Avanti DD1-21 Operating instructions

Hello! I've reviewed the user manual for reversing the door of a refrigerator. This document contains detailed instructions with diagrams on how to reverse the door. It outlines the steps for removing and reinstalling parts, and includes safety warnings to avoid damage during the procedure. I'm ready to answer any questions you have about the process or the device.
What tools are required for reversing the door?

Should the unit be unplugged during the door reversing process?

Is it okay to lay the unit flat?

1.Remove the top right hinge cover.

2.Undo the screws.Then remove the

hinge bracket.

5.Remove the door stopper from the bottom right side of the door. Find the left side door

stopper in the accessory bag and install it on the bottom left side of the door.

7. Refit

12.Put the hinge cover and the screw cover

back.

13.With the doors closed,check that the doors

are aligned horizontally and vertically and

that the seal is closed on all sides before finally

tightening the bottom hinge.Re-adjust the

levelling feet as needed.

11.

10.