix ARGB accessaries (Gigabyte MB version)
Spectre SE Addressable RGB Introduction
Spectre SE Addressable RGB
Spectre SE Addressable RGB
•This fan compatible with Asus AURA SYNC,
MSI Mystic Light, Gigabyte RGB Fusion 2.0
and Asrock Poloychrome SYNC
Dimension 120 x 120 x 25mm
Rated voltage DC 12V
Start Voltage ≦6V
Speed 1200 ±200 RPM
Max Air Flow 33.2 CFM
Noise 24.4 dB-A
LED 8 PCS
Spectre SE Addressable RGB
Connect to ARGB LED
connectoron motherboard
or controller with 3pin
ARGB LED connector
Connect to fan header
on motherboardor
controller for power
How to connect ARGB header on 6+6 controller
Each socket support up to 80 LEDs
Spectre SE Addressable RGB
Spectre SE Addressable RGB
Please turn it over and plug in
How to connect fan header on 6+6 controller
Each socket support up to 6 fans
6+6 Controller
How to daisy chain with 6+6 controller and other Bitfenix ARGB accessaries
6+6 Controller
How to daisy chain with 6+6 controller and other Bitfenix ARGB accessaries (Gigabyte MB version)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18

BitFenix Nova Mesh SE TG 4ARGB Installation guide

BitFenix
Brand
BitFenix
Model
Nova Mesh SE TG 4ARGB
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents